R1- Gen2, Machine built R1 Drift tires
 

PHP 200 per set(4pcs)

R1 Generation 2 Drift tires has smaller inside diameter than the previous R1 tires. Machine made tires has rounded outside edges for easy slide on rough tracks/surfaces and slightly trimmed inside edges for easier installation of rims.

This is basically patterned from the most common original drift tires made HPI. Performance almost equally the same. Grip and slip are balance than of other prefab drift tires. If you're tired on slow drift offered by your drift tires, want to add speed on your drift that surely fits your budget, R1 Gen2 is the answer!

Pick up is every 1pm until 6pm on Saturdays at Park Square 1 Roof top.
Place your orders now. Get your R1 Gen2 while supply lasts... Limited stocks only! PM or contact me 09184944961/09227278786

For reviews please refer to:
http://www.philippinercdrifters.org/...t=0#entry16159

http://i85.photobucket.com/albums/k6...tonio/R1g2.jpg

rc
 

For sale:

Hyper st truggy with .28 go engine and ko propo high speed high torque servo and the kit is already converted into pro kit and extra 2 sets of tires
20t-SOLD
Hyper 8 pro buggy .21 go engine and ko propo high speed high torque servo
extra 2 sets of tires 15t-SOLD

M11 with 1pcs. module spektrum and 1pcs. standard reciever spektrum and 1 pcs. pro reciever spektrum 15t fix-SOLD

nova .21 5 port with os tune pipe good condition 6t lowered to 5t nalang Reserve

igniter and charger 2pcs.available 3hundred each nalang-SOLD

temp gun bought it sa dogbone 1t only-SOLD

Please text me @ 0917-866-16-52 globe smart 09209130491

decals for 10th scale
 

D1 style decal logos ( waterslide / FOR 1:10th SCALE)
A4 size for P150

for best result:
-apply the decals inside the body before painting.
-best in white, silver, yellow or any light color bodies.
-hindi visible sa dark color na bodies!

09109665398

(wala po munang customization:sweat:)

n very good cond. tekin TSC G-12c esc no motor limit with box and manual
3k neg

Futaba MJ with tamiya reciever w/ fail safe, 2 servos in mint cond.
2.5k sold

bnew yokomo zr01 drift tires with ring
1.2k neg

bnew yokomo drift master rims
700 SOLD

hpi pro4 with bmw m3gt body (not bashed), hpi work miester rims with ABS tires,1 s3003 servo, upper and lower deck cbf, cbf center shaft, purple aluminum heat sink, cbf shock towers, threaded shocks, alum hex wheel hub, alum c-hub, with lots of spares,with 1 gp 3700 batt for bashing
7k neg
SOLD


Digital Apex infinity charger (nimh-nicd) 100-infinty mah 3amps dis. 6amp cha.
with power supply box and manual
3k

Features:

* Advanced peak detector automatic cut-off circuit with MOSFET and linear current charges battery to 100% without overcharging.
* Selectable 0DV and -DV cutoff technology for NICAD and NIMH battery respectively.
8-bit 12MHz CPU with 32k ROM, 2k RAM, 4 channel 16 bit ADC, and 2 channel 10-bit DAC current control output.
* Output current automatic dec. if overload.
* Built-in watch-dog timer.
* Reverse polarity protected.
* Recharges 1 - 10 cells 100mAh - ￥mAh. Output current can be changed from 0.1A to 6.5A ( 0.1A step) and discharging current is 0.1A to 3A (0.1A step) with automatic discharger cut off voltage setup.
* 16 character dot-matrix LCD, display with output V, output A, mAh, time, average V, Wh, peak V, set charger A, set discharger A, input V and mode.
* Precision level reaches to 2 unit places and 3 decimal places. e.g. 11.934V.
* Built-in cooling fan.

Specifications:

* Input Voltage: DC 11V to 15V, 12V lead-acid battery or APEX V12 220V AC S.P.S
* Current drain: max approx 10A
* Normal battery voltage: 1.2V to 12.0V (1 to 10 NICD / NIMH cells)
* Charge current: 0.1A to 6.5A up to 15V, 0.1A to 4.0A over 15V
* Automatic charge termination: Delta Peak process
* Trickle charge current: approx. 80mA
* Discharge current: 0.1A to 3.0A
* Discharge termination: automatic, at approx. 0.8V / cell
* Max. discharge power: approx. 25W
* Protective functions: Polarity protection at input and output, short-circuit protection on output, overheating protection, low voltage protection.
* Fuse: 7.5A car fuse
* Dimensions: approx. 100*140*52mm

check this pic and spec
http://www.etamiya.com/shop/product_...oducts_id=6973
09222823280 - choyie

FOR SALE
 

FOR SALE

BRAND NEW DF03 PINION GEARS
2 PCS TAMIYA 2400MAH NICAD BATTERY



09222389289

for sale!
 

Porshaa's Stuffs for sale!

Hpi Dbox drift assist system - 2.5k
Spektrum dx2.0 tx and rx - on hold
Hpi pro4 purple alum battery lock -SOLD
Heatsink / Jig for batt with dual cooling fan - SOLD
Much more powermaster mini (bnew cond) - on hold
Duratrax ice charger (nicd, nimh, li-ion, li-po) with temp probe - on hold
trinity tire warmers - 800
picooZ mini heli - 900


NOTE: all prices fixed. all items in excellent condition.
contact 09196407770 for sure buyers.
thanks!

http://aycu38.webshots.com/image/429...4862072_rs.jpg
http://aycu02.webshots.com/image/427...7850442_rs.jpg
http://aycu29.webshots.com/image/415...3238676_rs.jpg

http://aycu01.webshots.com/image/450...8357104_rs.jpg

sensya na hindi ko pa tinatangal yung mga electronics pag may buyer nalang =)

selling for a friend
 

For sale kyosho inferno 7.5 Php 20,000.00 neg
A1 condition almost brandnew, only run once
never been raced.

contact no. 0918-991-4889

also for sale Team Associated 2wd offroad RTR pre assembled 1o,000 neg

contact no. 0921-803-1010

Tamiya 414 TRF rolling chasis for sale
Tamiya Racing Factory

-carbon fiber plate main chasis
-cf upper deck
-allum shocks
-allum bulkhead
-allum front and rear diff housing
-allum toe blocks
-hardened graphite suspension arms
-full ball bearings
-adjustableturn buckles
-cf front and rear shock tower
-cf spur gear press plate
-allum motormount
-allum spur gear holder
-front and rear stabilizer
-good condition.
-no deffects
-no parts to be replaced
-usual scrathes in the bottom of the chasis
-selling for 4.5k neg
or swap with hop-uped tao5

http://img144.imageshack.us/img144/6237/trf414mvu9.jpg
http://img232.imageshack.us/img232/679/trf414m2bm5.jpg
pics for reference only


Tamiya TL01 basic kit
-full ball bearings
-includes another chasis and shaft (shorten to fit mini cooper body, customize)
-oil shocks
-hpi toyota celica body for bashing
-includes pick up truck body (hard shell)
2k

Tamiya Ta02 kit
-frp chasis and upper deck
-oil shocks
-full ball bearings
-allum motor mount
2k

Tamiya F103 formula 1 kit
-frp chasis
-stock
2k

Academy boat
-dont know the model, around 3 feet in lenght
-electric and gas convertable
2k

Tamiya teu101bk esc
-2 units available
800 each

Jr racing xr2 digital radio
-reciever
-no glitch
-almost brand new
-2 model memory
3k

Airtronics Mx3 digital radio
-receiver
-multiple model memoty
-3rd channel
-fm modulation
3.5k

09228685384

for sale plane engine and futaba s3001 servo
 

*OS MAX 46sf used 3.5k
*25 thunder tiger engine for PHP2,000
*4 servo(3 futaba s3001 and 1 generic servo) for php1,500


or get all 6k

09287751101

FOR SALE NOVAK EVX ESC 14.4V, BNEW WITH ORIGINAL TAMIYA PLUG, 2 NEW TITAN MTR. 14.4V.. IDEAL FOR EMAXX, ESAVAGE OR CRAWLER TRUCK... 7.5K

FOR SALE BNEW HOT BODIES GT ELECTRONIC SPEED CNTRL 14.4V.. 4.5K

FOR SALE SLIGHTLY USED NOVAK EVX ESC... 4.5K

FOR SALE 2 NOVAK GT7 ESC, NO MTR. LIMIT, FRESH CONDITION, ORIG WIRES, BOX N MANUAL... 3K EACH

FOR SALE KEYENCE 2002 ZERO V XTREME ESC, IN PERFECT CONDITION...3K NO MTR. LIMIT

FOR SALE FUTABA MC230, 20TURN LIMIT, FRESH... 1.2K WITH REVERSE

FOR SALE EAGLE RACING CDC VER.6 CHARGER, 1-10CELL NICD,NIMH., 20AMPS DISCHARGE, FRESH CONDITION, BOX N MANUAL...3.5K

FOR SALE NOVAK 4.5R VELOCITI MTR.. SUPER FRESH CONDITION... 3K ONLY

NO TRADE, NO PM

09063147021-KENET:nod:

HPI Savage Rotostart 2
 

Brand New HPI Savage X Rotostart 2 for only P2,000

09167543471

Thanks

looking for
 

looking for:
ko propo micro rx for ex-1 mars with fm crystals(41mhz)
pede rin set ng rf module and receiver
kelangan na kelangan ko lang talaga:(
:(:(

text me your offers@09215209614-VINCE
Baguio City

thanks!