521LikesTLR 8ightX
03-15-2019, 09:43 PM - Wikipost
|
|||
|
|||
|
06-09-2019, 02:18 PM
#766
Suspended
More of a dakota/program issue - hes had more DNF's than lutz. Savoya isnt having issues
06-09-2019, 02:27 PM
#767
Will the Mugen box work with the 8ight X does it need to be modified.
06-09-2019, 05:30 PM
#768
Cheers.
06-09-2019, 07:07 PM
#769
Is the 8xe from tower going to come in the new nitro kits?
06-10-2019, 05:39 AM
#770
Anyone have thoughts on this car compared to a HB?
06-10-2019, 09:35 AM
#771
06-10-2019, 04:13 PM
#772
Tech Regular
Its not the car that he has been having problems with. I watched the race and It looked like he was the fastest guy there he just has not had any Luck at all when it comes to Nitro. The Worlds he was in the transfer spot in his semi got taken out and flamed out why upside down missed the main. Nitro Challenge he drove from last to second taking the spot from the guy that won the worlds. Silver state he got out to a huge lead in truggy and his truck broke going over the back double. In Buggy same thing he was out front and car didn't turn going into the corner and out. AMS he drove to the front making it look easy then had some mistakes and fell back then problems start happening. No Luck but bad Luck. He dominated the A2 in E buggy and got the overall.
06-11-2019, 08:52 AM
#773
06-11-2019, 09:16 AM
#774
06-11-2019, 10:16 AM
#775
Dakotah has been working through issues here and there. Worlds was a flame out in a bump spot. He was having trouble with the fuel he was having to use there as it was different. Silver state, he had a cell go bad in a receiver pack (not the dynb0510). AMS he had a pressure line come off the tank. He had this zip tied and must have missed a little with the zip tie placement. It happens, we are all human. Still a bummer for him but he is pushing forward and pumped for nats!
06-13-2019, 09:00 PM
#776
Lots of setup sheets out there and most of them are running Mugen or AE springs.... any idea why and are there any rate charts that compare different springs for different companies?
Are the Mugen springs being used the 70mm and 86mm ones?
A lot of setup sheets list Mugen 9.0 front springs, but there seem to be a few different weight springs, I’m assuming the wire size is different, anyone know which set their talking about?
Thanks guys!
Are the Mugen springs being used the 70mm and 86mm ones?
A lot of setup sheets list Mugen 9.0 front springs, but there seem to be a few different weight springs, I’m assuming the wire size is different, anyone know which set their talking about?
Thanks guys!
Last edited by dickie doyle; 06-14-2019 at 08:55 AM. Reason: typo
06-14-2019, 11:42 AM
#777
Mugen are the 1.6 version. 8.75 and 10.25 or 10.5. They are better on square edged bumps.
06-16-2019, 03:17 AM
#780