R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro Off-Road (https://www.rctech.net/forum/nitro-off-road-130/)
-   -   Agama A319 (https://www.rctech.net/forum/nitro-off-road/1043668-agama-a319.html)

Big Will 05-24-2019 06:35 AM

Agama A319
 
https://cimg1.ibsrv.net/gimg/www.rct...50667a5fa9.jpg
The new buggy Features and Designs are listed below:

- Chassis:
The new buggy chassis plate features a new shape at the front and rear, the rear has more torsional flex whilst still remaining longitudinally stiff, the front of the chassis has also been more angled to offer better clearance from the tire at full lock as well as more roll clearance in long sweeping turns. The chassis is also narrower to provide a lower overall weight whilst keeping the overall width and driving characteristics associated with that. The chassis also no longer has the holes in the bottom of it, because the gearboxes are now mounted higher.

- Radio Tray
A entirely new radio tray makes for better servo position, more room in the boxes for all of the electrical equipment as well as a quicker and easier removal of the radio tray and servos.

- Split center diff mount
A split center diff mount is now used, the diff is now rotated with the spur to the back and a new brake linkage system is used for more consistent braking throughout a run.

- Drivetrain
There is a new drivetrain used throughout the new buggy, new 39T Crown gears mate up to new 12T pinion gears, this makes the buggy easier to drive with more corner speed, a smoother more efficient transmission and a class leading durability. A new 48T spur gear and 13T clutch bell are used to maintain the correct final drive ratio.

- Lightweight one piece rear wing mount
A new lightweight one piece wing mount has been utilized it offers more durability and a lower center of gravity whilst also allowing for more tuning options with a range of height adjustment where it mounts to the rear shock tower.

- Shock towers
With the new front and rear geometry, new shock towers have been used that give the optimum shock length for all conditions and the new rear tower has the various wing mount height holes.

- Wishbones hangers
New A/B/C/D blocks are used on the new buggy they offer updated roll center and anti squat positions more optimized for the new geometry that is presented throughout the new buggy.

- Steering Posts
New longer steel steering posts are used, this is for compatibility with the new raised front gearbox and steering assembly.

- Steering Top Plate
A new composite steering top plate as been produced in line with the new steering post positions on the chassis plate as well as the new raised front gearbox.

- Chassis Braces
New chassis braces are used with a single chassis mounting point on both the front and rear, a secondary rear brace is also included in the box for a further reduction in chassis flex.

-Fuel Tank
A new fuel tank has been made with a lower and wider shape for lowered center of gravity and it also now has a higher capacity that is in line with the legal specification.

-Bodyshell
New nitro body shell, for better durability, performance and to fit to the new chassis shape.

-Chassis side Guards
The chassis side guards have a new shape and height for better protection from the ingress of damp and dust and they will now fit the new chassis shape. They also now use a wraparound design for even better protection in all racing conditions.

-Caster Block
A new 17.5 degree composite caster block is included in the box

-Steering Plates
New steering plates are used to change the Ackerman of the buggy, making it easier to driver and more rotation on low speed and smoother at high speed.


New Parts List A319:

57220 Front shock tower (Updated from Performance Pack)

57221 Rear shock tower (Updated from Performance Pack)

37001 Chassis

497175 17.5 Degree composite caster block

38225 Steering Posts Steel Material (Updated from Performance Pack)

2009 Front steering top plate

39063S Steering Rack Plate Short

31011D Steering Hub Plate (double SV/DW01)

2009 Front/Rear Chassis Braces

47201/2/3/4 - A/B/C/D blocks (Performance Pack)

8939/8839 Crown gears (optional gearing)

8912 Pinion gears (optional gearing)

8848 Spur (optional gearing)

8013 Clutch bell (optional gearing)

28219 Front Drive Cup (Back to 28219 F+R)

28243-L3 Dogbone Drive Cups

38317-78 Front Dogbone Driveshaft

38317-109 Rear Dogbone Driveshaft

2001 Fuel tank

34908 Full radio tray

2014/37207/38233 Centre diff mount/top plate and all respective items

30012 Body-shell

31017 Side guards

31006 Rear wing mount (Performance Pack)

Steering Links

1004-SR/1004-SF Gearbox Spacers - Front and Rear (Performance Pack)

31019 Steering Plastics (Bellcrank)

SKD Droop Screws

Items that are carrying forward from A215SV:

Suspension Bushing Inserts (21116-B)
Diff Outdrives (now 28219 only)
Diff Cups (28228)
Hinge Pins Inner/Outer (38227/8238)
Front hinge pin (32239F)
Wishbones Front/Rear (21003/31002-S)
Camber Links
Turnbuckles
Gearboxes Front/Rear (1004/21005)
Driveshafts Front/Rear (34902/24902)
Rear hubs (21010)
Caster block will be compatible (39716)
Steering hub (31011)
Shocks (24911)
Engine mounting/clutch assembly
Wing (1901)
Brake Disks (8009)
Internal Diff Gears (4118)
Roll Bars (28023/8325)

Big Will 05-24-2019 09:43 AM

https://cimg1.ibsrv.net/gimg/www.rct...a9a49a4acf.jpg

https://cimg6.ibsrv.net/gimg/www.rct...eb80db535d.jpg
New radio tray and center diff / brake mount

Big Will 05-24-2019 09:45 AM

https://cimg9.ibsrv.net/gimg/www.rct...0a12ddc40f.jpg

Big Will 05-24-2019 10:10 AM

https://cimg2.ibsrv.net/gimg/www.rct...2054be104c.jpg
https://cimg9.ibsrv.net/gimg/www.rct...f80c80a424.jpg
https://cimg7.ibsrv.net/gimg/www.rct...7cec46b18e.jpg
https://cimg4.ibsrv.net/gimg/www.rct...bd01997ed6.png

Big Will 05-24-2019 10:11 AM

https://cimg2.ibsrv.net/gimg/www.rct...7c751e7674.jpg

mckibbint 06-05-2019 04:20 AM

So has anyone picked one of these up and had it out running yet? Interested to hear how it drives compared to the SV.

blktransam 06-05-2019 05:42 AM

not ava, yet, team guys should be seeing them very soon

DIME:RC 06-07-2019 04:29 AM


Originally Posted by blktransam (Post 15460371)
not ava, yet, team guys should be seeing them very soon

meant to be getting my by end of next week, start of the week after

mckibbint 06-07-2019 03:42 PM


Originally Posted by DIME:RC (Post 15461310)


meant to be getting my by end of next week, start of the week after

Would be really interested to hear your thoughts on the differences to the SV when you get it.

speedy2 06-09-2019 11:47 AM

Lutz car..

https://abload.de/img/62234318_238851064808bakx7.jpg

speedy2 06-09-2019 11:48 AM

https://abload.de/img/62155426_23885106814108kb4.jpg

speedy2 06-09-2019 11:48 AM

https://abload.de/img/61983603_23885107080801kjn.jpg

speedy2 06-09-2019 11:49 AM

https://abload.de/img/61975634_238851077808uijub.jpg

speedy2 06-09-2019 11:49 AM

https://abload.de/img/62473458_238851062141zyj4o.jpg

Jomo918 06-09-2019 11:49 AM

This car just dominated the AMS 10.0 race!!! Great job Ryan Lutz!!!


All times are GMT -7. It is currently 03:04 AM.

Powered By: vBulletin v3.9.3.6
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.