1. 1 team 3 drivers (no more no less - all are welcome)
2. Chassis: TAMIYA TT01 Truck Racing chasis
- all Tamiya TT01 option part is allowed
- option part from 3rd party brand also allowed
3. Diff & Bevel gear
Standard Bevel gear and option diff gear are allowed
Front diff lock is not allowed (Diff oil, putty is allowed, but diff must not lock)
Organizer will do diff checking before race start
4. BodyShell:
-Tamiya Truck Racing Bodyshell Team Hahn, Reinert & BUggyra
-Bitty Design Iron Truck
-Montech truck bodyshell
bodyset must be applied. If any chance the truck head peel off, the truck must
go to the pit stop to attach back the bodyshell.
Add in light is allowed
Additional part that related to aerodynamic or reduce weight, is not allowed
Additional hole for reduce weight or aerodynamic is not allowed
5. FDR: >= 7.21 (standard spur gears from box 61, pinion 22)
-hard coated pinion is allowed
6. ESC: Open ESC (must be in blinky mode)-organizer will do blinky checking. Please standy prog card if needed)
6. Motor: Open APPROVED 17.5 brushless motor (ROAR, BRCA, IFMAR, etc)
-motor timing max 2600kv
7. Tires: Tamiya truck rubber tyre
-rim is open to all type and brand (but must be suitable for Tamiya truck rubber tyre)
No limit
Insert is not allowed
8. Batteries: Lipo/LiHV 7.4v/7.6v, No limit.
9. Truck weight: 1550g
-after weight checking, truck to be impound
-after endurance finish, weigh will be check again
10. All cars will be checked and impounded before race (Time TBA)
-ratio checking
-motor and ESC checking
-weight check
-above rules comply
11. Draw lots will be done for team starting position (Maximum 14 teams)
12. Driver change every 30 minutes for the first 3 hours according to order registered on race day.
13. Last hour Free Flow, can change anytime any driver.
14. Battery must be change every 30 minutes. During changing the battery, all racer need to take off the bodyshell first.(total bodyshell been take off)