GS Storm SUT Pro
#1
GS Storm SUT Pro
put this in the wrong thread I think anyhow do any of you guys run one can anyone tell me the good/bad/ugly on this truggy? Seems all I have seen or read about is from the magazines and we all know how that goes.....
James
James
#2
Tech Master
iTrader: (18)
HELP !!!!
Has anyone here can share his sut pro setup? I race in a medium size track(not too hard soil track). Oil diff - 10k front, 50k center, 3k rear. Shock spring - pink or orange front and white for buggy - rear. Shock oil 35 front, 30 rear. Steering - turnbuckle mid at steering brace. Shock position - front tower inner-arms mid , rear tower outer-arms mid. Gears 54/13, clutch spring ofna. Engine - GS .21 pull start. My problem is the initial acceleration. The kit wont react immediately. Is it the engine?
#3
putok: have you tried the 12T clutchbell yet? ill get mine tomorrow
#4
Go down to at least 30k in the center maybe even 10k. A 12t will also help inital acc. and low end. What opipe are you running? You may want to look at a little heavier in the shocks, I am running 45 all around.
#5
Tech Master
iTrader: (18)
Originally Posted by psunitro
Go down to at least 30k in the center maybe even 10k. A 12t will also help inital acc. and low end. What opipe are you running? You may want to look at a little heavier in the shocks, I am running 45 all around.
Marvi : pre tried the 12t last sunday and now it react immediately. dont know if it will affect the top speed. Also check my carb had a binding between the carb flex rubber cover and the brake shoe screw.
#6
Tech Apprentice
hey anyone have any pro parts they want to get rid of??? I have 1 pro and converting a rtr into another one. i run picco .26's in both. I run 5/30/3 and seems to work great. 40 all the way around in the shocks with light blue springs at all four corners.All this with a 13 clutch bell and a o63 ofna pipe.
Anyways if you have any spare PRO parts and don't mind shipping let me know please. id throw up a pic but its to big and i dont know how to fix it sry boys.
PEACE!!
P.S. im in Alberta,Canada
Anyways if you have any spare PRO parts and don't mind shipping let me know please. id throw up a pic but its to big and i dont know how to fix it sry boys.
PEACE!!
P.S. im in Alberta,Canada
Last edited by iceman123; 10-01-2005 at 01:29 PM.
#7
Tech Initiate
HAY just put my os t-z in my gs sut-ce it fills great super fast good bottom end cant wate to get it on the track............
#8
Originally Posted by iceman123
hey anyone have any pro parts they want to get rid of??? I have 1 pro and converting a rtr into another one. i run picco .26's in both. I run 5/30/3 and seems to work great. 40 all the way around in the shocks with light blue springs at all four corners.All this with a 13 clutch bell and a o63 ofna pipe.
Anyways if you have any spare PRO parts and don't mind shipping let me know please. id throw up a pic but its to big and i dont know how to fix it sry boys.
PEACE!!
P.S. im in Alberta,Canada
Anyways if you have any spare PRO parts and don't mind shipping let me know please. id throw up a pic but its to big and i dont know how to fix it sry boys.
PEACE!!
P.S. im in Alberta,Canada