CEN Matrix TR
#77
lockmouth - we will be running at hx-raceway sunday, come on over if you can make it. i sure hope the weather holds out!!
jlo
jlo
#79
Tech Master
iTrader: (33)
NO E-CLIP MOD
I got the hinge pin upgrades for the front upper and the front lower hinge pins, but that left me with the e-clips on the outer arms front and back.
I just hate e-clips so I decided to pull out the dremel and solve this problem. I shaved the hinge pin down first, then I made holes in each arm on the front and back side close to the hinge pin hole an used a button head screw to hold them in.
Here is a link to the upgraded capture pins for the front upper and lower.
Front upper
http://www.carolinasrc.com/Webstore/...idproduct=3402
Front lower
http://www.carolinasrc.com/Webstore/...idproduct=3401
I just hate e-clips so I decided to pull out the dremel and solve this problem. I shaved the hinge pin down first, then I made holes in each arm on the front and back side close to the hinge pin hole an used a button head screw to hold them in.
Here is a link to the upgraded capture pins for the front upper and lower.
Front upper
http://www.carolinasrc.com/Webstore/...idproduct=3402
Front lower
http://www.carolinasrc.com/Webstore/...idproduct=3401
#80
Lockmouth, that is an awsome idea!! and it looks great.
#82
Tech Master
iTrader: (33)
Originally Posted by jfc_tech
its iin the blog! .. great stuff... u deserve a pat in the back lockmouth. genius!
#84
I'm not a big fan of CEN , but that truggy looks very nice.
#87
Tech Master
iTrader: (33)
NO MORE CENTER BONES (CVD) UPGRADE!!!!
If you guys are like me you hate dog bones
The CEN Matrix TR FRE came with cvds in the front and rear, but they forgot about the center
Here is the fix, get the center cvds for the Hotbodies Lighting Pro-R.
They are a pefect fit, but could be a mm or 2 longer.
I shimmed the outside of the pinion with two small shims
(included with the kit) and one 8mm washer that I got from my local hardware store. This will shim the cvd closer to the outdrive of the center diff and will also take out all of the backlash between the pinion and ring gear in the diff case.
Here are a few pictures of the items I used.
The CEN Matrix TR FRE came with cvds in the front and rear, but they forgot about the center
Here is the fix, get the center cvds for the Hotbodies Lighting Pro-R.
They are a pefect fit, but could be a mm or 2 longer.
I shimmed the outside of the pinion with two small shims
(included with the kit) and one 8mm washer that I got from my local hardware store. This will shim the cvd closer to the outdrive of the center diff and will also take out all of the backlash between the pinion and ring gear in the diff case.
Here are a few pictures of the items I used.
#88
Our TR came in today cant wait to start building it. Lockmouth, thats exactly what we plan on doing for the center drives.
How about race results? anybody other than Gene have any to report? Had a chance to see a few run at CRCRC. They looked good.
How about race results? anybody other than Gene have any to report? Had a chance to see a few run at CRCRC. They looked good.
#89
Tech Master
All 4 Cen drivers made the A-main at the 2007 Losi Nitro Winter Champs.
Andy Smolnik - 4th
Gene Hickerson - 5th
Kyle Sokol - 8th
Chris Sytsma - 12th
There was 4 Cen Matrix TR Arena's, 3 Losi Protos, 1 Kyosho, 1 Jammin, and 2 Mugens.
Andy Smolnik - 4th
Gene Hickerson - 5th
Kyle Sokol - 8th
Chris Sytsma - 12th
There was 4 Cen Matrix TR Arena's, 3 Losi Protos, 1 Kyosho, 1 Jammin, and 2 Mugens.
#90
Tech Master