E-Revo Brushless Gearing?
#1
E-Revo Brushless Gearing?
ok i have the Mamba Monster V3 w/ a Feigao 10xl motor what should i run my gearing at?
would stock be ok which is 32p 19t Pinion and a 0.8P 68t Spur?
i will be running x2 Team Orion 2s 5000Mah 20c Lipos
thnx i don't want to burn up motor or ESC it won't have a heat sink yet rc-monster has them outta stock *sigh*
would stock be ok which is 32p 19t Pinion and a 0.8P 68t Spur?
i will be running x2 Team Orion 2s 5000Mah 20c Lipos
thnx i don't want to burn up motor or ESC it won't have a heat sink yet rc-monster has them outta stock *sigh*
Last edited by InsaneRC; 04-02-2009 at 03:59 PM.
#6
Tech Lord
iTrader: (21)
I don't own a Revo - but I have used BrianG's speed calculator to gear 3 rcs with good results. If nobody here can offer direct help based on thei experience, try the Revo forum on RC Monster - its devoted to Revos - conversions and the E-Revo.
http://www.rc-monster.com/forum/forumdisplay.php?f=24
http://www.rc-monster.com/forum/forumdisplay.php?f=24
#7
Tech Lord
iTrader: (21)