Go Back  R/C Tech Forums > International Forums > Manila Racers
Electric Touring / On-Road RC >

Electric Touring / On-Road RC

Like Tree1Likes

Electric Touring / On-Road RC

Old 08-05-2004, 10:18 PM
  #2761  
Tech Elite
iTrader: (12)
 
rough512's Avatar
 
Join Date: May 2002
Posts: 3,455
Trader Rating: 12 (100%+)
Default

Originally posted by marvi
hassle lang magkalikot ng evo3. mahirap magpalit ng spur at di ganon kadali magset ng mesh, di tulad ng 04. plus, my first few runs claimed a front 1-way bevel gear. but since nilagyan ko na ng shim, mukhang nabawasan yung wear sa bevel gear. may nabasa ako na may nilabas daw na mas matibay na bevel gear but wala pang part no., intayin ko na lang.
Yan yun isang reason kaya medyo hestitant ako sa shaft drive. Pag nabangga ka, ang unang bibigay yung bevel gear, unlike sa belt drive. Also, the weakness of the evo3 is the ring and bevel gears. Documented na yan and acknowledged na ng tamiya ang flaw na yan note that with the evo4, they came up with a metal ring gear na. I'd imagine the were not able to solve the problem with the plastice gears. Yung evo1 and evo2, ganun dina ng problem pero di kasing grabe ng evo3, siguro dahil mas malaki yung mga gears, yung stress sa bevel gear, mas konti.

Marvi, may xray na ako, so I don't have the need for an '04.
rough512 is offline  
Old 08-05-2004, 10:30 PM
  #2762  
Tech Elite
iTrader: (82)
 
Join Date: Sep 2001
Posts: 3,200
Trader Rating: 82 (100%+)
Default

rough512: i agree, ang dami kong nababasa noon na weak link talaga yung front diff. may floating shaft na nilabas yung tech racing but out of production na yata ito. yung evo4 drivetrain naman, di raw pwede iretrofit sa evo3. yung TB02 shaft na mas mahaba sa original evo3, nakaka minimize ng breakage kasi nababawasan yung play sa shaft. unfortunately, wala pa sa lhs. meron na rin daw stronger plastic gears but di ko alam yung part no.

nung nilagyan ko ng shim yung shaft, mukhang di na masyadong nasisira yung front gear. nabangga ako 3x na siguro na head-on sa barrier, biglang atras yung kotse, pero ok pa yung gears so i guess the shim works. anyway, text na lang kita re. your evo3, gusto ko rin ulit makita. baka nasa track ka on sunday, ill try to pass by. thanks pare
marvi is offline  
Old 08-05-2004, 10:42 PM
  #2763  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

ROUGH - Madali lang ang solution dyan sa pinoproblema mong yan. . . . . . Wag kang bumangga.

Seriously, I've noticed this problem to considerably decrease in my case, after I mastered the practice of letting go of the throttle immediately before I crash. . . . . Give it a try as it might help.

Also, proper shimming helps as mentioned by MARVI. . . . not only for the forward-backward movement of the shaft gear, but also the left-right movement of the diff inside the diff case/bulkhead. As ROBO would put it, parang gear mesh din yan ng motor pinion and spur gear.

Subukan mo na kasing mag CGM. NTC3 bumper lang sa unahan ang katapat. Masiraan ka man, parating may pyesa si PITSHOP BOSS. Pde ka pang mamili kung gusto mo ng mahal (graphite) or mura (plastic).

BLP
joelt is offline  
Old 08-05-2004, 11:11 PM
  #2764  
Tech Champion
iTrader: (7)
 
ROBORAT's Avatar
 
Join Date: Nov 2001
Location: JP Raceway
Posts: 5,360
Trader Rating: 7 (100%+)
Default

rough: tama si blp, bili ka na ng CGM. gusto mo bilhin yung sakin? hehehe
ROBORAT is offline  
Old 08-05-2004, 11:16 PM
  #2765  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

ROBO - Alam ko na kung bakit inaalok mo yang CGM, gusto mo kasing magkaroon ng kit na namesake ng idol ko, ano?

Cge, give me feedback after. Malay natin, baka pati ako mapagaya . . . . . . . . sa pagbili.

BLP
joelt is offline  
Old 08-05-2004, 11:42 PM
  #2766  
Tech Fanatic
 
S-T-R-l-K-E-R's Avatar
 
Join Date: Jan 2003
Location: CS RACING / RIDDLER HOBBIES
Posts: 973
Default

tech & tuner - bro there is this new dude he seems to be quite enthusiastic with his kit. if you ask me he is full of hot air!!! but who am i to judge hes name is auldyboy. he may have some info for your corner. whatever he says just list it down sa dont's. kasi siguradong non-sense lang yun.
S-T-R-l-K-E-R is offline  
Old 08-05-2004, 11:48 PM
  #2767  
Tech Elite
iTrader: (6)
 
lem2's Avatar
 
Join Date: Oct 2001
Location: OC
Posts: 3,061
Trader Rating: 6 (100%+)
Default hello

eto hinihika pa din!

Rough: yun problem sa pag palit ng spur, meshing is corrected sa CGM, and ala nasisira just folow BLP, na rpm bumper! ala pa ako nasisira sa CGM ko na gears

ROBO: schumacher?

BLP: ikaw nabahala to welcome auldley boy, I hope all of you will be blessed with good weather tomorrow!

BLP/MARVI: mas mabilis ba talaga sa 04 and front and center one way? Is it more efficient?
lem2 is offline  
Old 08-06-2004, 12:00 AM
  #2768  
Tech Master
 
joelt's Avatar
 
Join Date: Mar 2002
Location: Capitol Speedway
Posts: 1,918
Default

LEM2 - Looks like I won't be able to make it tomorrow. . . . . Natatakot kasi ako kay AULDEY BOY eh. Tama na yung nilalap ako nila ROBO at HMAN ng 2 laps kada heat. Baka kasi pagdating kay AULDEY BOY, maging 5 laps pa yun.

Seriously, there's work here to be done in the office over the weekend. . . . . The decision to push through with our planned activity was finalized just this morning. So, no fun for me and ROUGH for sure. Nag-iisip na nga ako ng paraan para madamay din pati si TAGA eh.

STRIKER - Take charge ka na lang sir. Give AULDEY BOY a warm welcome. Malay mo, makapagbigay pa sa iyo yan ng tuning secrets for you stock and 19t motors.

BLP
joelt is offline  
Old 08-06-2004, 12:13 AM
  #2769  
Tech Regular
 
Raynor's Avatar
 
Join Date: Jul 2003
Location: My Idol!
Posts: 318
Default

Sana nga walang ulan, can't wait to see auldey boy's shaft driven Auldey 1/10. Kung sakali ngayon pa lang ako makakakita.
Raynor is offline  
Old 08-06-2004, 12:39 AM
  #2770  
Tech Elite
iTrader: (6)
 
lem2's Avatar
 
Join Date: Oct 2001
Location: OC
Posts: 3,061
Trader Rating: 6 (100%+)
Default BLP

Di bale! okay naman ata na boss eh--laging busog sila rough at taga!

Tapos laki pa bonus sa X'mas pambili ng kung ano man pang RC!

Enjoy the weekend na lang sa inyong lahat!
lem2 is offline  
Old 08-06-2004, 01:25 AM
  #2771  
Tech Addict
iTrader: (1)
 
chambalero's Avatar
 
Join Date: May 2003
Location: RC limbo
Posts: 504
Trader Rating: 1 (100%+)
Default Re: Looking for a Contributors

Originally posted by Tech&Tuner
I am a magazine editor of an upcoming title called Tech&Tuner. Brought to you by C! Publications .

We are on the lookout for contributors that can cover RC races and report on them. Since there aren't any Philippine based RC magazines, we are putting up a section in our magazine dedicated to RC cars. It's a shame that more people don't know more about this hobby that we love so dearly. So, this is our way of helping out the hobby.

If anyone is interested, please email me at [email protected] .
Hi! i thought Chuck Montecillo was the RC contributor for C! mag. Are you Chuck? Anyway, it's a really great mag!

STRIKER: laki ng galit mo kay auldeyboy ah! I really doubt he's gonna show his face on sat
chambalero is offline  
Old 08-06-2004, 01:53 AM
  #2772  
Tech Elite
iTrader: (82)
 
Join Date: Sep 2001
Posts: 3,200
Trader Rating: 82 (100%+)
Default Re: hello

Originally posted by lem2
... BLP/MARVI: mas mabilis ba talaga sa 04 and front and center one way? Is it more efficient?
pagaling ka na para makapag offroad this sunday bawal magkasakit pag weekend

i have no hard evidence na mas mabilis ang 04 pag naka front and center 1way feeling ko lang na parang mas madulas tumakbo pag naka double 1-way kasi mas maraming rotating parts ang nakaka freewheel offthrottle. but i may be wrong kasi di ko pa nakocompare back to back ang front 1way only vs. front and center 1way.

also, the main reason im running both 1ways is kasama na to sa car nung nakuha ko, sayang naman kung di ko magagamit
marvi is offline  
Old 08-06-2004, 02:29 AM
  #2773  
Tech Regular
 
Raynor's Avatar
 
Join Date: Jul 2003
Location: My Idol!
Posts: 318
Default Re: Re: Looking for a Contributors

Originally posted by chambalero
STRIKER: laki ng galit mo kay auldeyboy ah! I really doubt he's gonna show his face on sat
Hey! wag naman sana, I've already cancelled some of my appoinments tom. just to see a shaft driven auldey.
Raynor is offline  
Old 08-06-2004, 05:20 AM
  #2774  
Tech Master
iTrader: (8)
 
babytoy101's Avatar
 
Join Date: Aug 2003
Posts: 1,534
Trader Rating: 8 (100%+)
Default

auldey boy, magpakita kaya yun! hehehe! may naaalala 2loy ako........... wahahahaha!
striker give auldey boy a warm welcome (dapat sira kagad chasis!) hehehe!

rough: may time ka ba bukas?? mukhang wala ata noh!
balugz: ikaw sa sept. pa laya mo....... pakabait ka para may parol na! (mery chistmas!)

dun sa mga shaft kit owners, how do you make the drive train free!? as in you can make the wheel turn by blowing it!
babytoy101 is offline  
Old 08-06-2004, 06:31 AM
  #2775  
Tech Elite
iTrader: (6)
 
lem2's Avatar
 
Join Date: Oct 2001
Location: OC
Posts: 3,061
Trader Rating: 6 (100%+)
Default babytoy101

Originally posted by babytoy101
dun sa mga shaft kit owners, how do you make the drive train free!? as in you can make the wheel turn by blowing it!
You should see my TL-01, Demon and CGM tawag dun
PIA Tuned!!!!!!!

Basically its about blueprinting the cases, gears, shimming properly (that's a trial and error parts) and bearing maintenance!

Depends on the car? ano na ba car mo? Cuda?

do not know how to input a video eh, I normally get 5-6 seconds when newly cleaned. Dun sa Site ng TC3 10 sec.!

Last edited by lem2; 08-06-2004 at 07:02 AM.
lem2 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.