Hello po mga sirs, newbie at this forum po, need ko po sana ng help, I'm looking for a certain Item, I know it's phased out and production has been ceased, nagbabakasakali lang po ako baka mayron po sainyo meron o nakakaalam kung san po makakabili.

TOMY Bit char-G Pullback Skyline GT-R R34 blue GP01
Attachment 554677
*Note: this is pullback only, not rc set. But used for body replacement on BitChar G units.

I had this before, it was stolen amongst my collection, it really means a lot to me since it's one of my fave models.

If you have any information where it might still be available, hopefully within Manila, please let me know.

Or if you're selling this exact item please inform me,...
ym me with your cp number and your location; [email protected]

thank you in advance to those that will respond.

L/F: Futaba FP-R114H Receiver
 

L/F: Futaba FP-R114H , AM, 72Mhz, Ch56 (72.910Mhz). 4-ch receiver for Futaba FP-T4NBL Attack 4 radio

Also,

F/S TURNIGY Accucel 6 Charger / Balancer (bnew)
1) Can charge LiPo(6-cells),NiMh(12 cells),NiCd(12 cells) and Lead Acid(12V) batteries
2) Comes with power supply lead wires, outut lead wires with alligator clip, lead out connector for igniter and receiver batteries
3) Can charge / balance and cycle
4) with settings memory function (up to 5 saved data)
5) requires 11-18Vdc,5A power supply (not included)


contact: (0917)596-3644

rc stuff for sale
 

NEW 1150 ball bearings (upgrade for plastic bushings of TT01, TL01, TB02, etc) - P70/pc (minimum purchase of 20pcs FREE Ship na)
http://i221.photobucket.com/albums/d...y/IMG_1457.jpg

NEW 1050 ball bearings (for M-03, M-04, M-05 uprights) - P 40/pc (minimum purchase of 20pcs FREE Ship na)
http://i221.photobucket.com/albums/d...y/IMG_1458.jpg

UNUSED Tamiya Aluminum Rear Upright 1.5 Degree for M-03, M-04, M-05 (w/ 4 pieces of 1050 ball bearings) - P 700 (free shipping) - SOLD
http://i221.photobucket.com/albums/d...tled-1copy.jpg

NEW iMAX B6 Digital Lipo NiMh Battery Balance Charger (w/ 12V 5A Power Adapter) - P 3,200 (free shipping) - SOLD
http://i221.photobucket.com/albums/d...y/IMG_1420.jpg

NEW WinForce 11.1v 2200mAh 20C 3-Cells Li-Po Battery (for heli / airsoft) - P 1,300 (free shipping)
http://i221.photobucket.com/albums/d...y/IMG_1416.jpg

NEW Mystery 5000mAh 7.4v 30C 2s Li-Po Battery (Car / Boat) 256g Only - P 2,600 (free shipping) - SOLD
http://i221.photobucket.com/albums/d...y/IMG_1423.jpg

UNUSED Tamiya Super Driftech Tires (4pcs.) - P 700 (free shipping)
http://i221.photobucket.com/albums/d...y/IMG_1421.jpg

NEW Super Power 7.2v 3800mAh Ni-MH Battery - P 1,200 (free shipping)
NEW Super Power 7.2v 5000mAh Ni-MH Battery - P 1,800 (free shipping) - SOLD..
http://i221.photobucket.com/albums/d...y/IMG_1424.jpg

USED Duratrax Intellipeak Ni-MH/Ni-CAD Charger (110v) - P 1,800 (free shipping)
http://i221.photobucket.com/albums/d...s/102_1569.jpg

UNUSED Tamiya TRU-02 2-channel AM Receiver - P 900 (free shipping) - SOLD 1PC. / STILL AVAILABLE
http://i221.photobucket.com/albums/d...y/IMG_1426.jpg

NEW Tamiya Tx/Rx AM 27mhz crystal set - P 350 (free shipping)
(pls check pic for avail frequencies)
http://i221.photobucket.com/albums/d...y/IMG_1454.jpg

UNUSED Tamiya TEU-104BK ESC (w/ lipo cut-off) - P 1,000 (free shipping) - SOLD 1PC. / STILL AVAILABLE
http://i221.photobucket.com/albums/d...y/IMG_1429.jpg

UNUSED Tamiya TLU-01 Light Unit - P 900 (free shipping)
http://i221.photobucket.com/albums/d...y/IMG_1431.jpg

NEW Team Vertex VTX-ST1 RTR 1/8 scale truggy - P19,000 (free shipping)
- CLICK this to see it in action: YouTube - Team VTX-ST1
- for parts availability, pls check their website: http://www.teamvtx.com
- note: HINDI PA NA-BREAK-IN
- front pivot ball suspension / extended chassis / captured arm mounts
- front universal drive shafts / sealed bevel gear diffs
- big bore racing shocks / complete ball bearings
- vertex 0.26 drill start engine / 49t steel spur gear
- low CG radio tray / fully adjustable suspension
- 3 shoe aluminum clutch / 150cc fuel tank with filter
- hi-torque steering servo / spiral cut steel conical gears
- heavy duty suspension arms / complete w/ drill starter & nitro kit
- http://i221.photobucket.com/albums/d...s/100_1549.jpg
- http://i221.photobucket.com/albums/d...s/100_1552.jpg
- http://i221.photobucket.com/albums/d...s/100_1555.jpg
- http://i221.photobucket.com/albums/d...s/100_1553.jpg
- http://i221.photobucket.com/albums/d...s/100_1554.jpg
- http://i221.photobucket.com/albums/d...s/100_1559.jpg
- http://i221.photobucket.com/albums/d...s/100_1560.jpg

NEW E-Flite Blade 400 - P 10,700 (free shipping)
- completely factory assembled airframe
- capable of sport flying & 3d aerobatic right out of the box
- factory installed DS75 digital submicro servo & G110 micro headlock gyro offers precise and powerful control
- included 420H brushless motor & 25a brushless ESC deliver incredible power & performance
- Ccpm control w/ push-pull elevator & direct-to-swash aileron/pitch linkages
- plug & play - add your favorite TX & RX to be ready for hovering & 3d aerobatics.
http://i221.photobucket.com/albums/d...s/102_1571.jpg

ALL ITEMS ARE IN CEBU:

Warren Noval - catch my drift (rctech) / cebudrifter (prcd)
cell nos.: 0923-3876500 / 0917-3204740

Hirobo Shuttle
 

For sale Hirobo Shuttle ZXX 25,000.00
with OS32 Engine, newly installed S9254 servo for tail with KDS 800 Gyro, Nes-511 servos for cyclic. Comes with Imax 9X 72 Mhz transmitter with battery and charger. just have 6 hover flight not more than 4 feet high. starting plang magpalipad at mostly simulator ako. (pictures are not updated kc kinabit ko na kabibiling S9254 tail servo at KDS800 gyro)

Plus with the following items:
Heli Top Starter Motor with starter shaft
Glow plug igniter with charger
TX and RX charger
hand crank fuel pump
almost new G400 Gyro
spare metal tail assembly comes with blade and tail pitch
spare mast complete with main blade grip and metal mixing arms and swash plate
spare main gear with aluminum autorotation assembly
spare clutch liner with starter shaft and coupling
new horizontal stabilizer
tail servo mounting with rudder control rod
spare wooden main blade
RX volt meter indicator
spare tail belt
heli manual and TX manual
Imax 9X transmitter USB connector for simulator
RealFlight 4G simulator Installer


call or text 09175616442
or SWAP to any high end Cell Phone,
MOUNTAIN BIKE or any gadget. just text me your offer maybe interested.

Read more: http://www.sulit.com.ph/index.php/vi...#ixzz0fSrDQ9wy

FOR SALE (some price lowered)
 

Kyosho Optima wide rims for 1/10th scale Off Road buggy.. set of four.. bnew but slight yellowing.. can be fiited to any hub with hex adaptor.. can also be fitted in some tamiya 1/10th Off Road like Avante, Hot Shot and the likes.. 250pesos
http://i299.photobucket.com/albums/m...h_DSC00571.jpg http://i299.photobucket.com/albums/m...h_DSC00572.jpg

TAMIYA Adspec Transmitter Radio.. First version pistol type, missing battery case, in good working condition.. reciever not included.. AM 1000pesos

HOTBODIES Cyclone D4 parts (sold as package) 300pesos
61422 Front Suspension Arm Set
61442 Rear Shock Tower Graphite
61426 Front Hub Carrier
61425 Rear Hub Carrier
http://i299.photobucket.com/albums/m...h_Image693.jpg

HPI R40 parts (sold as package) 300pesos
75005 Mid Brace 2mm/purple
87084 2Speed Lock Nut
72445 R40 Differential Shaft 6x25mm (gear diff/2pcs)
72444 Brake disc Rotor (stainless steel)
http://i299.photobucket.com/albums/m...ruz/th_r40.jpg http://i299.photobucket.com/albums/m...h_DSC00819.jpg http://i299.photobucket.com/albums/m...h_DSC00820.jpg http://i299.photobucket.com/albums/m...h_DSC00828.jpg

HPI Assorted Parts for RS4/Pro4 300pesos
A187 Threaded Shaft 4-40x24mm (4pcs)
Z136 Ball End 4-40 (4pcs)
75121 Pro4 Pivot Ball 3x5mm (4pcs)
A318 Rod End 5.8x18mm (8pcs)
A316 Rod End 5.8x12mm (8pcs)
BO36 Thrust Bearing 4x9x4mm
93510 Turnbuckle M4x20mm
http://i299.photobucket.com/albums/m...h_DSC00821.jpg http://i299.photobucket.com/albums/m...h_DSC00822.jpg http://i299.photobucket.com/albums/m...h_DSC00823.jpg http://i299.photobucket.com/albums/m...h_DSC00824.jpg http://i299.photobucket.com/albums/m...h_DSC00825.jpg http://i299.photobucket.com/albums/m...h_DSC00826.jpg

HPI R40 Stock Chassis aluminum (purple bnew)
HPI R40 Upgraded/Lightweight/Thick Aluminum Chassis (Silver/bnew) both for 600pesos
http://i299.photobucket.com/albums/m...DSC00545-1.jpg http://i299.photobucket.com/albums/m...DSC00547-1.jpg

Tamiya Aluminum Heatsink for 540type motor silver, used but not abuse 200pesos
http://i299.photobucket.com/albums/m...h_DSC00564.jpg http://i299.photobucket.com/albums/m...h_DSC00566.jpg

KYOSHO Super10 Chrome Mesh Rims for Front/Narrow (pair) bnew 300pesos
http://i299.photobucket.com/albums/m...h_Image041.jpg

Hirobo Tail Blades (white plastic OEM) bnew 200pesos
http://i299.photobucket.com/albums/m...h_Image119.jpg

Master Airscrew Nylon Propeller 6x11 150each
http://i299.photobucket.com/albums/mm296/iancruz/ms.jpg

Hirobo Glow Plug Extension for Shuttle ZX/ZXX, Genuine Hirobo/slightly used 250 pesos
http://i299.photobucket.com/albums/m...h_DSC00567.jpg http://i299.photobucket.com/albums/m...h_DSC00568.jpg

KYOSHO Cessna 182 Skylane at KYOSHO Trainer 40 18K for the package
Both Ready to Fly na.. both kit individually equipped with 3003 servos, Futaba Reciever, O.S. 40FX Engine, Proppeller, with battery reciever at voltage indicator.. and they do share one radio.. yes isang "RADIO" lang for both plane and it is a Futaba SkySport.. yung trainer were flewn in Sta. Rosa Laguna siguro for 10hrs while yung cessna ay hindi pa napalipad both in good condition and no defects whatever.. SOLD AS SET LANG PO.. DI PUWEDE BREAK YUNG PACKAGE... sold as SET.. as "SET" huwag makulet.. makulet papaluin sa puwet...
http://i299.photobucket.com/albums/m...h_Image129.jpg http://i299.photobucket.com/albums/m...h_Image125.jpg http://i299.photobucket.com/albums/m...h_Image128.jpg http://i299.photobucket.com/albums/m...h_Image126.jpg http://i299.photobucket.com/albums/m...h_Image124.jpg









No Reservations.. Priority to those who can get the items first.... Please indicate your rctech handle when texting para di nakakalito at maiwasan ang bogus, no name no reply.. no chikka text din.. lowered na yung price at last price na po.. sobrang baba na at bentang palugi na kaya please.. minimum po sana ng 500pesos worth for meet ups near Manila/Binondo/Caloocan/C-3 Road/5th Ave at R.Papa station area para po di lugi sa pamasahe.. or you can pick up the items near R.Papa station LRT line 1, puwede din po thru LBC but sagot niyo shipping.. also payable thru BPI savings account.. Thanks po and God bless

09238817827

LOOKING
 

LOOKING...


MICRO RECEIVER 27MHZ AM.......KAHIT WALANG CRYSTAL

0919-229-01-18

Used servos for sale
 

http://img30.imageshack.us/img30/7301/dsc07149o.th.jpg
Click for larger view

- Used servos for sale
- Pulled out from sold aircraft
- Good working condition/no defects

Futaba S3001 5 pcs.
Spektrum Digital DS821 1 pc.

- P300 each. Pick-up only.
- SM North-EDSA area.
- PM for inquiries/appointment

HYPER 1/7 Touring RC
 

Selling Brand New HYPER 1/7 Scale Touring RC
-Box and Manual
-.26 HOT Bodies Engine just broken-in with Roto-start back plate
-2 speed transmission with 3 piece aluminum clutch
-2 bodyshells Porsche 911 and Ferrari 360 Modena
-2 sets of wheels and tires
-equipped with anti roll bars and threaded shocks
-high torque steering servo and standard throttle servo
-twin pipe exhaust

everything for 20,000 pesos
If interested please call me or text me at 0927-996-9175 Alexander thanks

Update:
 

Traxxas Stampede XL-5 1/10 Scale

RTR!! 10k Only SOLD!!!:tire:

3 Weeks Old. Some scratches but still looks like new.
With Box, and Manual.

XL-5™ FWD/REV ESC

• Input Voltage: 4.8 to 9.6 volts can be 2s lipo
• Three drive profiles 100% forward and backward,50% power for begginers, reverse lock out for racing!!
• Forward / Reverse / Brake
• EZ-Set® push-button setup
• Thermal shutdown protection
* The Titan 12T is a 12-turn 550 size fan-cooled modified motor.

All you need is a 7.2v Battery and 8pcs AA Batt. then you're good to go.

RFS: Upgrade Unit

-------------------------------------------------------------------------

Looking for:

1. 40t Spur Gear (for T-Maxx)
2. 14t Clutch Bell (for T-Maxx)
3. Brake Pads (for Savage)


Call or Text Me @ 09164921093

LAST POSTED ON PAGE 996
 

last posted on page 996skipped more than the minimum 2 PAGES!!! )


http://www.rctech.net/forum/%3Ca%20h...%22%3E%3C/a%3E

3Racing Alum. Knuckle Arm for Tamiya CR01 crawler B/new 1.2K set (2sets available) (Open For Swap)


TURNIGY BRUSHLESS MOTOR 2435 4,400KV - Bnew 1.5K only (Open For Swap)
Motor Size: 2435 (370S), Speed: 4400kv, ESC Required: 18A-30A, Voltage Range: 6~12v, No Load Curr: 1.2A, Max Load: 26A, Diameter: 24.2mm, Length: 37mm, Front Mounting Hole Distance: 16mm, Front Mount Thread Size: M3, Shaft Diameter:2mm, Shaft Length: 12mm, Weight: 72grams



KEDA BRUSHLESS (540size)MOTOR 5,900KV Bnew 3.5K only (Open For Swap)
Dimensions: 36~50mm
Front mount holes are 25mm apart.
Shaft size: 5mm
Weight: 220g
Turns: 6

Spec.
Kv: 5900rpm/V
Idle Current: 6.9A
Resistance: .0034
Max Amp: 108A



Mtroniks Viper ECO20- 2,000 each, (5 Pcs. Available)
B/New, 20Turn motor limit, built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers), Dual core microprocessor, 4-8 cells input voltage , 4 Layer super power circuit board, Thermal integrated protection system , Digital one touch setup, Legendary 100% waterproof design, Dimensions : L39.0mm x W34.0mm x H13.0mm, Weight : 55g

IP6 Competition ESC- 7,300 (last piece)
B/N, Waterproof, NO MOTOR LIMIT, Rated Current Fwd. 660A- brake. 240A, peak Current Fwd. 2,640A- Brake 960A,Fully programmable punch, drive freq. 4-7 cells NiMh, BEC 5.6V/8.0Amps. Perfect for speed & power junkies!:D

Mtroniks ZGM (Zero Glitch Module)- 1,400 each
B/N, 100% waterproof, dimensions: L28mm x W14mm x D7mm

Mtroniks Signal Booster-1,400 each
B/N, the signal booster has been designed to improve the signal received from the channel it is connected in series with. The signal booster conditions the signal, filtering out any nonsense noise and amplifies the remaining data leaving a strong clean signal, giving crystal clear operation! This unit is also 100% waterproof!

HOBBY WING PROGRAM CARD - 850 pesos each
Pocket Size! Set-up your BL ESC anytime, anywhere! No need to bring your laptops!

DEANS ( T- Connectors)- 200 Pesos/Pack
(3 males, 3 females, with Shrink tubes/ pack)

BULLET Connectors 3.5mm- 200 Pesos/Pack
(3 males, 3 females, 6 Shrink tubes)

EC3 Connectors- 100 Pesos/Pair
Pack contains 2 female & 2 male 3.5mm bullet connectors, 1 male & 1 female plastic casings (blue)





PLEASE CLICK HERE TO SEE COMPLETE PRODUCT INFO & PICS!


I accept payments via Bank Transfers ( BPI & Chinabank), SMART Money/Padala or Credit cards via http://i304.photobucket.com/albums/n...logoedited.jpg

Text or Call Stephen 0919-8888865 or 0932-6783188 Pls. include your real name and RCTech username. Sorry No Trade unless specified! Meet up during Saturdays 7am-12noon at Kidney Center along East Ave. or Q.C. Track . Sundays 10am-12noon SM Megamall. Thanks to RCTech.net and Moderators

FOR SALE SAVAGE XSS WITH K4.6 ENGINE(.28 PULL START) BNEW PROLINE F650 BODY, BNEW WHEELS 17MM HEX, FRONT N REAR UNIVERSAL DRIVE SHAFT, ALUM 17MM HEX, STEERING METAL GEAR SERVO, STANDARD THROTLE SERVO, BOX N MANUAL.. 17K ARTR NEED TX, RX REPRICED 11K RUSH!!!! BENTANG ADIK

FOR SALE ORIGINAL SC10 BODY, SLIGHTLY USED, VERY GOOD CONDITION.. 1.8K


FOR SALE EMAXX2 ROLLING KIT, NO ELECTRONICS.. 10K REPRICED 8k RUSH!!!!!!


NO TRADE, NO PM, NO LAST PRICE, SURE BUYER ONLY

PICK UP SM FAIRVIEW

for sale items.
 

tamiya tt01d rolling chassis.(electronics not included) with ball differential, wheels and tires, for 3000 pesos

d1-L Charger with display. with alligator clip for car battery charging. can charge nicd/nimh batteries. 1250 pesos.

contact me at 09277943251.items are negotiable

still looking:

pasensya na mga bro sa every page post ko:blush:
need ko lang kasi makahanap nito kasi kinukulit din ako ng anak ko:lol:

baka meron kayo kahit used na, sana medyo mura lang kasi bata lang gagamit practice flight lang :D

mods paki-delete na lang
will try to look elsewhere na lang. thanks

selling walkera CB180D 4 channel gud as bnew
complete with box and extra main blade

Hiller stabilizer bar - Stable Flight! Easy to Control!
Aluminum CNC Parts - Durable and Precise, important for any players
Tail Motor + Shaft Driven Tail Rotor - Minimize energy lost
Overall Length - 460mm
Main Rotor Diameter - 440mm
All-up Weight - 288g (Battery included)
Good Looking Canopy - Makes you "Feel" like and Expert!
LCD display TX

http://www.helipal.com/walkera-hm-cb...l-edition.html

youtube video
http://www.youtube.com/watch?v=iAt4G4rEtE8


RFS: shift to nitro offroad rc
Php: 5500

interested buyers can pm me here