2008 1/18 Indoor Off Road Nats @ R/C Madness
#31
Hi All,
Just thought I would give you an updated list of all the sponsors... Looking real good and I have a few more yet to confirm!!
Team Associated
R/C Driver
Castle Creations
Xtreme R/C Cars
Duratrax
Team Scream
Apogee Packs
Quark Brushless
Tamiya USA
Competition X
www.AtomicMods.com
Losi
Xcelorin
Grand Concepts
LRP
Thunder Tiger
18thScaleRacing.com
Reedy
SMC
UpGrade RC
Novak
Max Amps
G&F Racing
www.YourMicro.com
New Wave Cells
BRP Racing
Exotek
Pro-Line Racing
Diggity Designs
Spektrum
Spaz Stix
www.thetoyz.com
Psycho Cells
HobbiCo
Badger Airbrush
MRC
Team Helotes
Team Tekin
Drop me an email if you have any questions or if you want to be a sponsor...
Just thought I would give you an updated list of all the sponsors... Looking real good and I have a few more yet to confirm!!
Team Associated
R/C Driver
Castle Creations
Xtreme R/C Cars
Duratrax
Team Scream
Apogee Packs
Quark Brushless
Tamiya USA
Competition X
www.AtomicMods.com
Losi
Xcelorin
Grand Concepts
LRP
Thunder Tiger
18thScaleRacing.com
Reedy
SMC
UpGrade RC
Novak
Max Amps
G&F Racing
www.YourMicro.com
New Wave Cells
BRP Racing
Exotek
Pro-Line Racing
Diggity Designs
Spektrum
Spaz Stix
www.thetoyz.com
Psycho Cells
HobbiCo
Badger Airbrush
MRC
Team Helotes
Team Tekin
Drop me an email if you have any questions or if you want to be a sponsor...
#32
Cleared it with Tower Control and I'm going to the off road nats! You guys put on a great show for the onroad nats and thought I'd give offroad a chance.
I know this is one of your premier events and I know it's going to be great.
Team Canada (Ottawa) will represent. Trying to convince Max to come down. He's got to get his rear end to some races soon!
Most likely Open trucks and Open buggy for me.
Now I need to find out the best foams for open trucks (Xray) and open buggy (exotek). Search is beginning.
Any recommendations for the RCMadness track? Which compound do you use? Is Parma the preferred make? Any suggestions for your track would be appreciated.
I know this is one of your premier events and I know it's going to be great.
Team Canada (Ottawa) will represent. Trying to convince Max to come down. He's got to get his rear end to some races soon!
Most likely Open trucks and Open buggy for me.
Now I need to find out the best foams for open trucks (Xray) and open buggy (exotek). Search is beginning.
Any recommendations for the RCMadness track? Which compound do you use? Is Parma the preferred make? Any suggestions for your track would be appreciated.
#33
will the mini inferno be allowed in the open buggy class?
#34
How about 1/18th scale off road out doors
an word on anyone running the 1/18th scales outside on an outdoor of road track? IO think that would be cool.
#35
#36
Jan 27th 11/18th Scale Carpet Off Road Race of Champoins
What class's will be running in this and can I run my RC18T? And is it open to only some or can anyone come up and race?
#37
#38
Will ask again in case it was missed
Which preferred foams for M18t at RCMadness?
--> I understand ZBarry used dual compound in front and white in back. Is that standard there.
Which preferred foams for rc18t/exotek?
--> Looking for any recommendations?
New to offroad carpet and time is limited to test loads of foams. Any help would be appreciated.
Which preferred foams for M18t at RCMadness?
--> I understand ZBarry used dual compound in front and white in back. Is that standard there.
Which preferred foams for rc18t/exotek?
--> Looking for any recommendations?
New to offroad carpet and time is limited to test loads of foams. Any help would be appreciated.
#39
Tech Master
iTrader: (11)
make note of your tire choices.....
Class 8:
1/18 Buggy Open
Sponsored by ApogeePacks.com
Open 1/18 Chassis
Open Brushed or Brushless motor
1/18 Rubber Buggy Tires. No Touring Car Sized Tires or Foam Tires or Hex Adapters
Must run narrow front tires, (similar to the RC18B or Duratrax Vendetta)
Front tires must be less than 1” wide when mounted on rims (No wide front tires/rims)
No truck front tires/rims.
Open Electronics
Open battery voltage; Li-Po or 2/3A Cells
Must run a buggy body with wing
Class 8:
1/18 Buggy Open
Sponsored by ApogeePacks.com
Open 1/18 Chassis
Open Brushed or Brushless motor
1/18 Rubber Buggy Tires. No Touring Car Sized Tires or Foam Tires or Hex Adapters
Must run narrow front tires, (similar to the RC18B or Duratrax Vendetta)
Front tires must be less than 1” wide when mounted on rims (No wide front tires/rims)
No truck front tires/rims.
Open Electronics
Open battery voltage; Li-Po or 2/3A Cells
Must run a buggy body with wing
#40
thnaks berm, i was aware of rubber tires only, i might have something up my sleeve for this
#41
quick question:
would a vendetta st converted to a buggy with buggy body and buggy tires be acceptable in the open buggy class? The rules state open chassis, but i don't know if that means only open buggy chassis.
thanks
would a vendetta st converted to a buggy with buggy body and buggy tires be acceptable in the open buggy class? The rules state open chassis, but i don't know if that means only open buggy chassis.
thanks
#42
The Detta ST would be too wide. Please see the bottom section of the rules where size is called out.
#43
oh didn't see that...thanks
#44
Tech Champion
iTrader: (15)
Will ask again in case it was missed
Which preferred foams for M18t at RCMadness?
--> I understand ZBarry used dual compound in front and white in back. Is that standard there.
Which preferred foams for rc18t/exotek?
--> Looking for any recommendations?
New to offroad carpet and time is limited to test loads of foams. Any help would be appreciated.
Which preferred foams for M18t at RCMadness?
--> I understand ZBarry used dual compound in front and white in back. Is that standard there.
Which preferred foams for rc18t/exotek?
--> Looking for any recommendations?
New to offroad carpet and time is limited to test loads of foams. Any help would be appreciated.
The AE guys were using the standard AE RC18T foam truck tires but just cut down. They were dialed.
#45
Thanks Mike.