Go Back  R/C Tech Forums > International Forums > Manila Racers
Electric Touring / On-Road RC >

Electric Touring / On-Road RC

Like Tree1Likes

Electric Touring / On-Road RC

Old 11-01-2005, 06:19 PM
  #8431  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

HMAN - Would you happen to have LCG/BD rear ball studs (tall ones for the rear hub) in your inventory? If yes, could I get it from you Sat morning and replace it when PITSHOP BOSS arrives?

Found out kasi that I bent one of them in my LCG, besides a hinge pin. Didn't have any in stock because I didn't think that this could happen. No wonder the LCG had been handling weird all Saturday, even when I removed all the setup modifications that I did already - - - parang CGM ni ITIM.

ITIM - Handa na yung FERAL matched packs mo at yung bago mong set ng SOREX 40s. Mounted yung SOREX tires duon sa chrome rims na binigay ni KUPZ as per your request!!!! Btw, Tamiya sponge inserts ang dapat kong ilagay, di ba?

Last edited by joelt; 11-01-2005 at 06:32 PM.
joelt is offline  
Old 11-01-2005, 06:22 PM
  #8432  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

Originally Posted by highwayman
yesterday, the weather was unbelievable !!!! clear blue skies all throughout the day... i guess malakas pa rin ang mga EP racers kay Sta. Clara. Thank you.

... and Congrats to Mr. Shims !!! i think he shimmed his motor yesterday to perfection, becuase it was F-A-S-T !

See you all on Nov. 5 !!!

new layout will be in effect for the masters !
HMAN - Sila ROBO and FBJ were at the track yesterday to try out the new layout. Too bad I wasn't able to join them 'coz of my LCG's problem

MR SHIMS - Oo nga. Ang tulin nung pinang di-discharge mo na motor.
joelt is offline  
Old 11-01-2005, 06:23 PM
  #8433  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

Originally Posted by XTREMERCHOBBIES
wala yan sa kotse nasa motor yan
Eh alin naman para sa iyo ang mas matulin na motor, DC or Team Brood???
joelt is offline  
Old 11-01-2005, 06:30 PM
  #8434  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

Originally Posted by jayps
tama si xtreme boss dito. nasa motor talaga.
jas luk at mr shims "generic" motor. 22000 lang rpm nun.
pinang discharge pa sa mga gamit na packs.

galing mo, Takumi!!!!
Ang lupit mo!!! Generic pala para sa iyo ang Trinity Epic Pro motors (Pro kung may dyno readings). Ganyan din naman yung gamit namin ni PITSHOP boss, ha. His had a 23k reading while mine had 21k!!!
joelt is offline  
Old 11-01-2005, 09:13 PM
  #8435  
Tech Rookie
 
Join Date: Nov 2005
Posts: 15
Default

san ppwede kumuha manual ng TLO1 tamiya? thanks

at kung may pics sana kayo ng steering assembly pa send..
tamiyaboy is offline  
Old 11-01-2005, 11:19 PM
  #8436  
Tech Elite
iTrader: (56)
 
pitshop's Avatar
 
Join Date: Sep 2001
Posts: 3,765
Trader Rating: 56 (98%+)
Default

BD SWEEPS THE MASTERSQUALIFYINGWARMUPS

STOCK MASTERS WARMUP

1 CHOLO PARAGAS - YOKE BD - EPIC 27
2 MIKE ANG - YOKE BD - EPIC 27
3 CARLO DIONISIO - MI2 - DC
4 MIKE DIONISIO - MI2 - DC
5 JOEL TINIO - YOKE LCG - EPIC 27
6 JON - MI2 - BROOD
7 JP CALIMBAS - MI2 - DC
8 SENNEN - DNF

MOD MASTERS WARMUP

1 JASON RODRIGUEZ - YOKE BD - REEDY
2 MIKE ANG - YOKE BD - TRINITY
3 GERRY SOLER - AE FTTC4 - ORION
4 RONALD ITIM - UNKNOWN CAR - ORION
5 SONNY YALUNG - AE FTTC4 - EPIC

see you guys this saturday at the official start of the Masters Qualifying!!!
Will post updated schedule soon!
pitshop is offline  
Old 11-01-2005, 11:30 PM
  #8437  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

Originally Posted by pitshop

4 RONALD ITIM - UNKNOWN CAR - ORION

Time to change your car!!!! . . . . . Ayaw na kasing kilalanin ito ng Family ah este Factory Sponsor mo eh.
joelt is offline  
Old 11-01-2005, 11:39 PM
  #8438  
Tech Champion
iTrader: (7)
 
ROBORAT's Avatar
 
Join Date: Nov 2001
Location: JP Raceway
Posts: 5,360
Trader Rating: 7 (100%+)
Default

Originally Posted by joelt
HMAN - Would you happen to have LCG/BD rear ball studs (tall ones for the rear hub) in your inventory? If yes, could I get it from you Sat morning and replace it when PITSHOP BOSS arrives?
jt: if you have the shorter yok ball studs, all you have to do is shim it up so that ends up the same hight as the long neck (silver) studs. that should solve your probelm while maintaing the same rear roll center as you would with the standard studs.
ROBORAT is offline  
Old 11-01-2005, 11:41 PM
  #8439  
Tech Master
 
Fatboy Joe's Avatar
 
Join Date: Apr 2002
Location: Coming soooooon
Posts: 1,052
Default

Originally Posted by pitshop
BD SWEEPS THE MASTERSQUALIFYINGWARMUPS

see you guys this saturday at the official start of the Masters Qualifying!!!
Will post updated schedule soon!

Yes, thanks so much, the track was so clean and dust free. This is the 1st time that it was spic and span. Thanks for sweeping Joke lang po Pinapabayaan lang ng mga 'kano yang mga hapon na yan, sa sabado, iba na ang usapan, hehehehe, diba robo
Fatboy Joe is offline  
Old 11-01-2005, 11:43 PM
  #8440  
Tech Master
 
Fatboy Joe's Avatar
 
Join Date: Apr 2002
Location: Coming soooooon
Posts: 1,052
Default

sorry, double post
Fatboy Joe is offline  
Old 11-01-2005, 11:51 PM
  #8441  
Tech Elite
iTrader: (12)
 
rough512's Avatar
 
Join Date: May 2002
Posts: 3,455
Trader Rating: 12 (100%+)
Default

JT: I have an extra.
rough512 is offline  
Old 11-01-2005, 11:51 PM
  #8442  
Tech Champion
iTrader: (7)
 
ROBORAT's Avatar
 
Join Date: Nov 2001
Location: JP Raceway
Posts: 5,360
Trader Rating: 7 (100%+)
Default

fbj: korek! laban yan sa sabado! practis ka ha! hehehe ... la akong oras maka-practis e. only ran one pack yesterday tapos umulan na! dunno kung makaka practice ako sa sabado.

pitshop: if you are gona change one thing in the layout, baka pwede mag suggest. actually, baka naman pareho din ang balak mo so will wait and see nalang on sat.
ROBORAT is offline  
Old 11-01-2005, 11:52 PM
  #8443  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

Originally Posted by ROBORAT
jt: if you have the shorter yok ball studs, all you have to do is shim it up so that ends up the same hight as the long neck (silver) studs. that should solve your probelm while maintaing the same rear roll center as you would with the standard studs.
I tried doing this yesterday. Problem was that there was hardly any thread left when I tried it. . . . have to raise the ball stud kasi by about 2mm or more eh

Bahala na si at si sa Sat. . . . Ilabas sa garahe ang SDW para makahabol sa mga BD !!!!
joelt is offline  
Old 11-01-2005, 11:56 PM
  #8444  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

Originally Posted by rough512
JT: I have an extra.
Ayun naman pala eh!!! Don't tell me kakahuyin mo yung sa LCG mo, though?. . . . In any case, peram hanggang makakuha ako galing kay PITSHOP BOSS ng kapalit. . . . . Para nde na kailangang ilabas sa garahe si SDW.
joelt is offline  
Old 11-01-2005, 11:57 PM
  #8445  
Tech Champion
iTrader: (7)
 
ROBORAT's Avatar
 
Join Date: Nov 2001
Location: JP Raceway
Posts: 5,360
Trader Rating: 7 (100%+)
Default

jt: yup, mite be a problem with having enuff threads to screw in the studs nga. anyway, meron naman pala extra si rough eh ... since din naman nya ginagamit yung LCG nya. at least you can use those until mang has stocks.
ROBORAT is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.