R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   Setup System Question (https://www.rctech.net/forum/electric-road/97771-setup-system-question.html)

James605 01-15-2006 05:57 PM

Setup System Question
 
Juts got a hudy setup system but really dont know the right way to use it, Do you have to have the setup board to use it, and can someone "teach" explain how to use it. Any info would be appreciated. Thank you
James

R/C Anonymous 01-15-2006 06:02 PM

no u dont need the setup board...a flat surface works fine( flat countertop, mirror, piece of glass,etc.)

James605 01-15-2006 06:06 PM

ok i have a glass board can you tell me "how" to use it?

RickyIS300 01-16-2006 12:16 AM

Mount the pieces on your car but make sure your car is tweaked properly first and the ride height is where you want it to be. Start out with 2 degree negative front and rear camber, 3 degree toe-in for the rear and 1 or 2 degree toe out for the front. These are basic setup and you can make small changes from this point on. Tweak and ride height are both very important and they should be done first before the camber and toe adjustments.


All times are GMT -7. It is currently 05:50 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.