R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Micro and Mini Scales (https://www.rctech.net/forum/micro-mini-scales-115/)
-   -   Mini-96 World Challenge (https://www.rctech.net/forum/micro-mini-scales/1041360-mini-96-world-challenge.html)

Traveler2 04-29-2021 05:50 AM

Apr 2021 Stock 90 Narrow
 
Class-90mm Narrow Stock
Date-
Location-Winston-Salem, NC
Race Time-
Fastest Lap-
Chassis-MR-03EVO SP ASF
Body-RX-7
Wheelbase-90mm
Tires-K30 flat fronts, K40 radial rears (19mm 0 offset all around)
Motor-ATM 70T
Batteries-TRP 747s
Front Springs-PN Green
T-Plate-PN SSG #5
Motor Mount-PN MR9094 90mm
Dampener (If applicable)-PN Integrated
Dampener Fluid (If applicable)-None
Gearing-PN 64p 11/51 Ball diff
Notes-No runs this month

Traveler2 04-29-2021 05:51 AM

Apr 2021 Porsche Cup Class
 
Class-Porsche Cup Class
Date-4/27/21
Location-Winston-Salem, NC
Race Time-281.167
Fastest Lap-3.485
Chassis-MR-03 EVO
Body-911 GT3
Wheelbase-90mm
Tires-K30Flat fronts, Marka 10 rears
Motor-ATM 3500
Batteries-Kyosho SpeedHouse 800s
Front Springs-Kyosho Stock
T-Plate-Kyosho FRP 0.6S
Motor Mount-Nexx Round RM
Dampener (If applicable)-PN G10 DDS and Kyosho Inner Tube Shock MZW442
Dampener Fluid (If applicable)-1300 Silicone Oil
Gearing-PN 64p 13/53 Ball diff
Notes-No changes from last month. Only one run late in the month. Less than 1 second faster than last month CW. Challenging but fun to drive.

https://cimg5.ibsrv.net/gimg/www.rct...618237b350.png

https://cimg6.ibsrv.net/gimg/www.rct...893a9467b.jpeg

Traveler2 04-29-2021 05:53 AM

Apr 2021 Stock Class
 
Class-Stock PNR 3500kv
Date-4/25/2021
Location-Winston-Salem, NC
Race Time-259.014
Fastest Lap-3.233
Chassis-PNR2.5W
Body-Ferrari 458 Italia
Wheelbase-98mm
Tires-K30 slick fronts, Marka V1R10 rears
Motor-Rocket 3500vk
Batteries-Kyosho 800
Front Springs-PN Green
T-Plate-PN Carbon #6
Motor Mount-PN 98mm v5
Dampener (If applicable)-PN DDS
Dampener Fluid (If applicable)-None
Gearing-PN 64p 14/53 Ball diff
Notes-Car is very stable and easy to drive, but with the brushless motor I have difficulty recovering from a mistake and it costs me a lot of time. I changed the board from the VE Pro to the EVO board this month, and the response time seems better, but it may have been the ICS settings I used on the new board. Car is finally faster than my PN 70T car below, but only by 4/10 of a second in total time. Still prefer the feel of a brushed motor, but think I'm getting better with brushless...

https://cimg2.ibsrv.net/gimg/www.rct...806910eb8c.png

https://cimg6.ibsrv.net/gimg/www.rct...221eaf4b6.jpeg


Class-Stock GT 70T
Date-4/7/2021
Location-Winston-Salem, NC
Race Time-259.430
Fastest Lap-3.224
Chassis-MR-03 ASF
Body-Ferrari F-430 GT
Wheelbase-94mm
Tires-K30 radial fronts, Marka V1R10 rears
Motor-PN 70T
Batteries-Kyosho 800
Front Springs-PN Purple
T-Plate-PN CF #5
Motor Mount-PN 94-98mm v2
Dampener (If applicable)-PN DDS
Dampener Fluid (If applicable)-None
Gearing-PN 64p 10/54 Ball diff
Notes-No changes from last month.

https://cimg6.ibsrv.net/gimg/www.rct...7420e4ab06.png

https://cimg7.ibsrv.net/gimg/www.rct...79efb33f0.jpeg

Traveler2 04-29-2021 05:54 AM

Apr 2021 Pro Stock Class
 
Class-Pro Stock GT
Date-4/28/2021
Location-Winston-Salem, NC
Race Time-258.655
Fastest Lap-3.281
Chassis-MR-03 EVO
Body-Ferrari 458 Italia GT2
Wheelbase-98mm
Tires-K30 radial fronts, Marka V1R10 rears
Motor-Kyosho X-Speed (50T)
Batteries-Kyosho SpeedHouse 800
Front Springs-PN Purple
T-Plate-Kyosho CF Medium
Motor Mount-R246-1355 One Piece Motor Mount
Dampener (If applicable)-Kyosho DDS
Dampener Fluid (If applicable)-None
Gearing-Kyosho Ball Diff II with 6t pinion
Notes-No changes from last month. Only got to run this car twice late in the month, so it was only 4/10 of a second faster than my stock brushless car in total time. Interesting how close my stock brushed, stock brushless and pro stock brushed cars in times, 259.4, 259.0 and 258.7 respectively.

https://cimg3.ibsrv.net/gimg/www.rct...400c121798.png

https://cimg9.ibsrv.net/gimg/www.rct...a796a2d1a.jpeg

Medo998 04-29-2021 10:26 PM

Aprile 2021 stock
 
Risultati 2021

Aprile

Aula stock
Date 30/04/2021
Location L’Aquila-Italia
Race Time 266,1
Fastest Lap 3.29
Elettroniche ste
Body Mc p1
Wheelbase 98
Tris 10-20
Motor pn
Batterie 750
anteriore Springs rosse
T-Plate 4
motore Il supporto della
antivibrazioni (se applicabile)
Dampener fluido (se applicabile)
Gearing- sta
Notes-

chemnut220 04-30-2021 12:03 PM

Open AWD

April 2021Class- Open AWD

Date- 27APR2021

Location- Maryland

Race Time- 341.23

Fastest Lap- 4.08

Chassis- Atomic BZ3

Body- VST lexan

Wheelbase- 98mm

Tires- PN Med front, Marka v10 rear both trued to 23.5mm

Motor- Team powers 7000kv

Batteries- LiPo

Front Springs- Blue (red rear)

T-Plate- NA

Motor Mount- NA

Gearing- FDR 6.13
https://cimg7.ibsrv.net/gimg/www.rct...e5b13d3f3e.png

Traveler2 04-30-2021 02:52 PM

^^^That is a lot of horsepower for a Mini96. I’d recommend getting a RWD ReadySet and running it in box stock.

chemnut220 04-30-2021 05:57 PM


Originally Posted by Traveler2 (Post 15782582)
^^^That is a lot of horsepower for a Mini96. I’d recommend getting a RWD ReadySet and running it in box stock.

I have definitely considered it!

I have my throttle epa turned down to 23-28% depending on how awake I am when driving and other factors...

When I get sick of breaking front CVD’s I will probably go for the ready set.

MileHighRC 04-30-2021 11:54 PM

Box Stock
 
Box Stock

Class - Box Stock
Date - 4/17/2021
Location - Mead CO
Race Time - 339.6
Fastest Lap - 3.79
Chassis MR03
Body - Audi R8
Wheelbase - 98mm
Tires - K30 LH Slicks front, K20 radial rear.
Motor - Kyosho Stock silver can
Batteries - Kyosho 800
Front Springs PN Red
T-Plate - PN CF #5
Motor Mount - Stock MM
Dampener - None
Dampener Fluid - None
Gearing - Stock diff & 7 tooth pinion.


https://cimg5.ibsrv.net/gimg/www.rct...83d75866d2.png
https://cimg6.ibsrv.net/gimg/www.rct...732080c11.jpeg


MileHighRC 04-30-2021 11:54 PM

Porsche Cup
 
Porsche Cup

Class - Porsche Cup
Date - 4/17/2021
Location - Mead CO
Race Time - 335.9
Fastest Lap - 3.96
Chassis - MR03
Body - Porsche 911 GT3
Wheelbase - 90mm
Tires - K30 LH Slicks front, K20 radial rear.
Motor - Kyosho stock silver can
Batteries - Kyosho 800
Front Springs PN Red
T-Plate - Kyosho Fiberglass #5
Motor Mount - PN Gear Diff
Dampener - Kyosho RM Disk Damper
Dampener Fluid - None
Gearing - PN 9 tooth pinion.

https://cimg7.ibsrv.net/gimg/www.rct...d75d0adeed.png
https://cimg9.ibsrv.net/gimg/www.rct...7f07edb6a.jpeg

MileHighRC 04-30-2021 11:54 PM

Stock
 
Stock

Class - Stock
Date - 4/17/2021
Location - Mead CO
Race Time - 320.2
Fastest Lap - 3.76
Chassis MR-03 EVO
Body - Audi R8 LMS 2015
Wheelbase - 98mm
Tires - K30 radial worn to slick front, K20 radial rear.
Motor - Kyosho X Speed 4100KV
Batteries - Kyosho 800
Front Springs Kyosho Red
T-Plate - PN CF #4
Motor Mount - PN V4
Dampener - PN Graphite Disk Damper
Dampener Fluid - None
Gearing - PN 64P Ceramic Ball Diff & 9 tooth pinion.

https://cimg0.ibsrv.net/gimg/www.rct...a212f2a949.png
https://cimg1.ibsrv.net/gimg/www.rct...203885766.jpeg

chjosi 05-02-2021 07:46 AM

I was able to get laps in on the April layout, just not with a timer. Excited to get involved this month!

chemnut220 05-02-2021 12:57 PM


Originally Posted by Traveler2 (Post 15782582)
^^^That is a lot of horsepower for a Mini96. I’d recommend getting a RWD ReadySet and running it in box stock.

the biggest problem here is the same problem I had 8 weeks ago when I got into 1/28th. There is nothing in stock anywhere that I know of. It’s why I went Atomic/AWD to begin with.. it was all I could find. It’s why I have a 7000kv motor... it’s all that was in stock...

If so many people are buying these things, why is nobody here racing them?

I was able to find a 20th anniversary mr-03 evo. I would be out about $400 to get it up and running, and would be in pro stock. I’m not sure that is any better situation than I’m in...

Lucky Lou 05-03-2021 11:45 AM

Which motor are you looking for?

chemnut220 05-03-2021 04:06 PM


Originally Posted by Lucky Lou (Post 15783443)
Which motor are you looking for?

At the time I wanted a 5xxx kv motor as I was building this car for larger tracks. They were all sold out - but are in stock now. I don’t mind the 7000 kv motor as I can just turn the rate back on the Tx. I also have a 3200 kv in an AMZ that I will play with this month.


can I put the module in the ready set and use my TX for box stock (NB4) or do I have to use the stock TX?


All times are GMT -7. It is currently 07:20 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.