"targetingxmod" Traxxas E-Revo 1/16
#1
Tech Elite
Thread Starter
"targetingxmod" Traxxas E-Revo 1/16
So i got his some years ago second hand in my country....
It camed this way....
-Those photos where from the last owner....
Now... it's time for "targetingxmod" home!
-It comed with a 55spur and a 19T for what i remember... nahhhh go for 28T first!!
-Then 31T
-And check for temps.. all allright!
Video:
http://www.youtube.com/watch?v=sxd-tlj6_BQ
It camed this way....
-Those photos where from the last owner....
Now... it's time for "targetingxmod" home!
-It comed with a 55spur and a 19T for what i remember... nahhhh go for 28T first!!
-Then 31T
-And check for temps.. all allright!
Video:
http://www.youtube.com/watch?v=sxd-tlj6_BQ
+ YouTube Video | |
Last edited by targetingxmod; 11-18-2013 at 08:45 AM.
#2
some of your others are faster
#3
Tech Elite
Thread Starter
Yes, this not have ceramic bearings or 4s It is a bash machine by right!
I will have more to show...
Meanwhile i broked the chassis first time trying the strut bars.... they help to not brking in 2 pieces allright!
-A bulkhead from left side poped out! lol
-Mas em vez de comprar novo tentei resolver e felizmente correu bem, porque também não tinha partido totalmente senão só novo...
-Rolamentos na Bell crank
-Dark side...
I will have more to show...
Meanwhile i broked the chassis first time trying the strut bars.... they help to not brking in 2 pieces allright!
-A bulkhead from left side poped out! lol
-Mas em vez de comprar novo tentei resolver e felizmente correu bem, porque também não tinha partido totalmente senão só novo...
-Rolamentos na Bell crank
-Dark side...
#4
Tech Elite
Thread Starter
Last edited by targetingxmod; 11-18-2013 at 09:15 AM.
#5
Tech Elite
Thread Starter
Second video with more footage!
http://www.youtube.com/watch?v=ObCBp...ikp8ieGqmcvklw
There will be a third with a lot of minutes, but not for now!
http://www.youtube.com/watch?v=ObCBp...ikp8ieGqmcvklw
+ YouTube Video | |
There will be a third with a lot of minutes, but not for now!
#6
Tech Elite
Thread Starter
#7
Tech Elite
Thread Starter
More action:
https://www.youtube.com/watch?v=ZgCFFOgzyQw
https://www.youtube.com/watch?v=wIUd6TOiMW8
https://www.youtube.com/watch?v=ZgCFFOgzyQw
+ YouTube Video | |
https://www.youtube.com/watch?v=wIUd6TOiMW8
+ YouTube Video | |
Last edited by targetingxmod; 11-25-2013 at 12:03 PM.
#8
Tech Elite
Thread Starter
#9
Tech Elite
Thread Starter
#10
Tech Elite
Thread Starter
#11
Tech Elite
Thread Starter
#12
Tech Elite
Thread Starter
+ YouTube Video | |
+ YouTube Video | |
+ YouTube Video | |
+ YouTube Video | |
Allright! After these videos...
-Clean Time! Not a single piece broken, yet! Cross fingers....
#13
Tech Elite
Thread Starter
Meanwhile, christmas time made this:
-All afternon and all night playing on a grass field with the family. It was raining but not badly! The MERV survived a non stop 5 hours maraton with 30minutes pause only to charges in between each charge. Not a single piece broken yet! Cross finger's...
Grass is a friend of helis and Merv
-Then after clean time, i decided it was time to get rid of this little wires...
-That's the way i like it! Big and fat :P
Let's see on the next "massacre" if she pass the test! I have a feeling that i will see a little omph... on other's rc's that's what big fat cables and capacitors do! :P
Some flames will not be cool! Or maybe yes... a good excuse for better batery's, ESC :P
-All afternon and all night playing on a grass field with the family. It was raining but not badly! The MERV survived a non stop 5 hours maraton with 30minutes pause only to charges in between each charge. Not a single piece broken yet! Cross finger's...
Grass is a friend of helis and Merv
-Then after clean time, i decided it was time to get rid of this little wires...
-That's the way i like it! Big and fat :P
Let's see on the next "massacre" if she pass the test! I have a feeling that i will see a little omph... on other's rc's that's what big fat cables and capacitors do! :P
Some flames will not be cool! Or maybe yes... a good excuse for better batery's, ESC :P
#14
Tech Elite
Thread Starter
Well, today was not a good day to try the fat batery cables...
I liked the scream they make on the motor but concrete walls don't like my merv!
-The chassis opened a little more from last time and the bulkhead to, on one side.... End of fun.... (
So i stoped playing, had go home... and start some magic!
-After a Rc tire CA glue session on the chassis.... i applyed fiber glass!
-No money spent fixing it! I know it's not pretty but it works! I test run it and see no complaints....
Hope she last's the same time has the other time! Me happy now! Let's play!
I liked the scream they make on the motor but concrete walls don't like my merv!
-The chassis opened a little more from last time and the bulkhead to, on one side.... End of fun.... (
So i stoped playing, had go home... and start some magic!
-After a Rc tire CA glue session on the chassis.... i applyed fiber glass!
-No money spent fixing it! I know it's not pretty but it works! I test run it and see no complaints....
Hope she last's the same time has the other time! Me happy now! Let's play!
Last edited by targetingxmod; 12-29-2013 at 01:25 PM.
#15
Tech Elite
Thread Starter
It runs fine as the video shows...
After that video and another pack...i have the "crack" sound on the rear diff...
So open it!
(my bulkheads do not have the securing screws..."old version", grrrrr!)
-I found this.... hum... really? A stone in there? Nah, maybe got in there when i dismantled it! But when i saw it first time i smiled....
-This were completly dry...
-I puted 2 shims on the pinion gear... don't know if right but it's done...
-Made a shim that i got laying around...
And now let's see.... it makes noises by hand moving the car... don't know!!
EDIT (after a pack the noises went away).
ALL good! Let's play
For now! lol
+ YouTube Video | |
After that video and another pack...i have the "crack" sound on the rear diff...
So open it!
(my bulkheads do not have the securing screws..."old version", grrrrr!)
-I found this.... hum... really? A stone in there? Nah, maybe got in there when i dismantled it! But when i saw it first time i smiled....
-This were completly dry...
-I puted 2 shims on the pinion gear... don't know if right but it's done...
-Made a shim that i got laying around...
And now let's see.... it makes noises by hand moving the car... don't know!!
EDIT (after a pack the noises went away).
ALL good! Let's play
For now! lol