R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   Tamiya Euro Truck Class (https://www.rctech.net/forum/electric-road/970907-tamiya-euro-truck-class.html)

TT_Vert 01-28-2019 08:54 AM

True. I did race in the mini class years ago and I think I erroneously compared the two. With that I literally did not brake, just a tad of drag brake if i recall if I ever needed to slow down. I tuned steering w/ the amount of front sauce, aside from that I did little tuning on that and it was a blast. Traction rolling on the same two corners EVERY lap on the other hand...... I even took the body off and I could get it to traction roll so I knew the CG wasn't the entire story here. Watching the others here at my track they certainly are not having to finesse them around the corners like mine has to be so I hope that front diff is where it's att. Really, it's the only thing I have left (Aside maybe from the tires). I did move front tires to rear (removed all sauce) and it didn't make much difference. BTW, I was only saucing the rear tire in hopes of causing an understeer which obviously has failed! As far as driving, like the mini class I assume carrying speed is paramount to good lap times w/ these things. But it also seems (For my current setup at least) to be a VERY fine line between rolling and carrying any semblance of speed through a corner.

Originally Posted by DaSilva3525 (Post 15384229)
I'm using a tiny bit of Tamiya AW Silver grease, just put some on my finger and spread it over the diff gears individually and assemble

OH wow, so your front diff is nearly open.


Hopscotch 01-28-2019 09:33 PM

Originally Posted by Scionara05 (Post 15384116)
Well TVs happened yesterday at RC car world and the cab over won the a and the b main with the fox in 2 and 3 for both mains.

Chris was really hooked up for the amain, I chased him all day with him having the fastest hot lap and me having the second fastest. The two fox behind him along with me just ran into some bad luck. Al that won the Bmain should have been in the Amain but I was happy to see him grab the win in the B. Well deserved.

cpal 01-30-2019 10:34 AM

Originally Posted by Jamie Hanson (Post 15384147)
Who were the TCS winners?

I won GT-2 and Euro truck

Hopscotch 01-30-2019 12:02 PM

They were supposed to post the winners up on their FB page but I don't know what happened.

ammdrew 02-05-2019 09:14 AM

ammdrew 02-05-2019 09:14 AM

peter george 02-05-2019 05:18 PM

Silly question , is tto1 and tto1E both allowed in this class ? Got one but it came with Han body but tto1 without the top deck . Itís a tto1

Nerobro 02-05-2019 08:30 PM

No, it has to be the TT01E. There's more to the "E" package than just the top deck. There's a whole tree of stiffer plastic.

peter george 02-05-2019 09:54 PM

Wow thanks

Nerobro 02-06-2019 12:47 AM

That said, if you bought a euro truck set.... There is no way it came without the full TT01e parts... How did you aquire this set?

mrreet2001 02-06-2019 06:46 AM

What servos are everyone running?

Hopscotch 02-06-2019 07:07 AM

Originally Posted by mrreet2001 (Post 15390241)
What servos are everyone running?

usually something slower to help the truck not tip over.

Nerobro 02-06-2019 07:17 AM

I had a Turnigy D99 servo in there, but I swapped for PowerHD LF-13hd. I find faster is better... if I go with a slow servo I end up with wobbles coming out of every corner.

MantisWorx 02-10-2019 03:35 AM

F N CUDA 02-12-2019 10:47 AM

Had to give it a go, diggin this body.https://cimg2.ibsrv.net/gimg/www.rct...e0d6168362.jpg

All times are GMT -7. It is currently 09:28 PM.

Powered By: vBulletin v3.9.3.6
Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.