Go Back  R/C Tech Forums > Members List
Reload this Page >

Lars in Norway's Profile

Lars in Norway Lars in Norway is offline

Tech Fanatic

Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. voo2doo
    08-14-2017 11:57 AM - permalink
    Hi Lars,are you still on this forum?
  2. maherbeemer
  3. maherbeemer
    06-11-2013 05:24 AM - permalink
    Hi Lars; I know its old but I saw your thread where you placed the ford focus shell on the Marder. I have an FG marder with fully elcon upgrade with the wide rear. I know that you extended the chassis. I have a few questions I want to ask I noticed that you were able to fit the mcd speed line wheels I have those but there offset is really low so it hits the steering rods at the front, did you use FG touring steering rods? as for the rear it fits fine. My other question is that I won't be making any extensions on the marder chassis. My stock wheelbase is about 475mm I know the porsche bodies from FG have a wheelbase of 465 which is almost the same and you can work your way around it, but I have know idea as for how the height and width will work, but I am for going for the rally look. I found the FG renault megane body which can work as a rally body. It has a wheelbase of 510.

    any help would be appreciated.
  4. fishnfst
    08-26-2012 07:30 PM - permalink
    Hello Lars I saw a post you had commented on about how to fix the slop in the front end and steering linkage of your kyosho drx.. I purchased a drx ve a couple of weeks ago and have been having issues with the steering re-centering when I let go of the wheel on the remote.. The wheels will always stay slightly towards the way I had turned.. It makes it difficult when exiting corners and very unpredictable.. Do you have any recommendations on how ti improve this?

    Any and all info would be much appreciated..

  5. viking252200
    08-05-2012 06:53 AM - permalink
    Hej Lars,

    You have had your Kyosho DRX for some time now...before I get the drx ve version, I just wanted to hear your opinion.
    Do you like it?
    Any problems I should be aware of?

    Tak for hjælpen
  6. Umesh Gohil
    07-19-2012 02:10 PM - permalink
    Not talking to me anymore!!
  7. Umesh Gohil
    07-05-2012 08:17 AM - permalink
    Hi Lars

    If you had to choose between 1/5 Yankee Porsche and 1/5 FG which one would you go for any why. I just want a comparsion
    Thank you
  8. rcindia
    02-12-2012 09:14 PM - permalink
    Hi Lars, I like your rc8 conversion. What are the parts required to convert? I understand your body is from Delta plastik. What about shock tower, body posts and bumpers? Did you try any bodies from Kyosho or other companies?
  9. Lars in Norway
    02-12-2012 05:20 AM - permalink
    I have used the Seat Cordoba WRC from Delta Plastik.
  10. DeaDShorT
    01-22-2012 10:22 AM - permalink
    Hello, was wondering what body you used on the rc8e rally conversion??


About Me

  • About Lars in Norway
    Norheimsund, Norway
    RC of course:)
  • Signature
    Read more about my homeplace in New York Times (LOL)


Total Posts
Visitor Messages
General Information
  • Last Activity: 11-02-2015 04:38 PM
  • Join Date: 09-27-2010
  • Referrals: 0


Showing Friends 1 to 1 of 1

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service