NEW XRAY T2

You're on Page 119 of 392
Go to
  • T2
    I looked at the car last night. What a piece!! The car is second to none! XRAY makes the best products period!! I've got a FK05 which I'm going to keep to run mod. My T2 should be in my hands on Monday. (Thought I was getting it on Friday but it got held up at UPS )
  • Quote: I lightly sanded the one side for the graphite plate, doesn't need much, in the areas in red below:

    Their is a new spur gear manufactor. Spurs will fit perfectly with zero modifications on both FK05 and the T2 platforms. No enlarging holes. Fits as easy as the XRAY gears. I've been running them for a month with 64 pitch and haven't stripped any gears. Anyone who try's them should be really happy with the quality. They also have titanium screw kits at really good prices.

    Here's the web address: WWW.JWERKSRC.COM
  • This car is awesome. Tons of steering and tons of corner speed. Xray really pulled it off with this car.


    On a side note. I decided to run a few more laps after my main yesterday. I didn't re-goop my tires and was sliding around. It felt good but, I ended up hitting a board and breaking a front arm. I really don't want to have to purchase a new kit to replace an arm but, if I have to, I will. However, if their are any guys who purchased another kit for parts and want to sell me an arm I will be more than willing to pay for it.

    PM me of you are interested.
  • Yup...the JWerks spur gear fits the T2 perfectly. They are made with super strong Delrin. Similar to the RW gears, but a bit wider and with the right holes for the screws. Machined in Japan, so very limited quantities here in the U.S. www.allspeedhobbies.com or www.victorracing.com have them I think. A lot of us here in NorCal has them in various cars for a while now, great spur, haven't had any problems with it.
  • Quote: Yup...the JWerks spur gear fits the T2 perfectly. They are made with super strong Delrin. Similar to the RW gears, but a bit wider and with the right holes for the screws. Machined in Japan, so very limited quantities here in the U.S. www.allspeedhobbies.com or www.victorracing.com have them I think. A lot of us here in NorCal has them in various cars for a while now, great spur, haven't had any problems with it.
    Do you have JWerks site?

    Thank you

    Nick
  • www.jwerksrc.com

    Quote: Do you have JWerks site?

    Thank you

    Nick
  • jWerks is great stuff
  • My cousins new xray T2
    here are some photos of my cousin's new ride. he's from california and he's looking forward to more racing he says. goodluck

    NEW XRAY T2-xray-t2-lr.jpg   NEW XRAY T2-xray-t2-rf.jpg   NEW XRAY T2-xray-t2-rf2.jpg   NEW XRAY T2-xray-t2-side.jpg   NEW XRAY T2-xray-t2-rf3.jpg  


  • What is the largest 64 pitch we can use on the T2?
  • think a 118, i have a 120 that im gonna try, but most say 120 wont fit but a 118 will.
  • I dont remember whose idea it was to countersink the spur gear for the spur screws for clearance... but it works like a charm. Trick too. SA-weet.



    - DaveW
  • Quote: I dont remember whose idea it was to countersink the spur gear for the spur screws for clearance... but it works like a charm. Trick too. SA-weet.



    - DaveW
    Let's see some pics, Dave!

    Or...

    Maybe the better pics from you will be in a couple of months when you have a dremel and too much time on your hands !
  • There was one at our local track last nite, its an awsome looking car. Anyone that questions the durability of the T2 should have been there lol. The driver that has the car hasnt been racing long, the car was very fast, and he stress tested every board he got close to, and never broke anything, Im not saying they are unbreakable, nothing is, but it no doubt lives up to xrays reputation of building tough cars, btw one of the faster drivers in this area ran some laps with it during practice, it was 3 to 4 tenths faster than his 05 by the third lap he ran ........
  • Quote: I dont remember whose idea it was to countersink the spur gear for the spur screws for clearance... but it works like a charm. Trick too. SA-weet.



    - DaveW
    What do you use to countersink the holes? Can I pick something up at the hardware store? Size?
  • you should be able to, its just a counter sink bit...there are bits with different degrees of cutting angle tho, so take one of the screws so you can check it and get the right one.....

Similar Threads