R/C Tech Forums

Go Back   R/C Tech Forums > International Forums > Malaysian R/C Racers

Reply
 
Thread Tools Search this Thread
Old 10-25-2005, 05:36 AM   #1
Tech Apprentice
 
Join Date: Mar 2005
Location: KL
Posts: 96
Default 2006 IFMAR 1/10TH 200mm On- Road PRE-WORLD



2006 IFMAR 1/10TH 200mm On- Road PRE-WORLD
incorporating the 2006 AARCMCC 1/8th and 1/10th Scale Queensland State Championship

When: - February 19th - February 26th 2006

Where: England Park Raceway, Cnr.Leitchs' Rd. and Starthwyn St. Brendale, Queensland, Australia 4500

Class: 1/8th & 1/10th 200mm

Rules: Current IFMAR Rules.

Format: 6 x 10 minutes heats. Christmas Tree Finals

Entry Fee: $100 AUD Including Banquet Dinner (additional entry extra $15 each class) (Extra persons for Banquet $35 each)

Sunday Feb 19, 2006 - Free Practice

Monday, Feb 20, 2006 - Free Practice, Driver Registration, Technical Inspection

Tuesday, Feb 21, 2006 - Technical Inspection (no inspection available during ceremony), Driver Registration, Controlled Practice, Opening Ceremony and Concours, Driver's Briefing, Qualifying all classes

Wednesday, Feb 22, 2006 - Drivers Briefing, Qualifying all classes

Thursday, Feb 23 - Qualfiying all classes

Friday, Feb 24 - Qualifying all classes, Lower Finals

Saturday, Feb 25 - Upper Finals, Presentation Dinner

Sunday, Feb 26 - Spare day if required.

Last edited by Danny Teh; 02-28-2006 at 04:13 AM.
JeremyLee is offline   Reply With Quote
Old 10-25-2005, 05:38 AM   #2
Tech Apprentice
 
Join Date: Mar 2005
Location: KL
Posts: 96
Default

Please get in touch with us, RCMRC, if you wish to go for the Pre-Worlds

[email protected]

Thank you for your support
JeremyLee is offline   Reply With Quote
Old 12-13-2005, 04:25 AM   #3
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Track & Facility Redevelopment

Track & Facility redevelopment work is well underway for the 2006 IFMAR 1/10th 200mm On Road World Championship. You will find images of some of the work undertaken so far at the following link starting at post #196.

Upgrades that have commenced are as follow:

Sunken Pits
Controlled Fuel Staging Area
Controlled Fuel Storage
Tyre Truing Area Expansion
Engine Run In Area
Replacement of all Pit Benches to IFMAR Standard
Painting of all Buildings
Replacement of Race Control Building with new 8 x 6m Building (Building finished ready for delivery)
Purchase of Electronic Scorboard
Track Resurfacing

Don't forget only 18 days until entries close for the Pre World Championship so get in your entries ASAP.

A late entry fee will apply after the 31st of December and no entries will be accepted after January 31st 2006.

All the latest information on the Pre Worlds and Entry forms can be downloaded from the World Championship website at http://www.200mmifmarworlds.com

Kind Regards

Alastair Walker
quozl is offline   Reply With Quote
Old 01-01-2006, 05:46 PM   #4
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default IMPORTANT: IFMAR Rules & IFMAR Body List

The International Federation of Model Auto Racing has provided us with the current IFMAR Rules & The IFMAR Body List for the Pre World Championship and they have now been added to the worlds website.

They are available in the Downloads section and all competitors should read them and make sure their cars comply to the rules.

Section 5 of the IFMAR rules has the technical specifications for the 200mm cars.

Regards Alastair
quozl is offline   Reply With Quote
Old 01-01-2006, 08:32 PM   #5
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Queensland Government Gambling Community Benefit Fund Donation

The organising committee of the 2006 IFMAR 1/10th 200mm On-Road World Championship along with the committee of the Queensland Radio Circuit Car Racing Association Inc would like to thank the Queensland Government's Gambling Community Benefit Fund for their kind donation of funds to purchase our new race control building.

Without the proud support of the Queensland Government's Gambling Community Benefit Fund projects such as these would be difficult if not impossible to undertake.


Last edited by quozl; 01-01-2006 at 08:50 PM.
quozl is offline   Reply With Quote
Old 01-04-2006, 04:34 PM   #6
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default HobbyPro Joins World Championship Sponsors

HobbyPro Joins World Championship Sponsors


The organising committee would like to thank HobbyPro from Hong Kong for their kind & generous support of the 2006 IFMAR 1/10th 200mm On Road World Championship.

Last edited by quozl; 01-08-2006 at 02:51 AM.
quozl is offline   Reply With Quote
Old 01-09-2006, 01:29 AM   #7
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Pre World Championship Nominated Drivers List

Pre World Championship Nominated Drivers List

The Nominated Drivers List for the Pre World Championship is now available for viewing in the downloads section of the website.

If you have nominated for the Pre Worlds please check to make sure your name is on the list. If you have any questions regarding your nomination please contact Doug Barber the event chairman at [email protected]
quozl is offline   Reply With Quote
Old 01-11-2006, 01:00 AM   #8
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Track Redevelopment Work

Today the curbing for the pitlane was installed. The contractor uses a machine that puts down a very dry concrete mixture. This is then covered with a concrete finishing slurry and trowelled smooth. Images of todays work can be seen in the Photo Gallery section of the worlds website.

Regards Alastair

Last edited by quozl; 04-04-2011 at 10:36 AM.
quozl is offline   Reply With Quote
Old 01-11-2006, 09:53 PM   #9
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default 1/8th Scale to run at the Pre Worlds

1/8th Scale to run at the Pre Worlds

The 2006 1:8th scale Qld Championship has been re-instated as an event to be run in conjunction with the 2006 IFMAR 1/10th 200mm On Road Pre World Championship.

After consultation with AARCMCC and in light of the slightly lower and expected numbers for the 1/10th pre-worlds AARCMCC has agreed to sanction the Qld 1/8th State Championship as part of the Pre-Worlds event.

From a Host club perspective there needs to be a minium of two heats to conduct the event and competitors must be a financial member of an AARCMCC affiliated club.

Any 1/8th drivers who are interested in competing in this event MUST contact the Chairman on any of the numbers listed below as soon as possible for instructions on how to nominate. Entries will close on 31 January 2006 and NO late entries will be accepted.

If you have already nominated for the 1/10th and you intend to run both scales you will still need to contact the Chairman.

The Organising Committee regrets the late notice and confusion that has occurred over this event but in the end the best outcome was achieved. We would also like to thank Peter Ellis for reconsidering the AARCMCC decision.

Kind regards,
Doug Barber
President QRCCRA Inc, and Chairman of the Organising Committee
2006 IFMAR 1/10th 200mm On-road World Championship
E-mail: [email protected]
Mob: +61 04 1195 3703
Tel: +61 07 3263 3703
Fax: +61 07 3263 1265
quozl is offline   Reply With Quote
Old 01-12-2006, 01:16 AM   #10
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Virtual RC Track Release Imminent

Virtual RC have been hard at work putting the finishing touches to England Park Raceway with the track now in final testing.

The track and it's associated buildings etc are currently represented in VRC before any upgrades had taken place.

Keep an eye on the VRC webste over the next week or so for the release of the track and start practising for the upcoming Pre and World Championships.

We will be supplying VRC with all the updated data of the new track, pits, buildings and banners after the Pre Worlds and they will then be releasing an update to the track to bring it up to current specs in time for the World Championship in September.

The organising committee would like to thank VRC for their support of the 2006 IFMAR 1/10th 200mm On Road World Championship by including the track in their excellent simulator.


quozl is offline   Reply With Quote
Old 01-14-2006, 02:15 AM   #11
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Win a 1/10th 200mm On-Road World Championship Souvenir Cap Contest

Win a 1/10th 200mm On-Road World Championship Souvenir Cap Contest

The contest to win a 2006 IFMAR 1/10th 200mm On-Road World Championship souvenir cap is now open. To enter the contest highlight the "Downloads" link on the Worlds website and select Cap Contest or click the link below.

Fill in the form with your name contact details and answers to the questions and click send.

Entries are limited to one entry per person. The winning entry will be the first correct entry drawn at the close of the competition at midnight on January 30th 2006.

Cap Contest Link

A sneek peak of the back of the cap. All will be revealed soon.




Last edited by quozl; 01-14-2006 at 02:34 AM.
quozl is offline   Reply With Quote
Old 02-01-2006, 02:32 AM   #12
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Pre World Championship Final Nominations List

Pre World Championship Final Nominations List

The final nominations list for the Pre World Championship is now available to view in the Downloads section of the world championship website.

Regards Alastair
quozl is offline   Reply With Quote
Old 02-17-2006, 02:03 AM   #13
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Pre Worlds Practise

Pre Worlds Practise


Competitors have started arriving at the track to get in some free practise before the start of controlled practise on Saturday. Drivers of note already in attendance are Team Kyosho Japan driver Takashi Miyashita along with designer of the Kyosho RRR Yoshinobu Nikaido.

Team New Zealand is here in force with Scott Robinson already turning in some fast laps and young gun Leslie Levendal tearing up the track. As well the HK drivers have all arrived and are hard at work on thier setups and running in engines.

Qualifying starts in earnest on Tuesday and we will have live updates of the results after each heat that will be available in The Event section, so make sure to check back regularly.

Regards Alastair
quozl is offline   Reply With Quote
Old 02-20-2006, 01:54 AM   #14
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Pre Worlds Results - Practise Round 1

Pre Worlds Results - Practise Round 1

Results by heat from the first round of controlled practise can be found in the attached zip file.

There is a further round of controlled practise tomorrow morning with the first round of qualifying getting underway tomorrow afternoon.

Currently the world championship website is offline for maintenance (isn't it always the way when the event starts it spits the dummy) but as soon as it is back up I will start uploading images to the gallery.

Kind Regards

Alastair Walker

Last edited by quozl; 04-04-2011 at 10:36 AM.
quozl is offline   Reply With Quote
Old 02-21-2006, 04:43 AM   #15
Tech Fanatic
 
quozl's Avatar
 
Join Date: Jan 2003
Posts: 944
Default Pre Worlds Results

Results from the second practise round and the first round of qualifying are now available on the world championship website. All things going well tomorrow we will have live updates after each round is complete.

Kind Regards

Alastair
quozl is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
2006 IFMAR 1/10th 200mm On Road World Championship quozl Nitro On-Road 1120 02-28-2007 10:17 AM
2006 IFMAR 1/10th 200mm On-Road World Championship JeremyLee Malaysian R/C Racers 72 09-26-2006 03:04 AM
2006 IFMAR 1/10th 200mm On Road World Championship quozl Hong Kong Racing 42 09-06-2006 08:01 AM
2006 IFMAR 1/10th 200mm On Road World Championship Brisbane Australia quozl Indonesia Racing 30 09-05-2006 06:41 AM
2006 IFMAR 1/10TH 200mm I.C. ON-ROAD WORLD CHAMPIONSHIP phlim Singapore R/C Racers 106 09-05-2006 06:31 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 02:47 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net