1LikesElectric Touring / On-Road RC
09-28-2005, 08:33 PM
#7981
striker: 12th scale rocks! 
no doubt the 12th scale heats were much more enjoyable to watch. no offense to tc (i love the class as well), but for a track like that 12th scale is the way to go. wait, come to think of it, in the worlds in south africa, the dicing in the 12th scale heats were also amazing!
..... wala bang may gusto magpatayo ng carpet track? sige na please!
jp? moto? hehe 
no doubt the 12th scale heats were much more enjoyable to watch. no offense to tc (i love the class as well), but for a track like that 12th scale is the way to go. wait, come to think of it, in the worlds in south africa, the dicing in the 12th scale heats were also amazing! ..... wala bang may gusto magpatayo ng carpet track? sige na please!
jp? moto? hehe
09-28-2005, 08:47 PM
#7982
rbboy: try ko pero no promises. was ok for saturday na sana. tignan ko nalang kung magagawan ko ng paraan. ronch is out na din daw kung sunday.
fbj: lupit no? wala akong masabi. granted he had killer batts, his lines were just some much tighter than that of cyrul. even during the middle stage when cyrul still had a lot of rip, blackstock just had an awesome rhythm. sa sobra nga nyang tight sa corners, sumabit sa chicanne. a lesser racer would not have been able to catch up even with batts like that. likely he was using reedy packs (GP based) while cyrul SMCs (i hope they were not IBs hahaha
).
fbj: lupit no? wala akong masabi. granted he had killer batts, his lines were just some much tighter than that of cyrul. even during the middle stage when cyrul still had a lot of rip, blackstock just had an awesome rhythm. sa sobra nga nyang tight sa corners, sumabit sa chicanne. a lesser racer would not have been able to catch up even with batts like that. likely he was using reedy packs (GP based) while cyrul SMCs (i hope they were not IBs hahaha
).
09-28-2005, 09:10 PM
#7983
Highwayman:I charged my GP3700 last night, discharged 30amps via Integy then trayed down to .9V/Cell, charged at 5amps linear using MM Charger, 3751amps at 9.09V Peak. I think traying down to .1V/cell is not good. 
RBBOY:I'll try kung makakalusot, bitinnga eh, sayang kasi ang ganda ng setup ko ngayon, ultra power steering!
ROBO:Yes, you are right, skills are just complemented by nice batts and motor. They just make beating the other guys much much easier. I've never seen a come back similar to what Blacky did. Galing talaga sobra
Mr. Shims:
RBBOY:I'll try kung makakalusot, bitinnga eh, sayang kasi ang ganda ng setup ko ngayon, ultra power steering!
ROBO:Yes, you are right, skills are just complemented by nice batts and motor. They just make beating the other guys much much easier. I've never seen a come back similar to what Blacky did. Galing talaga sobra
Mr. Shims:
09-28-2005, 09:38 PM
#7984
fbj: why do you say discharging to 0.1v per cell isnt good? i'd like to know coz this is what i've been doing to my cells .... although i only tray to 0.1v just before charging ... as in pagkatangal sa tray, deretso sa charger agad. seemed ok but if you have found a better method, please share it. .... i usually get 3900-4000 amps in my GPs at about 8.9-9.0 peak volts. this is using an old mill pro charger.
nga pala, patulong sa pag set-up ng much more cell master. finally got one and its still in the box. tamad ako mag-basa ng manual. paturo nalang thanks men!
.... i usually get 3900-4000 amps in my GPs at about 8.9-9.0 peak volts. this is using an old mill pro charger.nga pala, patulong sa pag set-up ng much more cell master. finally got one and its still in the box. tamad ako mag-basa ng manual.
paturo nalang thanks men!
09-28-2005, 10:03 PM
#7985
FBJ 
09-28-2005, 10:06 PM
#7986
FBJ: Isa Mod isa Stock
I have a long term goal S23 M 25
I have a long term goal S23 M 25
09-28-2005, 10:28 PM
#7987
Mr. Shims: Stop asking for info about that "girl"!!!! Just take "her" for a spin. Cge, ka baka may maka sulot sayo. Here we go again ka talaga!!!
Remember, you can be married to "mimi" but she won't find out about "BelinDa".hahahahaha
Cge, ka baka may maka sulot sayo. Here we go again ka talaga!!! Remember, you can be married to "mimi" but she won't find out about "BelinDa".hahahahaha
09-28-2005, 11:46 PM
#7988
ROBO: I noticed that my cells (IB3600) would peak at a higher voltage when I bring them down to .1V/Cell. Cell life also kinda shortens. I have no other way of doing it, just the usual discharge to 5.4, rest then charge 500 sec then store. It was just by accident that I notice that when I tray to .9V/cell, peak voltage improved, on both brands, IB and GP.
Mr. Shims: That's why it's called a hobby - FUN
Jayps:Very nice explanation
Mr. Shims: That's why it's called a hobby - FUN
Jayps:Very nice explanation
09-29-2005, 06:54 AM
#7989
fbj: interesting. I'll try to experiment with my my packs. i'll charge one after cutting off at .9v and another at .1v. I'll log the charging results to compare. let you know what i observe.
rbboy: looks like i'll be able to race this sunday. ginagawan ko na ng paraan. unfortunatley di pa rin pwede si ronch. hope lem and fbj can still make it. ... gusto ko na talaga i-sayad tong fttc4 ko!
let you know what i observe.rbboy: looks like i'll be able to race this sunday. ginagawan ko na ng paraan. unfortunatley di pa rin pwede si ronch. hope lem and fbj can still make it. ... gusto ko na talaga i-sayad tong fttc4 ko!
Last edited by ROBORAT; 09-29-2005 at 07:55 AM.
09-29-2005, 04:34 PM
#7990
ROBO:I noticed that the peak voltage of my bnew GP3700 went down from 9.2V to 9.09 after I trayed it down to .9V/cell only. The IB3600s also went down abit. I dont know if it was the weather but It seemed to be a hot day when I charged and I didn't even use a fan.
09-29-2005, 11:05 PM
#7992
Originally Posted by XTREMERCHOBBIES
Dc UL arm shortage!!!
Tipid muna kayo sa DC UL arms nyo kasi just spoke to Curtis and he has a problem with his machinist so hindi ako makakuha ng UL arms. Watch out for his new motor!!! Let you know about it asap
See you all on Sunday
Tipid muna kayo sa DC UL arms nyo kasi just spoke to Curtis and he has a problem with his machinist so hindi ako makakuha ng UL arms. Watch out for his new motor!!! Let you know about it asap
See you all on Sunday
alam ok kung anong motor yan!!!!!!!!! pa reserve na ako ng 1!!!!!! 8x1 pls
09-30-2005, 12:21 AM
#7993
Originally Posted by S-T-R-l-K-E-R
alam ok kung anong motor yan!!!!!!!!! pa reserve na ako ng 1!!!!!! 8x1 pls
09-30-2005, 06:11 AM
#7994
Originally Posted by S-T-R-l-K-E-R
alam ok kung anong motor yan!!!!!!!!! pa reserve na ako ng 1!!!!!! 8x1 pls
share ka naman!