RC SCALE TANKS corner
#1
RC SCALE TANKS corner
future plans:
- extend detailed accs.
- add more lights
- add 2-3 channels for scale purposes
- replace the stock TX to a more channel TX
- extend detailed accs.
- add more lights
- add 2-3 channels for scale purposes
- replace the stock TX to a more channel TX
Last edited by sLith; 04-14-2011 at 10:48 PM.
#2
1/16th scale Heng Long brand, worth the playtime
#4
tank
@Sir dongskie - nice tank sir.. any modification you made there?
@etivac13 - nabili ko po yung tank ko sa divisoria mall 168 dun po yung mga henglong brands much cheaper than tamiya but same detailed din ung akin po 1/16 henglong snow leopard with sounds, lights and firing pellet....soooper enjoy sia talaga
@etivac13 - nabili ko po yung tank ko sa divisoria mall 168 dun po yung mga henglong brands much cheaper than tamiya but same detailed din ung akin po 1/16 henglong snow leopard with sounds, lights and firing pellet....soooper enjoy sia talaga
#5
Here are a few mods I did:
METAL SPROCKETS
RX18 UNIT
GRAUPNER SPEED 700 MOTOR
HIGHER RATIO GEARING FOR ULTRA CRAWL SPEED
MODIFIED THE INTERIOR FOR A MORE ERGONOMIC LAY OUT
BIGGER SPEAKER
METAL SUSPENSION ARMS
HERE IS MY PANZER III AUSF/1
METAL SPROCKETS
RX18 UNIT
GRAUPNER SPEED 700 MOTOR
HIGHER RATIO GEARING FOR ULTRA CRAWL SPEED
MODIFIED THE INTERIOR FOR A MORE ERGONOMIC LAY OUT
BIGGER SPEAKER
METAL SUSPENSION ARMS
HERE IS MY PANZER III AUSF/1
#6
ds
@dongskie - sir ilang volts ung pinalit nyo pong large speaker? how about the replacement of reciver? any ideas? im planning to use my futaba atack 4wd with custom 2channel add-ons and a 8ch rx
if im not mistaken the stock ratio of a 1/16 tanks by henglong is 1:147 so what is your final ratio now after the those mods sir?
if im not mistaken the stock ratio of a 1/16 tanks by henglong is 1:147 so what is your final ratio now after the those mods sir?
#7
@dongskie - sir ilang volts ung pinalit nyo pong large speaker? how about the replacement of reciver? any ideas? im planning to use my futaba atack 4wd with custom 2channel add-ons and a 8ch rx
if im not mistaken the stock ratio of a 1/16 tanks by henglong is 1:147 so what is your final ratio now after the those mods sir?
if im not mistaken the stock ratio of a 1/16 tanks by henglong is 1:147 so what is your final ratio now after the those mods sir?
Im not exactly sure sa ratio, but mine is definitely higher na.. ang laki ng difference sa stock gearing, mas may crawl na talaga..
Btw here was my M-26 Pershing, removed the side skirts.
Last edited by Dongskie; 02-23-2011 at 02:38 AM.
#8
sa
thanks a lot sir i will definitely do the same...where did you get those gears?
#9
#10
sa
nice idea...
#12
Biglang tigil itong thread na ito ah hehehehe
#13
WANTED
nabuking yung mga wanted,dito pala nagpopost,ingat baka may mabiktima.....
#14
1/35 armor rc conversions
at last!! a thread for rc tanks here's my rc conversion of the 1/35 scale tamiya brand walker bulldog tank
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
#15
@Hinirang: video naman diyan ng expert conversion mo