Buy/Sell/Trade
#4321
Tech Rookie
Hey every one I NEED help I have a traxxas T-MAXX pull start an I have not been able to the thing started since I got it......I got nitro for it......I pull an pull an pull an still dead Nothin an I don't know if Itz the glow plug this is the first nitro truck I have every owned so I kinda need to know everything I can.....
#4323
Tech Elite
iTrader: (37)
XRay T1 4WD TC Rolling Chassis!!!
XRay T1 4WD Touring Car rolling chassis with original ball-joint suspension. Upgrades include front gear diff, infinitely-adjustable front sway bar, front belt tensioner, and aluminum shocks with low-profile front tower to fit under any body. This car won the USGT class in Topeka last summer, and TQ'ed at my last race in Omaha, too! This car is old and used, but still competitive in classes where it can meet the minimum weight, like VTA, USGT, and Topeka's Nastruck class.
Spares include suspension uprights, arms, shocks, ball diff, spool, and belts. I'll also throw in the following freebies to get you going: my old, ugly USGT body, 2s LiPo battery, and TC slick practice tires (shown in the photos). If you want to run in NasTruck, I'll swap out the body and tires for my old Nastruck body and spec tires.
$75 for the lot! I can deliver to FastLane or Dee&Mee on Sundays, depending on race schedule.
Spares include suspension uprights, arms, shocks, ball diff, spool, and belts. I'll also throw in the following freebies to get you going: my old, ugly USGT body, 2s LiPo battery, and TC slick practice tires (shown in the photos). If you want to run in NasTruck, I'll swap out the body and tires for my old Nastruck body and spec tires.
$75 for the lot! I can deliver to FastLane or Dee&Mee on Sundays, depending on race schedule.
Last edited by howardcano; 04-13-2016 at 03:05 AM.
#4324
Tech Apprentice
STL area
Looking for a SC truck roller and a buggy roller(electronics in it is fine too).
Might be interested in a carpet car as well(entry level).
I will probably be at Smac Track on Saturday if anyone wants to bring something up. Would be interested in anything for sale really, radios, chargers, etc.
I might check out ProLevel on Sunday as well.
Let me know if you are gonna bring something up I may want.
Looking for a SC truck roller and a buggy roller(electronics in it is fine too).
Might be interested in a carpet car as well(entry level).
I will probably be at Smac Track on Saturday if anyone wants to bring something up. Would be interested in anything for sale really, radios, chargers, etc.
I might check out ProLevel on Sunday as well.
Let me know if you are gonna bring something up I may want.
#4325
Is anyone looking to sell out.
...
Last edited by rccars4scott; 02-10-2016 at 06:57 AM.
#4326
Looking for race ready or ARR B5M
#4327
My son and I are looking to get back into RC racing after a five year break for me so we need just about everything to get started again. I would really like a turn key operation if anyone is looking to sell out. He is most interested in oval and off road so if anyone has decided to call it quits, please give me a call or text at 618-334-3123.
Last edited by gdudley; 01-31-2016 at 09:12 PM.
#4328
I could probably hook you up with Spectrum transmitters/receivers, speed passion reventon escs, motors, lipo batteries, extra tires/wheels, and an associated stadium truck or possible a B5M. Give me a call and depending on what all you would like, I can give you pricing. I am not selling out. I just have to make some room. Cell # is (785) 220-4084. Ask for Sean.
#4329
.
Last edited by Astro; 02-12-2016 at 07:30 AM.
#4330
kaboom!
Last edited by Race Dad; 02-05-2016 at 04:13 PM.
#4332
Serpent SRX2 w/Upgrades
Selling with no electronics (roller only)
Titanium screw kit
Titanium turnbuckles
Gear diff installed - also comes with ball diff
TiN coated shock shafts
Machined shock Pistons
Upgraded o-rings (zero leaking)
New bleeder screws
Fairly new bearings
Slide drive setup
Alum bulkhead
Alum rear hubs
Alum servo mounts
Alum steering rack and arms (arms not installed yet)
Brass rear hinge pin holder (not installed)
Spare arms
Spare rod ends
Solid blue body
Custom painted body comes with it also has not been used at all. Still needs body mount holes put in it. See last picture for this body
2 new serpent wings
2 sets of yellow serpent front wheels
$220 shipped to your door- Cheaper locally. You can text me 785-861-5285
Titanium screw kit
Titanium turnbuckles
Gear diff installed - also comes with ball diff
TiN coated shock shafts
Machined shock Pistons
Upgraded o-rings (zero leaking)
New bleeder screws
Fairly new bearings
Slide drive setup
Alum bulkhead
Alum rear hubs
Alum servo mounts
Alum steering rack and arms (arms not installed yet)
Brass rear hinge pin holder (not installed)
Spare arms
Spare rod ends
Solid blue body
Custom painted body comes with it also has not been used at all. Still needs body mount holes put in it. See last picture for this body
2 new serpent wings
2 sets of yellow serpent front wheels
$220 shipped to your door- Cheaper locally. You can text me 785-861-5285
#4334
Removed
Last edited by Race Dad; 02-08-2016 at 03:16 PM. Reason: Removed
#4335
Still Looking for Buy Out
Still looking for someone looking to sell complete race operation. See below.
My son and I are looking to get back into RC racing after a five year break for me so we need just about everything to get started again. I would really like a turn key operation if anyone is looking to sell out. He is most interested in oval and off road so if anyone has decided to call it quits, please give me a call or text at 618-334-3123.
My son and I are looking to get back into RC racing after a five year break for me so we need just about everything to get started again. I would really like a turn key operation if anyone is looking to sell out. He is most interested in oval and off road so if anyone has decided to call it quits, please give me a call or text at 618-334-3123.