Try 6.0 if your using stock 5.5 in the front, im using 5.75 in front and may go to softest at rear 6.5

Hi,

I got the car on the track today. You are right, I need softer rear springs, I loose the rear on the exits of the slow corners.

I probably wouldn't have bothered with the swaybars for 540, i ran without them with 10.5 brushless and only installed them after i boosted the esc, front toe out increases initial turnin but decreases corner exit so helps a car that is loose on power, if your loose off power then try 0 toe

Why do you toe out the front when you have natural oversteer? Doesn't increasing toe out reduce car stability?

Hi thefan,

Thanks for your kind advice.
Prior to reading your post, I ordered (as well as misc tool/oils)

1 x 3Racing (#3RAC-WX124/PK) Wheel Adaptor (4mm) for Sakura Zero - Thick
1 x MUCH MORE (#RS-PMA36X) Rush 36X 1:10 Touring wheel Pre-Mount Tire 36deg (4 Tires w/Wheel & Inserts)
1 x MUCH MORE (#MMS-30) 100% Silicone Shock Oil #300
3 x *Yeah Racing (#MG-48023) Aluminum 7075 Hard Coated Motor Gear/Pinions 48 Pitch 23 Teeth
1 x MUCH MORE (#MMS-35) 100% Silicone Shock Oil #350
2 x Kawada (#S48-74T) Super Tough Spur Gear 48P - 74T
1 x 3Racing (#SAK-47) Rear Stabilizer Set For 3racing Sakura Zero
1 x 3Racing (#SAK-46) Front Stabilizer Set For 3racing Sakura Zero
1 x 3Racing (#SAK-10) Steering System For Sakura Zero

So the the turnbuckles, transmission pulleys and springs would be the next thing I try but I really need to get the car built and get laps in before I drop more dough.