Slash Racing at Hobby Hangout on Thursday
05-03-2009, 08:45 PM
#16
Already have one been running at PT and in the GCS series. Number 2 in points right now.
05-03-2009, 08:52 PM
#17
05-04-2009, 02:39 AM
#18
Nothing is wrong with it, just everyone else has one of those generic RTR bodys...
turtle, the unpainted ones are $30 plus paint and God knows i could never paint a good looking body... lol Ill splurge and get the Amsoil one, theyre on back order right now anyways, so ill have to run that ugly body...
you going to jump in the slash class turtle?
Alex
turtle, the unpainted ones are $30 plus paint and God knows i could never paint a good looking body... lol Ill splurge and get the Amsoil one, theyre on back order right now anyways, so ill have to run that ugly body...
you going to jump in the slash class turtle?
Alex
05-04-2009, 04:50 AM
#19
pics
05-04-2009, 05:31 AM
#20
Can't do any weekday racing. Don't get off before 6 and it's an hour drive down there. If you guys would organize something for Saturdays with a set schedule I could make it. I say run the Slashes and onroad on the same night just move the jumps between heats that way you have turnmarshalls for both. Just an idea.
Jim: I got a buggy on the way get yours dusted off and lets get this class going again.
Jim: I got a buggy on the way get yours dusted off and lets get this class going again.
05-04-2009, 03:16 PM
#21
Trying to find the money to buy me one
hope to sell some thing by thursday if not hit a bank. will race for food
hope to sell some thing by thursday if not hit a bank. will race for food
05-04-2009, 03:38 PM
#22
get alex to buy you one
05-04-2009, 03:55 PM
#23
Jim if I had that kind of monney lying around he'd have one and craig too.... As much of a butt hole they both TRY to be they're still nice guys... But unfortunately I went for broke on the 8T-E.... Thats why I'm settling on that TC3 from Craig instead of a new TC5... I figured for the price I built the TC5 I could have the TC3 running 21.5 rubber vintage class and a slash.... So I weighed my options and I went for both....
So we dont need a lipo cut off on these??
I say thursday night the ones that are planning on racing the slash's sit down and come up with a set of rules...
Like danny said 100% stock out of the box slash. Only legal changes that can be made are rx/tx, metal shock caps, and any weight shock oil... Thats it anything else is DQed....
Alex
So we dont need a lipo cut off on these??
I say thursday night the ones that are planning on racing the slash's sit down and come up with a set of rules...
Like danny said 100% stock out of the box slash. Only legal changes that can be made are rx/tx, metal shock caps, and any weight shock oil... Thats it anything else is DQed....
Alex
05-04-2009, 04:28 PM
#24
05-04-2009, 04:47 PM
#25
Why not just use the same rules everyone else does?
Originally Posted by GCS Rules
Slash:
1. All trucks must use the factory Traxxas body, or the Pro-line slash specific models.
2. No modifications may be made to the chassis system. Vehicle must be raced in its stock form. Original Traxxas replacement parts are allowed for broken or worn parts.
3. Both the front and rear suspension systems must remain in stock form. Original Traxxas parts only. No hop up replacements. Rpm rear hub carriers are allowed.
4. Original 5805 Traxxas kit white shock springs may be used. Shock caps may be replaced with alum shock cap 2667 and Traxxas turnbuckles 3139X, 3139A, 3737, and 3737A may be used.
5. No modification may be made to the steering system.
6. Any manufacturer’s bearings may be used.
7. Original RTR kit electronics, speed control and servos, only. You may install any different receiver you like.
8. This class is restricted to a stock Traxxas titan 12t motor
9. This class is limited to any 7.2v NiCad, NiMah made up of 6 sub c size cells or lipo 7.4v 2c battery packs.
10. Original Traxxas slash 2.2” wheel only.
11. Original Traxxas 2.2” tires only.
12. Only the original Traxxas drive train may be used. No aftermarket or hop up replacement drive components may be installed. Traxxas steel planetary gear differential only. Any of the three Traxxas spur gears may be used. Any pinion gear that mounts without modifications needed may be used. Ball diffs are not allowed.
13. All trucks must weigh no less than 4.75 pounds race ready.
1. All trucks must use the factory Traxxas body, or the Pro-line slash specific models.
2. No modifications may be made to the chassis system. Vehicle must be raced in its stock form. Original Traxxas replacement parts are allowed for broken or worn parts.
3. Both the front and rear suspension systems must remain in stock form. Original Traxxas parts only. No hop up replacements. Rpm rear hub carriers are allowed.
4. Original 5805 Traxxas kit white shock springs may be used. Shock caps may be replaced with alum shock cap 2667 and Traxxas turnbuckles 3139X, 3139A, 3737, and 3737A may be used.
5. No modification may be made to the steering system.
6. Any manufacturer’s bearings may be used.
7. Original RTR kit electronics, speed control and servos, only. You may install any different receiver you like.
8. This class is restricted to a stock Traxxas titan 12t motor
9. This class is limited to any 7.2v NiCad, NiMah made up of 6 sub c size cells or lipo 7.4v 2c battery packs.
10. Original Traxxas slash 2.2” wheel only.
11. Original Traxxas 2.2” tires only.
12. Only the original Traxxas drive train may be used. No aftermarket or hop up replacement drive components may be installed. Traxxas steel planetary gear differential only. Any of the three Traxxas spur gears may be used. Any pinion gear that mounts without modifications needed may be used. Ball diffs are not allowed.
13. All trucks must weigh no less than 4.75 pounds race ready.
05-04-2009, 05:09 PM
#26
Slash:
NO HOP UP PARTS OF ANY KIND
1. All trucks must use the factory Traxxas body, or the Pro-line slash specific models.
2. No modifications may be made to the chassis system. Vehicle must be raced in its stock form. Original Traxxas replacement parts are allowed for broken or worn parts.
3. Both the front and rear suspension systems must remain in stock form. Original Traxxas parts only..
4. Shock caps may be replaced with alum shock cap 2667
5. No modification may be made to the steering system.
6. Any manufacturer’s bearings may be used.
7. Original RTR kit electronics, speed control and servos, only. You may install any different receiver you like.
8. This class is restricted to a stock Traxxas titan 12t motor
9. This class is limited to any 7.2v NiCad, NiMah made up of 6 sub c size cells or lipo 7.4v 2c battery packs.
10. Original Traxxas slash 2.2” wheel only.
11. Original Traxxas 2.2” tires only.
12. Only the original Traxxas drive train may be used. No aftermarket or hop up replacement drive components may be installed. Traxxas steel planetary gear differential only. Any of the three Traxxas spur gears may be used. Any pinion gear that mounts without modifications needed may be used. Ball diffs are not allowed.
13. All trucks must weigh no less than 4.75 pounds race ready.
Thats better..
Alex
NO HOP UP PARTS OF ANY KIND
1. All trucks must use the factory Traxxas body, or the Pro-line slash specific models.
2. No modifications may be made to the chassis system. Vehicle must be raced in its stock form. Original Traxxas replacement parts are allowed for broken or worn parts.
3. Both the front and rear suspension systems must remain in stock form. Original Traxxas parts only..
4. Shock caps may be replaced with alum shock cap 2667
5. No modification may be made to the steering system.
6. Any manufacturer’s bearings may be used.
7. Original RTR kit electronics, speed control and servos, only. You may install any different receiver you like.
8. This class is restricted to a stock Traxxas titan 12t motor
9. This class is limited to any 7.2v NiCad, NiMah made up of 6 sub c size cells or lipo 7.4v 2c battery packs.
10. Original Traxxas slash 2.2” wheel only.
11. Original Traxxas 2.2” tires only.
12. Only the original Traxxas drive train may be used. No aftermarket or hop up replacement drive components may be installed. Traxxas steel planetary gear differential only. Any of the three Traxxas spur gears may be used. Any pinion gear that mounts without modifications needed may be used. Ball diffs are not allowed.
13. All trucks must weigh no less than 4.75 pounds race ready.
Thats better..
Alex
05-04-2009, 05:43 PM
#27
guess I'm gone to sell a kidney
05-04-2009, 06:03 PM
#28
i would be better on you to get a kidney from alex. he is younger and will have a quicker recovery time..
05-04-2009, 06:08 PM
#29
Why is Jim hatin on me? Gah... No slack from this guy...
oh and Danny I'm all about the slash's because THEYRE CHEAP!
Alex
oh and Danny I'm all about the slash's because THEYRE CHEAP!
Alex
05-04-2009, 08:15 PM
#30
no mater how many times i say it my wallet is still empty
