Lost with tqi.......
#1
Lost with tqi.......
My tqi will not stop blinking green rapidly...it says it is because its searching for throttle trim, but it won't let me go into the menu....
It worked fine until i plugged in my CC fan.
I also noted that my servo is sluggish.....and when i plug stuff into my reciever, the board you plug it into, is loose. I can move it up and down...
Everything works fine i can drive the car but its just blinking green. I also tried to plug out the fan and servo and try it and it still blinked....
Any help would be appreciated. My reciever is displaying normal colors.
It worked fine until i plugged in my CC fan.
I also noted that my servo is sluggish.....and when i plug stuff into my reciever, the board you plug it into, is loose. I can move it up and down...
Everything works fine i can drive the car but its just blinking green. I also tried to plug out the fan and servo and try it and it still blinked....
Any help would be appreciated. My reciever is displaying normal colors.
#2
Leave it to Traxxas to defy the owner's manual and logic.
Try an hpi tf-20. Way simpler
Try an hpi tf-20. Way simpler
#4
I figured out it wasn't my servo.
I got it to go solid after reprogramming it multiple times. during when it was solid, it was doing the low battery signal. Then a couple hours later it went back to the flashing green... so i will get some double a's tommorow and report back.......
I got it to go solid after reprogramming it multiple times. during when it was solid, it was doing the low battery signal. Then a couple hours later it went back to the flashing green... so i will get some double a's tommorow and report back.......