TL_XXX-S_racer

Hey guys, I just wanted to know what foams you guys are running for 1/10th scale on-road. I was going to run the TRC Cyan and Magenta with the black spoked rims. Does anyone know where I can buy them or if they're still being sold. If not what else is there for me to use?

Thanks,
Chris

BritRacer

I think a good start for stock/19t would be the jaco 2 stage wraps.

If you are running mod, I would suggest taking some jaco dbl pink / dbl pink Org also.

Take plenty! Practice, club race, quals, mains, thats a lot of tires

TL_XXX-S_racer

Can you give me the link to TRC and the JACO site? Im running stock.
Ya im probably going to bring more than 4 sets, but I can always get more there if i need too.

Thanks,
Chris

Andrew Gray

iTrader: (4)

www.jacoracing.net

Rob Phillips

iTrader: (6)

check out speedtechrc.com or kthobbies.com for Jacos or Parmas. They have very good prices and excellent customer service to boot.

jbenthobbies

iTrader: (1)

you might want to give BSR tires a try. They have a true durometer. Try double pink in the rear and double pink with orange in the front.

dodgeguy

iTrader: (208)

I believe BSR is Jaco wheels and rubber.

How does the TRC foams compare to Jaco/BSR with wheel durability?

Korey Harbke

iTrader: (13)

BSR uses a different foam I think.... They do use Jaco wheels though. I feel jaco rims are better. They are slightly larger in diameter, and stiffer. The foam on the TRC runs a bit soft.... not really good for super high traction conditions in my opinion.

-Korey

Bob Barry

iTrader: (22)

Wow I actually like Parma's better than all the rest right now. They just seem the most consistant. Wraps will be good for a run then bad then good again.