2wd Stampede/MJ Brushless Gearing Advice
07-11-2014, 01:24 PM
#1
2wd Stampede/MJ Brushless Gearing Advice
Need some gearing advice for for some MJ/Stampede trucks. First I have a stock MJ 'Digger I am putting a HW ESC in and a 13.5 sensored motor. The motor is a 3040kv Turnigy Trackstar. What would be a good place to start with gearing that won't overheat anything? Running 2s 50c 5000mah LiPo.
The second truck is a 2wd 'Pede I am building up now. Will end up having Clod tires on it and a 150amp HW ESC and a HW 10T 3900kv unsensored motor. Running 3s 65c 5300mah. Any idea where to start for gearing?
Thanks!
-Joe
The second truck is a 2wd 'Pede I am building up now. Will end up having Clod tires on it and a 150amp HW ESC and a HW 10T 3900kv unsensored motor. Running 3s 65c 5300mah. Any idea where to start for gearing?
Thanks!
-Joe
07-12-2014, 04:14 PM
#2
Anyone have a good starting point? Blew up the stock motor today so I'll be putting in the system tomorrow. Will start with the stock gearing and see what I get for temps I guess.
-Joe
-Joe
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
