Project: SwitchBlade Xmod
12-05-2007, 12:42 PM
#1
Project: SwitchBlade Xmod
Since my XMOD has just been collecting dust whilest I've had the M18B, I have decided to take it all apart, clean it and make some big changes.
First of all, the old servo was broken (I think the gears were stripped) and I recently broke the antennai wire. I have a Specrum Micro reciever already, and its a great size and is light enough for the car. I plan to use it along with a Hitec Micro Servo (the really really small one). I already have an Atomic T2 motor and V2 board, but since I want to use a different reciever and servo, I might have to buy a 1/36 Brushless system from Losi.
Here are some photos:
Hope you like it, expect some progress soon.
First of all, the old servo was broken (I think the gears were stripped) and I recently broke the antennai wire. I have a Specrum Micro reciever already, and its a great size and is light enough for the car. I plan to use it along with a Hitec Micro Servo (the really really small one). I already have an Atomic T2 motor and V2 board, but since I want to use a different reciever and servo, I might have to buy a 1/36 Brushless system from Losi.
Here are some photos:
Hope you like it, expect some progress soon.
Last edited by Hide; 12-05-2007 at 12:44 PM. Reason: photo tags
12-13-2007, 08:15 PM
#3
XMODS RULE!!!!!!
Ive got 4 of them! A Lancer, Corvette, Camaro, and Hummer H2!
Also www.xmodsource.com is a AWESOME place to talk XMODS! You can buy, sell, talk XMODS all day long!!! Iam hrnts69 on there also!!!
By the way, SWEET CHASSIS!!!!!!!
I wish i had a chassis like that for my Gen. 1 car!!!
Ive got 4 of them! A Lancer, Corvette, Camaro, and Hummer H2!
Also www.xmodsource.com is a AWESOME place to talk XMODS! You can buy, sell, talk XMODS all day long!!! Iam hrnts69 on there also!!!
By the way, SWEET CHASSIS!!!!!!!
I wish i had a chassis like that for my Gen. 1 car!!!
07-01-2008, 01:38 PM
#6
MAJOR BUMPAGE!
Nearly finished, I am now making a custom mount for the servo and have made a new tie rod. It goes where the front top brace was, and I had to turn the knuckles up side down for it to work. I think I'll remake it though, as this is an old part from an evo, don't know where from but I found it and thought it might work. It gets slightly stuck though ...
Pics soon, I'm going to use a Novak Micro ESC because I can and its small.
Nearly finished, I am now making a custom mount for the servo and have made a new tie rod. It goes where the front top brace was, and I had to turn the knuckles up side down for it to work. I think I'll remake it though, as this is an old part from an evo, don't know where from but I found it and thought it might work. It gets slightly stuck though ...
Pics soon, I'm going to use a Novak Micro ESC because I can and its small.
.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
