ammdrew

iTrader: (25)

Yes we have locked in the dates and the Space so start prepping now.

MMR 08 Electric Challenge.

Dates April 19 & 20 2008

Location:
St Therese
18323 Mtka Blvd
Deep Haven MN

Surface RCP
Size School Gym
Drivers Stand, Stage middle Gym 20 Ft wide

Pits, Tables in Lunch room and Halls.
Power, you may need extension cords and powerstrips, very similar to the Armory

Times:

Classes:

1/18th Spec, this will be a series Points Race

1/12th Stock 27T and 17.5, and Super Stock 13.5 and 19t

1/10th Sedan Stock 27T and 17.5, and Super Stock 13.5 and 19T

More Details to follow:

ammdrew

iTrader: (25)

For entry form
http://molzermoweryracing.com/images...8entryform.jpg

ammdrew

iTrader: (25)

Entry List to date, will be updated often

1/18 Spec
Allan Pfromm
Andrew Mowery
Conner Pfromm
DJ Joint
Joe Zaire
Justin Olson
Phil Olmon
Scott Wyberg


1/12th Stock
Conner Pfromm
Kevin Olson
Mike Mowery
Phil Olmon
Scott Wyberg

1/12th SS
Andrew Mowery
Joe Zaire
Justin Olson
Scott Beamish

1/10th Stock
Allan Pfromm
Conner Pfromm
Mike Mowery

1/10th SS
Allan Pfromm
Andrew Mowery

ammdrew

iTrader: (25)

Entry List to date, will be updated often

1/18 Spec
Allan Pfromm
Andrew Mowery
Conner Pfromm
DJ Joint
Jared Mowery
Joe Zaire
Justin Olson
Mike Burk
Malcolm McInnis
Molly McInnis
Phil Olmon
Scott Wyberg


1/12th Stock
Conner Pfromm
Kevin Olson
Mike Mowery
Phil Olmon
Scott Wyberg

1/12th SS
Andrew Mowery
Cary Beck
Jari Taskila
Joe Zaire
Justin Olson
Scott Beamish

1/10th Stock
Allan Pfromm
Conner Pfromm
Mike Burk
Mike Mowery

1/10th SS
Allan Pfromm
Andrew Mowery
Jari Taskila

Mr. Bubby

iTrader: (6)

Wonderin' what the tire of choice is going to be for this race.....I've never run on that stuff before. What'dya think..Yellow's and Black's for 1/12, and double pink's all the way around for the 1/10. What's up with that

ammdrew

iTrader: (25)

yellow black on 12th seem to work well, I have been doing most of our spec testing with it. next couple of Sundays you can run on it with the 12th.

I ran the same car tires and setup last year on the big track with no issues. I think joe ran some softer compounds.

Double pinks around or Magenta( Parma) seem to be the sedan ticket.

pokie

iTrader: (1)

What's the date and times we can test the carpet? What is RCP?

ammdrew

iTrader: (25)

we are running spec 12th the next couple of Sundays at MMR Direct.

You should expect a similar type setup to running at Duluth and The Barn.

Here is the link to last years forum.
http://www.rctech.net/forum/showthre...=151899&page=2

RCP is a rubber matt type surface. we get similar grip to med high bite ozite that is consistent through the track and tend to groove very quickly. We use gripper for traction additive.

ammdrew

iTrader: (25)

Associated Electronics has Stepped up and joined as a Event Sponsor.

Adding to the Door Prizes with A RTR TC4 and Some great AE Team Apparel.

ammdrew

iTrader: (25)

Last Day to get your entry post marked and save the $5 on entry.

SHould be a good Show.

We have some interest in a Trans Am Race. Let me know with a email or post if you would like to run Trans Am and we can see if we have enough to add them in. We will make the decision this week.

Mark O'Brien

iTrader: (1)

Sounds like fun !!! I'll run 12thSS and "Christine" in the SS

ammdrew

iTrader: (25)

Entry List to date, will be updated often

1/18 Spec
Allan Pfromm
Andrew Mowery
Conner Pfromm
DJ Joint
Jared Mowery
Joe Zaire
Justin Olson
Mike Burk
Malcolm McInnis
Molly McInnis
Phil Olmon
Scott Wyberg


1/12th Stock
Conner Pfromm
Kevin Olson
Mike Mowery
Phil Olmon
Scott Wyberg

1/12th SS
Andrew Mowery
Cary Beck
Jari Taskila
Joe Zaire
Justin Olson
Scott Beamish
Tony Block
Mark O'Brien

1/10th Stock
Allan Pfromm
Conner Pfromm
Mike Burk
Mike Mowery

1/10th SS
Allan Pfromm
Andrew Mowery
Jari Taskila
Mark O'Brien

Centerline Racing

iTrader: (47)

Conner and I will run Trans-Am if you add the class...

How 'bout it Mark O'Brien, Dave Bruns, Dave Hallis, Jeff Brustad, Gary Pauna...

Let's fill the track with these things. We need to knock Conner off the throne!!

davo7

I am in. What are the rules on batteries and tires ???

ammdrew

iTrader: (25)

Trans Am would run under these rules:

Trans Am Class Rules and Specifications

Body Specifications: Late '60s to early '70s American pony car Vintage Trans-Am bodies only.


HPI part numbers:
17510 - 1970 Plymouth AAR 'Cuda
17519 - 1966 Ford Mustang GT
17508 - 1965 Ford Shelby GT-350
7494 - 1968 Chevrolet Camaro

Parma part numbers:
10143 - 1969 Z28 Camaro
10141 - 1970 Boss Mustang
10113 - 1970 'Cuda

Pegaus Hobbies part numbers:
PGH4001 - 1970 Camaro SS
PGH4002 - 1970 'Cuda
PGH4003 - 1970 Mustang

Body provided deck lid spoilers allowed (not wings). No additional skirts or raised/extended wings or air control surfaces allowed. Body must be trimmed at body trim lines. Full rear bumper required. It is highly preferred that bodies are detailed in race type livery in period-correct paint schemes.

Tire & Wheel Specifications:
The only tires allowed are HPI tire part #4793 front and #4797 rear, using stock tire inserts provided with tire and HPI Vintage wheels designed to fit these tires. Five or Eight spoke wheels available in various colors. 0mm offset front wheels and 6mm offset rear wheels are intended for 26mm width fronts and 31mm width rear tires. Grinding of tire tread is NOT permitted. Sanding of mold seam is allowed. HPI Vintage Slicks are not allowed.

Chassis Specification:
Four Wheel Drive touring car chassis only. Any era or brand 4wd chassis is allowed.

Motor Specifications:
Option 1: 27-turn ROAR stock motor: No FDR limit, bearings are allowed to replace stock bushings
Option 2: 17.5 brushless motor: 4.00 FDR limit (3.99 or below not legal)--obvious cars will have gearing teched. Main DQs or loss of qualifying times for offending cars. Timing advance is allowed.

An Excel spreadsheet (ZIP file) of most touring car chassis with all internal transmission drive ratios is available here. Use as a printed out sheet for quick reference, or plug in spur and pinions into open fields to calculate a given FDR of any chassis at the track.

Note: Outdoor asphalt tracks will have the option of mandating a 13.5 brushless/19T brushed motor choice.

Batttery Specifications:
4 cell NiCd or NiMh batteries
4600 mAh limit.

Ride Height Specification:
Minimum ride height is 4.5mm.

Weight Specification:
Minimum 1450g in race-ready trim

Race Specification:
5 minute qualifiers
8 minute mains


May get more crosses as stock will ne 17.5 or brushed for this race so it would be easy to use the same chassis both ways.