NEW MINI 8IGHT BUGGY FROM LOSI !
#9751
Tech Adept
sounds like a receiver issue....
#9752
So its the receiver that's not top end? Upgrade it first?
#9753
Tech Adept
well i wouldnt say its mot top end but there might be a issue with it...seen some weird things happen, i had a rx that got sand in it, there was a small filing of metal and it shorted out....
#9754
I guess I will find out once I remove it, but what is the factory spur teeth count? I just bought the losi 3 pack and plan on gearing UP.
#9755
Tech Adept
think its a 58T spur gear bud, with 3s you usually gear down not up unless you planning speed runs
#9756
Tech Master
iTrader: (143)
Got a brand new RTR Body and tires up for grabs if anyone want spares. $30.00 clams shipped.
http://www.rctech.net/forum/r-c-item...ody-tires.html
http://www.rctech.net/forum/r-c-item...ody-tires.html
#9757
I meant 3 pack as in the spur 3 pack.
#9758
So my HS 225 servo just went out on me. Is there any new servo replacements that have been proven to work with this mini buggy?
#9759
Tech Adept
depends if you want digital? i went savox as my 225 was faulty out the box...no issue since
#9760
Tech Adept
Wheel options...
Hey all,
What are my options for wheels if I want to use the stock tyres? I hate the yellow of the stock wheels, they are not neon like you'd expect, so I'd like to go white, maybe even black.
Does anyone know if the stock wheels will take a black dye at all?
I've tried the front tyres on 24mm white dish touring car wheels and even those look a little narrow, any suggestions would be gratefully received.
What are my options for wheels if I want to use the stock tyres? I hate the yellow of the stock wheels, they are not neon like you'd expect, so I'd like to go white, maybe even black.
Does anyone know if the stock wheels will take a black dye at all?
I've tried the front tyres on 24mm white dish touring car wheels and even those look a little narrow, any suggestions would be gratefully received.
Last edited by J A M I N; 08-21-2014 at 06:35 AM.
#9761
Thanks
#9762
Tech Adept
Servo's:
SH1250MG savox...which is what i use
Hitec 225mg or HS-5245MG
Corona ds329hv (hobbyking)
thats all i found.
Savers:
The Kimborough work well...all the part numbers are in the link:
http://kimbroughracingproducts.com/s...ategory_id=205
Or this one : DTXC8852
hope that helps
SH1250MG savox...which is what i use
Hitec 225mg or HS-5245MG
Corona ds329hv (hobbyking)
thats all i found.
Savers:
The Kimborough work well...all the part numbers are in the link:
http://kimbroughracingproducts.com/s...ategory_id=205
Or this one : DTXC8852
hope that helps
#9763
ruhh rrohh looks like the losi spur set is 58T+
#9764
Servo's:
SH1250MG savox...which is what i use
Hitec 225mg or HS-5245MG
Corona ds329hv (hobbyking)
thats all i found.
Savers:
The Kimborough work well...all the part numbers are in the link:
http://kimbroughracingproducts.com/s...ategory_id=205
Or this one : DTXC8852
hope that helps
SH1250MG savox...which is what i use
Hitec 225mg or HS-5245MG
Corona ds329hv (hobbyking)
thats all i found.
Savers:
The Kimborough work well...all the part numbers are in the link:
http://kimbroughracingproducts.com/s...ategory_id=205
Or this one : DTXC8852
hope that helps