R/C Tech Forums - Novak Smart Tray problems

R/C Tech Forums (https://www.rctech.net/forum/)

- Electric On-Road (https://www.rctech.net/forum/electric-road-2/)

- - Novak Smart Tray problems (https://www.rctech.net/forum/electric-road/90975-novak-smart-tray-problems.html)

Khan48

11-17-2005 03:46 PM

Novak Smart Tray problems

baih	11-17-2005 03:57 PM

email novak. every other friday they close. not sure if they are working tomorrow.

dakrat

11-17-2005 04:58 PM

Quote:

Originally Posted by Khan48

I've been having the problem with two out of the three of my GP 3700 packs. Whenever i discharge these two all the ligts go out except for the far left negative one. I've let it sit there for literally 2 hours and it doesn't go out. Any ideas on the problem and how to fix it? Battery problem tray problem? Plz help.

are ur batts have charge in it? if it does, it might take a while since it have low discharge rate.

baih	11-17-2005 05:04 PM

did you use a discharger before you put the battery in the tray.

Doomah

11-17-2005 05:16 PM

use a multimeter to see the voltage of the far cell.

or put your aligator clips of you charger on the far cell and your charger should tell you the voltage of that cell

Khan48

11-17-2005 05:20 PM

Phatkat

11-17-2005 05:28 PM

The Smart Tray has a very low discharge rate. After a run, your cells will be unevenly discharged, hence the reason for an equalizer, but you should dump them on bulbs or something first. That will likely cure the problem. :)

dakrat

11-17-2005 05:37 PM

Quote:

Originally Posted by Khan48

the batteries were put on the tray after a run. also all the cells discharge quickly except for just that one.

after a run, 3700mah cells have plenty left. discharge them before equalizing.

TadehI

11-17-2005 06:00 PM

Ask Steve Weiss under Ask The Evicerator

TadehI

11-17-2005 06:02 PM

Ask Steve Weiss, he works for Novak. You can him in ask the EVICERATOR

All times are GMT -7. It is currently 09:36 AM.