GulfstreamIVCap

iTrader: (1)

Folks,

My son and I are putting together a Kyosho MP10, and not certain we have the center diff, and the brake setup properly. Currently, the diff is binding on one of the hooks used for the brake, and only the front wheels move, when turning the center diff gear, the rear ones do not. I've attached some pics. Can anyone tell me what we've done wrong?

Any build videos out there? I tried Google, but didn't find anything.

Thanks in advance for any assistance!

J.Whiting

iTrader: (63)

Top plate is backwards. Take off and rotate 180*

GulfstreamIVCap

iTrader: (1)

Thank you. this helped a lot!

J.Whiting

iTrader: (63)

welcome.. also lots of good info in the mp10 and mp10t threads..

AEracer575

Also, your diff mounts are wrong. You have the rear one on the front and the front one on the rear. Note the slight concave on the one mount. That is for clutch clearance.

CaptainHowdyt13

iTrader: (33)

I think you're missing the shims underneath the diff mount.

ceh329

iTrader: (11)

I thought you only need the shims if you run a bigger gear?

J.Whiting

iTrader: (63)

correct. the 47 needs the shims.