RS4 micro / Xray M18
#1
Guest
RS4 micro / Xray M18
Dear ALL,
I wonder if there are many 1/18 racers out there in Klang Valley.
I've seen no one setup a thread for this class....guess I start da ball rolling or shall I say lets start da wind blowing.
Haiyah.....lupa bawak my kamala....sula tangkap gambar keleta micro gua lupa bawak untuk post.....esoklah yah.
Anyway ..... those who like to share your ideas and experience with da gang just pop in a line here.
I wonder if there are many 1/18 racers out there in Klang Valley.
I've seen no one setup a thread for this class....guess I start da ball rolling or shall I say lets start da wind blowing.
Haiyah.....lupa bawak my kamala....sula tangkap gambar keleta micro gua lupa bawak untuk post.....esoklah yah.
Anyway ..... those who like to share your ideas and experience with da gang just pop in a line here.
#2
Tech Apprentice
Any 1/18 Race?
alooooooooo tornado,
yelah i also want to play 1/18 lah, what car u got?
want to go race or not, we play mirolahhhhh
yelah i also want to play 1/18 lah, what car u got?
want to go race or not, we play mirolahhhhh
#3
Guest
Ok .....gua punya bebe see M18. been zipping around for a couple of months at the Atria carpark speedway...indoor carpet every sunday.....now that space tak boleh pakai....so gua sikalang if have time go to subang speedway or glenmarie loh....
#4
i wish i can sell my micro cos got my m18 yesterday
#5
Tech Initiate
My micro...
#6
Guest
Originally posted by rcsabah
i wish i can sell my micro cos got my m18 yesterday
i wish i can sell my micro cos got my m18 yesterday
#7
Guest
Originally posted by Yaw 7211
My micro...
My micro...
#8
Tech Regular
Originally posted by Yaw 7211
My micro...
My micro...
I own a micro for about a year i think. Stop playing it since i broke the stock chasis.
my micro setup,
Grauhpner S300,
6 cells AA size batt,
hpi rear ball differential,
stock rims,
hpi steel dogbone,
lrp quantum micro reverse,
stock reciever,
hitec micro servo,
hpi micro servo dual link,
titanium antenna,
cv rear suspension,
benZ body,
my guru is bodigat and friends from other forum.
#9
mine with
metal uj
one way
ball diff
spring set
bmw body
7cell's AAA
elite motor
futaba electronics
metal uj
one way
ball diff
spring set
bmw body
7cell's AAA
elite motor
futaba electronics
#10
Tech Initiate
Mine is with
Micro heli motor with turbo (equivalent to speed 370, bought from Hobbytech, Amcorpmall)
13T pinion
7.4V Li-poly 2 cell batt (very light, powerful and long duration (1800mah) bought from Hobbytech, AmcorpMall)
Alloy heatsink
Alloy dogbone
Alloy ball diff
Alloy knuckle
This little rat can kick stock 1/10th EP car ass anytime
Micro heli motor with turbo (equivalent to speed 370, bought from Hobbytech, Amcorpmall)
13T pinion
7.4V Li-poly 2 cell batt (very light, powerful and long duration (1800mah) bought from Hobbytech, AmcorpMall)
Alloy heatsink
Alloy dogbone
Alloy ball diff
Alloy knuckle
This little rat can kick stock 1/10th EP car ass anytime
#11
Guest
Originally posted by Yaw 7211
Mine is with
Micro heli motor with turbo (equivalent to speed 370, bought from Hobbytech, Amcorpmall)
13T pinion
7.4V Li-poly 2 cell batt (very light, powerful and long duration (1800mah) bought from Hobbytech, AmcorpMall)
Alloy heatsink
Alloy dogbone
Alloy ball diff
Alloy knuckle
This little rat can kick stock 1/10th EP car ass anytime
Mine is with
Micro heli motor with turbo (equivalent to speed 370, bought from Hobbytech, Amcorpmall)
13T pinion
7.4V Li-poly 2 cell batt (very light, powerful and long duration (1800mah) bought from Hobbytech, AmcorpMall)
Alloy heatsink
Alloy dogbone
Alloy ball diff
Alloy knuckle
This little rat can kick stock 1/10th EP car ass anytime
Last edited by tornado; 05-26-2004 at 07:12 PM.
#12
Tech Initiate
#13
Guest
Wot do you mean when you mentioned that ur motor comes with turbo ? All I know is that gp cars would have turbo by using a turbo engine...but a turbo ep motor..something new. care to share ?
#14
Hi...
Mine equipped with
Team Motek EXO 150mm Graphite pan chassis
HPI Rear Ball Diff
HPI Front One way with alum casing
Hitec HS81MGBB servo with HPI servo saver (with vertical alloy mount)
Futaba MC230CR ESC
Rear WE 1/12 shock
8 cell 1350nimh sony brick cell
HPI steel universal
Deans connector all round
Mabuchi 6s 300 motor (use for 1/10 QD car)
13T alloy pinion
Mercedes CLK DTM bodyshell custom painted
and lots of other parts.....
Mine equipped with
Team Motek EXO 150mm Graphite pan chassis
HPI Rear Ball Diff
HPI Front One way with alum casing
Hitec HS81MGBB servo with HPI servo saver (with vertical alloy mount)
Futaba MC230CR ESC
Rear WE 1/12 shock
8 cell 1350nimh sony brick cell
HPI steel universal
Deans connector all round
Mabuchi 6s 300 motor (use for 1/10 QD car)
13T alloy pinion
Mercedes CLK DTM bodyshell custom painted
and lots of other parts.....
#15
bodigat your car must be dam fast
just finish building up my m18 and retired my micro
still standard hope more option to be release and install$$ staff
just finish building up my m18 and retired my micro
still standard hope more option to be release and install$$ staff