how do i set up a vega factory esc
01-20-2006, 12:53 PM
#1
Tech Rookie
Thread Starter
how do i set up a vega factory esc
my mate as got a vega factory esc how do i set it ? cheers
01-21-2006, 01:18 AM
#2
Tech Elite
Join Date: Mar 2004
Location: MOOD;; feeling good not racing ,saving shed loads of money,lovely Tan i have aswell
Posts: 4,762
Initial set-up
Connect motor and battery to your "Factory" ESC.
Turn on your transmitter and set all the throttle rates to 100%.
Turn on the ESC at the switch.
Press the set button once. The LED is on. Do not move the throttle on your transmitter.
After a couple of seconds the LED turns off (neutral saved).
During the next 3-4secs. move transmitter to full throttle, then full brake and then back to neutral.
Now wait for 4 secs. while the ESC saves the radio settings.
3 LED flashes, signals that the settings are saved.
The ESC is now set to your transmitter.
if there` smoke turn it off & buy a MRT
Connect motor and battery to your "Factory" ESC.
Turn on your transmitter and set all the throttle rates to 100%.
Turn on the ESC at the switch.
Press the set button once. The LED is on. Do not move the throttle on your transmitter.
After a couple of seconds the LED turns off (neutral saved).
During the next 3-4secs. move transmitter to full throttle, then full brake and then back to neutral.
Now wait for 4 secs. while the ESC saves the radio settings.
3 LED flashes, signals that the settings are saved.
The ESC is now set to your transmitter.
if there` smoke turn it off & buy a MRT
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
