Jake's RC PRO-AM indoor OVAL
 

I finished the oval track tonight! It looks good, and we will be ready to start oval racing this Sunday, 2pm. We are new to oval racing so I would appreciate any input and advice to what classes and rules to abide by. Thankyou and hope to have fun trying my hand at oval racing for the very first time in my life. Cya soon guys!

What are the oval dimensions? Will this only be an Electric track or will there be 1/10 nitor allowed? IE sprints or truck syle EDM.

Rule wise: Electric I would adopt something close to Checkered Flag. Nitro follow the NSCS rules hands down.

Is the track large enough for L8M 1/8 scale Latemodels?:cool

Thanks

Phil

ELECTRIC!!! 1OTH SCALE!!!

Jake's R/C Pro-Am is now running oval on Sunday's at 2pm. Starting this Sunday February 15th until Checkered Flag opens this Spring. Same rules as Chered Flag except side dams are allowed in late model classes. It's high grip and Losi pinks work best along with Panther Clays or Proline M3 compounds. Doors open at Noon but we are usually there earlier. 1212 S. Kansas Ave., Topeka, KS.

$10 for the first class and $5 for each additional.

I have two threads here so I'll post in both for a while. OVAL is back on Sundays at Jake's R/C Pro-Am. 1212 S. Kansas Ave. Topeka Kansas.Doors open at noon and races start at 2pm. We already had our first race today and it was a great success.
Track is 42X65 high grip clay. Losi pink compound/Proline M3/or Panther Clays work best. Medium to bald tread.

Jake’s RC Pro-Am Oval Rules

NOVICE
This class is intended for racers of all ages. This is a great class for the beginner or any racer that feels they aren’t ready to move up to the other classes. Racers that enter this class may race in this class on any given race day but once a Novice racer decides to move up and race another class they cannot return to the Novice class.
1: Any 2WD 1/10th scale car or truck.
2: Truck, EDM, Sprint or Dirt Late Model bodies only.
3: 2WD transmission only
4: 6 cell NICAD, NIMH or 2 Cell Lithium batteries.
5: Any 27 turn Stock motor or 17.5 Brushless motor
6: Tires Rubber Only
7: NO Side Dams in this class
8: All vehicles must follow rules pertaining to witch body style they are running.

SLASH SPEC
1. Must be bone stock with stock electronics.
2. Any transmitter and receiver allowed.
3. RPM axle housings on all four corners are the only hop-up allowed.
4. Tires and rest of the truck must remain stock.
5. Side dams are allowed. Maximum of 4 inches above roof line and maximum length of 15 inches.

Modified Truck
1: Any 2WD 10th scale Truck chassis only. No modifications allowed to chassis.
2: Suspension may be modified.
3: Only truck bodies allowed. . (No Side Dams Allowed)
4: 2” maximum spoiler allowed.
5: Must run Truck arms, wheels and tires.
6: Tires Rubber or Foams must run truck style foams.
7: Any motor brushed or brushless.
8: 2WD transmission only.
9: 6 cell NICAD, NIMH or 2 Cell Lithium batteries.
10: No motor limit.
11. Maximum Width 13”
12: Maximum Wheel Base 11.5”

Street Stock
1. 2wd 10th scale chassis
2. 13.5 sensored or 19 turn brushed
3. Rubber tires
4. Any non-foreign car body, i.e. Ford, Chevy, Mopar, etc....
5. No side dams, Spoilers must be attached to body, 2 inch max height

Eastcoast Dirt Modified (EDM)
1: Any 2WD 10th scale chassis.
2: Modifications can be made to the chassis and suspension.
3: Must run any style of a Dirt Modified body.7” maximum height and 21” maximum length. 2” spoiler allowed from deck lid.
4: SIDE DAMS allowed maximum length 15” height 8” off the bottom of body. Side dams can’t exceed NO longer than 2” from back of body. Side dams must be mounted on the left hand side of car ONLY.
5: Must run Buggy arm, wheels and tires.
6: 6 cell NICAD, NIMH or 2 Cell Lithium batteries.
7: 2WD transmission only.
8: Any motor brushed or brushless.
9: Tires Rubber or Foams buggy style.
10: Maximum Width 10.25”
11: Maximum Wheel Base 11.25”

2WD Dirt Late Model
1: Any 2WD 10th scale chassis.
2: Modifications can be made to the chassis and suspension.
3: Any manufactured 1/10th scale Dirt Late Model body. Wheel wells must be cut out and must cover the tops of all tires. Rear of body may be cut out. 2” spoiler allowed from deck lid. Spoilers may have side panels but must be attached to the spoiler and body with the maximum size being 2”x 2” Leading edge of side panels must be angled or rounded.
4: SIDE DAMS allowed maximum length 15” height 8” off the bottom of body. Side dams can’t exceed NO longer than 2” from back of body. Side dams must be mounted on the left hand side of car ONLY.
5: 6 cell NICAD, NIMH or 2Cell Lithium batteries.
6: Must run Buggy arms, wheels and tires.
7: Tires Rubber or Foams buggy style.
8: 2WD transmission only.
9: Any motor brushed or brushless.
10: Maximum Width 10.25”
11: Maximum Wheel Base 11.25”

Sprint Car
1: Any 2WD 10th scale chassis.
2: Modifications can be made to the chassis and suspension.
3: Sprint car bodies only. All cars must have a top wing mounted over driver’s compartment. Wing measurements Maximum: Center 6”x 6” Right panel 3” x 7” Left Panel 4.5”x 7” Front wings allowed. Maximum measurements: Center 3” x 2.5” Side Panels 1” high x 3” long.
4: Must run Buggy arms, tires, and wheels.
5: 6 cell NICAD, NIMH or 2 Cell Lithium batteries.
6: Any 2WD transmission or Direct Drive.
7: Any motor brushed or brushless.
8: Tires Rubber or Foams buggy style
10: Maximum Width 10.25”
11: Maximum Wheel Base 11.25”

4WD Dirt Late Model
1: Any 4WD single motor 10th scale chassis.
2: Modifications can be made to chassis.
3: Any manufactured 1/10th scale Dirt Late Model body. Wheel wells must be cut out and must cover the tops of all tires. Rear of body may be cut out. 2” spoiler allowed from deck lid. Spoilers may have side panels but must be attached to the spoiler and body with the maximum size being 2”x 2” Leading edge of side panels must be angled or rounded.
4: SIDE DAMS allowed maximum length 15” height 8” off the bottom of body. Side dams can’t exceed NO longer than 2” from back of body. Side dams must be mounted on the left hand side of car ONLY.
5: Any drive or transmission.
6: 6 cell NICAD, NIMH or 2 Cell Lithium batteries.
7: Any motor Brushed or Brushless.
8: Tires Rubber or Foams.
9: This class is for any manufactured 1/10th scale 4WD Car. No Trucks allowed.
10: Maximum Width 10.25”
11: Maximum Wheel Base 11.25”

Insane Outlaw
Only one rule: Must be electric 10th scale.

Open MINI's
All mini's run together until there's enough to separate into classes.

Well, I would call the first oval race a great success. See everyone next Sunday.

.

Are foams allowed to be used there?

Yes but rubber works better here. It's clay. Everything you need to know is in the rules. Thanx. See ya soon.

how about some pictures of that dirt oval ;)

How bout you just picture it.:lol: JK I didn't take any but I will this Sunday.

What do you need pic's for ? it's a dirt circle ! :lol:

Nobody pulled your string, puppethead.:eek:

I got your puppet head, boy :lol:

so, you tie a string around it to make it move dave? that's weird... Don't keep that string wrapped around it to long, I think it would eventually fall off. Then we would have to start calling you davina! ha ha. huh oh, sounds like a new name for super Davina? ha ha

On a more serious note. I have to admit,, OVAL WAS A BLAST! I don't think I ever used my throttle at full throttle that much in my whole life. I was alot of balls to the wall cat and mouse! I can't wait to get some oval bodies painted up! Thanks everyone for coming to race oval this sunday!

I added a Street Stock class and a Slash class to the oval rules. Check out the revised rules above.