HPC Glenmarie RC Speedway
11-19-2004, 12:28 AM
#46
Tech Regular
yeah the price in hong kong is cheap but the price here i m not so sure. you will have to go and check it out.
HPI micro RS4 --
HPC is the dealer
subang,
b10-g, jalan ss15/8a,
47500 subang jaya,
selangor.
03-56371849
XRay m18 --
i think is RCPitstop
P285, The Promenade,
Lower Ground Floor,
1 Utama Shopping Centre,
Lebuh Bandar Utama,
Bandar Utama,
47800 Petaling Jaya,
Selangor Darul Ehsan,
West Malaysia.
Tel: +603-77241668
Fax: +603-77241668
Contact: Terrence Lim
Email: [email protected]
TeamLosi Mini-T --
hobby haven in subang speedway
Hobby Haven Sdn Bhd (408042-D)
No. 29A (1st Floor), SS 15/4,
47500 Subang Jaya, Selangor Darul Ehsan,
Malaysia.
Tel: 603-56316155 / +6016-2035575
Fax: 603-79845282
Email: [email protected]
HPI micro RS4 --
HPC is the dealer
subang,
b10-g, jalan ss15/8a,
47500 subang jaya,
selangor.
03-56371849
XRay m18 --
i think is RCPitstop
P285, The Promenade,
Lower Ground Floor,
1 Utama Shopping Centre,
Lebuh Bandar Utama,
Bandar Utama,
47800 Petaling Jaya,
Selangor Darul Ehsan,
West Malaysia.
Tel: +603-77241668
Fax: +603-77241668
Contact: Terrence Lim
Email: [email protected]
TeamLosi Mini-T --
hobby haven in subang speedway
Hobby Haven Sdn Bhd (408042-D)
No. 29A (1st Floor), SS 15/4,
47500 Subang Jaya, Selangor Darul Ehsan,
Malaysia.
Tel: 603-56316155 / +6016-2035575
Fax: 603-79845282
Email: [email protected]
11-19-2004, 12:41 AM
#47
Tech Rookie
ok
i heard 1/10th and 1/8th scales cars are very popular here now especially IC type. which is better ?????
i heard 1/10th and 1/8th scales cars are very popular here now especially IC type. which is better ?????
11-19-2004, 12:57 AM
#48
Tech Rookie
Rc Mushroom in Cheung Sha wan.
Mini T only US$ 94.00
How much here???? Anybody know????
Mini T only US$ 94.00
How much here???? Anybody know????
11-19-2004, 01:23 AM
#49
Tech Regular
Originally posted by EP_Killer
ok
i heard 1/10th and 1/8th scales cars are very popular here now especially IC type. which is better ?????
ok
i heard 1/10th and 1/8th scales cars are very popular here now especially IC type. which is better ?????
1/10 and 1/8 is very popular. micro is not popular.
wat do you mean by ic type? you mean the Electric powered Rc car??
that one i dont know wor. have to ask other people who is much more experienced in this. im just a newbie
so cheap aR? rc mushroom is selling their mini-t for USD96? so far that is the cheapest price that i know from all the online shop. but i dont know how much they are selling mini-t here. maybe you can try email or call hobby haven?
11-19-2004, 01:36 AM
#50
Tech Rookie
ok
micro not popular then can sell what i have here before i am home soon
ic - internal combustion cars or engine
everything is cheap in hong kong now especially electrics, esc, cars, chargers````````` ( SARS and economic downturn ) i think discounts everywhere very competitive
so check and compare to see what is cheap there and here
even property and cars all are down shopping is good in hong kong now
micro not popular then can sell what i have here before i am home soon
ic - internal combustion cars or engine
everything is cheap in hong kong now especially electrics, esc, cars, chargers````````` ( SARS and economic downturn ) i think discounts everywhere very competitive
so check and compare to see what is cheap there and here
even property and cars all are down shopping is good in hong kong now
11-19-2004, 02:28 AM
#51
Tech Regular
Originally posted by EP_Killer
ok
micro not popular then can sell what i have here before i am home soon
ic - internal combustion cars or engine
everything is cheap in hong kong now especially electrics, esc, cars, chargers````````` ( SARS and economic downturn ) i think discounts everywhere very competitive
so check and compare to see what is cheap there and here
even property and cars all are down shopping is good in hong kong now
ok
micro not popular then can sell what i have here before i am home soon
ic - internal combustion cars or engine
everything is cheap in hong kong now especially electrics, esc, cars, chargers````````` ( SARS and economic downturn ) i think discounts everywhere very competitive
so check and compare to see what is cheap there and here
even property and cars all are down shopping is good in hong kong now
11-21-2004, 07:03 PM
#53
Hi Danny,
The weather have been forgiving the last few days and the dirt is hardening up. If the weather holds, we will construct the jumps this week and then....rock n roll!
As of now, the track is ready for running....just without the jumps.
Cheers,
The weather have been forgiving the last few days and the dirt is hardening up. If the weather holds, we will construct the jumps this week and then....rock n roll!
As of now, the track is ready for running....just without the jumps.
Cheers,
11-22-2004, 07:53 AM
#56
Tech Master
Danny - U wouldnt believe it.A lot of guys more impatient than u folks.Yesterday,they were willing to climb over the gate to play!!With our permission of course.
Today,I visited the track and boy was I surprised to find that the guys have cleared the top surface dirt and the track surface was perfect!!Hard pact with no dirt! Today 2 other guys came back to further their test from Sunday..he,he...Jump or no jump,who cares????
Jumps should be going in tomorrow.Will take us a day or two to compact and shape it.Expect to start operations by this weekend.
Surface quite tricky as traction is still low even with the track cleaned by the weekend guys....shud be interesting..
Will take some photos in 2 days time after the jumps go in.
Cheers!
Today,I visited the track and boy was I surprised to find that the guys have cleared the top surface dirt and the track surface was perfect!!Hard pact with no dirt! Today 2 other guys came back to further their test from Sunday..he,he...Jump or no jump,who cares????
Jumps should be going in tomorrow.Will take us a day or two to compact and shape it.Expect to start operations by this weekend.
Surface quite tricky as traction is still low even with the track cleaned by the weekend guys....shud be interesting..
Will take some photos in 2 days time after the jumps go in.
Cheers!
11-22-2004, 10:51 AM
#58
Tech Regular
Originally posted by HPC
Danny - U wouldnt believe it.A lot of guys more impatient than u folks.Yesterday,they were willing to climb over the gate to play!!With our permission of course.
Today,I visited the track and boy was I surprised to find that the guys have cleared the top surface dirt and the track surface was perfect!!Hard pact with no dirt! Today 2 other guys came back to further their test from Sunday..he,he...Jump or no jump,who cares????
Jumps should be going in tomorrow.Will take us a day or two to compact and shape it.Expect to start operations by this weekend.
Surface quite tricky as traction is still low even with the track cleaned by the weekend guys....shud be interesting..
Will take some photos in 2 days time after the jumps go in.
Cheers!
Danny - U wouldnt believe it.A lot of guys more impatient than u folks.Yesterday,they were willing to climb over the gate to play!!With our permission of course.
Today,I visited the track and boy was I surprised to find that the guys have cleared the top surface dirt and the track surface was perfect!!Hard pact with no dirt! Today 2 other guys came back to further their test from Sunday..he,he...Jump or no jump,who cares????
Jumps should be going in tomorrow.Will take us a day or two to compact and shape it.Expect to start operations by this weekend.
Surface quite tricky as traction is still low even with the track cleaned by the weekend guys....shud be interesting..
Will take some photos in 2 days time after the jumps go in.
Cheers!
now, i m very curious about your new track. i will try to sneek and peek into your track
11-22-2004, 03:37 PM
#59
GS Cup
HPC,
Good to hear that the track is almost done. As GS Cup is an annual event, we would like the track to be good and ready for the race. I am also concerned about the pit areas for all the racers. Let me know if I need to rent chairs, tables. Can the control stand fit 10 people comfortably? I hope to make this a race to remember for all.
Good to hear that the track is almost done. As GS Cup is an annual event, we would like the track to be good and ready for the race. I am also concerned about the pit areas for all the racers. Let me know if I need to rent chairs, tables. Can the control stand fit 10 people comfortably? I hope to make this a race to remember for all.
11-22-2004, 04:35 PM
#60
don worry jets! we'll not just remember the race we'll also remember u!