Team CRC Gen X 10 R/T
#181
#182
Tech Master
iTrader: (15)
I Received a 96t Spur. If I have to buy pinions I can surely buy different spurs if needed. I will be running a Reedy Sonic 540-M3 Short Stack 1S Spec Brushless Motor (17.5T) #ASC269 and the track is Medium size the current GTR's are running 12.5 to 13.5 Second laps.
https://www.youtube.com/watch?time_c...&v=8YT6boFJOrM
Thanks
#184
So, old_dude's gearing would work out to be about a 40.5T pinion with a 96T spur.
I am running 40-42T pinions with a 96T spur for all my carpet racing using a Team Scream The One 17.5. Depending on the pinion used, the rollout is approximately 81-85 with the CRC WGT-R tire (62mm diameter).
Did put a Yeah Racing 30x30mm fan (#YA-0180) on one car with their adjustable Heat Sink Fan Mount (#YA-0328GM). Have it nicely parked above the TS motor in the pod. Really good fit.
Bill
I am running 40-42T pinions with a 96T spur for all my carpet racing using a Team Scream The One 17.5. Depending on the pinion used, the rollout is approximately 81-85 with the CRC WGT-R tire (62mm diameter).
Did put a Yeah Racing 30x30mm fan (#YA-0180) on one car with their adjustable Heat Sink Fan Mount (#YA-0328GM). Have it nicely parked above the TS motor in the pod. Really good fit.
Bill
Last edited by Still Bill; 05-30-2017 at 12:56 PM.
#185
So, old_dude's gearing would work out to be about a 40.5T pinion with a 96T spur.
I am running 40-42T pinions with a 96 spur for all my carpet racing using a Team Scream The One 17.5.
Did put a Yeah Racing 30x30mm fan (#YA-0180) on one car with their adjustable Heat Sink Fan Mount (#YA-0328GM). Have it nicely parked above the TS motor in the pod. Really good fit.
Bill
I am running 40-42T pinions with a 96 spur for all my carpet racing using a Team Scream The One 17.5.
Did put a Yeah Racing 30x30mm fan (#YA-0180) on one car with their adjustable Heat Sink Fan Mount (#YA-0328GM). Have it nicely parked above the TS motor in the pod. Really good fit.
Bill
My car did feel pretty good for it's first outing. I ran 10.9's consistently by the end of the day on an 80 x 40 black carpet track with a subfloor. I believe the real fast guys were in the 10.3 - 10.4 range at the last big race so I'll be making some minor setup changes and playing with different things this summer.
Last edited by MUDVAYNE; 05-30-2017 at 07:34 AM.
#186
Tech Champion
iTrader: (17)
I Received a 96t Spur. If I have to buy pinions I can surely buy different spurs if needed. I will be running a Reedy Sonic 540-M3 Short Stack 1S Spec Brushless Motor (17.5T) #ASC269 and the track is Medium size the current GTR's are running 12.5 to 13.5 Second laps.
https://www.youtube.com/watch?time_c...&v=8YT6boFJOrM
Thanks
https://www.youtube.com/watch?time_c...&v=8YT6boFJOrM
Thanks
(96/.64) * .48 = 72
#187
The setup I ran in Snowbirds is the same setup I have run pretty much everywhere:
- .45 1/10th front springs, kingpin almost touching the rim
- Mid track width in front
- 3/4 degree of camber
- 10 degree blocks (adjust shims as needed. Start all back, if car diffs out, start putting them forward one at a time until it stops)
- White center spring, stock shock oil
-.45 side springs, just touching, tweak from there
- 7k in the tubes
-very little rear droop. just enough to tell the pod is drooping
-200mm rear track width
-Battery in line to the front
-Speed control mounted behind battery, receiver in front of the battery
-Protoform GT body (when using this body, I use the #1757 carbon bumper as it is a little longer and helps "fill up" the long nose of this body
- I use the GFRP body post set (available through CRC) in the rear with this body. I use it on all four corners with other bodies
- I only glue my front tires half way up. Doing this has no impact on handling but will allow some rubbing of the track barriers.
-7/8 front tire traction (don't be afraid to reduce this if it is too much for you.)
If anyone has any questions, feel free to ask
Brian Wynn
Team CRC
- .45 1/10th front springs, kingpin almost touching the rim
- Mid track width in front
- 3/4 degree of camber
- 10 degree blocks (adjust shims as needed. Start all back, if car diffs out, start putting them forward one at a time until it stops)
- White center spring, stock shock oil
-.45 side springs, just touching, tweak from there
- 7k in the tubes
-very little rear droop. just enough to tell the pod is drooping
-200mm rear track width
-Battery in line to the front
-Speed control mounted behind battery, receiver in front of the battery
-Protoform GT body (when using this body, I use the #1757 carbon bumper as it is a little longer and helps "fill up" the long nose of this body
- I use the GFRP body post set (available through CRC) in the rear with this body. I use it on all four corners with other bodies
- I only glue my front tires half way up. Doing this has no impact on handling but will allow some rubbing of the track barriers.
-7/8 front tire traction (don't be afraid to reduce this if it is too much for you.)
If anyone has any questions, feel free to ask
Brian Wynn
Team CRC
#192
Yeah fan and bracket
Some pics of the Yeah Racing fan setup on one of my WGT-R/T cars...
#195
I believe that Dumper still only runs two at the rear of his car.
Bill