Intermittent Reverse
#1
Intermittent Reverse
Greetings,
Using a Flysky GT-3C and the reverse function is exhibiting strange behavior.
The car brakes fine at speed, every time I attempt to brake it does brake, but...
When I try to reverse it doesn't always do it. Sometimes it reverses immediately, and sometimes it doesn't reverse at all until I go forward, stop, wait 3-5 seconds, then it will reverse.
Sometimes when I barely touch the reverse and release the trigger, the car will slowly reverse for a few feet even while my fingers if off the trigger.
Any information would be greatly appreciated!
Gunnar
Using a Flysky GT-3C and the reverse function is exhibiting strange behavior.
The car brakes fine at speed, every time I attempt to brake it does brake, but...
When I try to reverse it doesn't always do it. Sometimes it reverses immediately, and sometimes it doesn't reverse at all until I go forward, stop, wait 3-5 seconds, then it will reverse.
Sometimes when I barely touch the reverse and release the trigger, the car will slowly reverse for a few feet even while my fingers if off the trigger.
Any information would be greatly appreciated!
Gunnar
#2
I use the Flysky GT3Cs. There seems to be some software glitches that require fiddling with the channel 2 end points and ch2 exponential settings. I just adjusted my ch2 exponential until the rolling in reverse stopped, I think around 55. I also used hacked versions of the Flysky GT3C and that solves the issue. You can send your transmitter to rcaddict and I think it is like $30 to have the software flashed for a better version and you have a lot more functions available also.