Destiny VD12
#17
Tech Addict
iTrader: (14)
Since Xenon released the front end parts. We can put the front end on any R5 compatible car when availabe.
press release pictures
press release pictures
#18
Tech Apprentice
#19
Tech Master
iTrader: (20)
Yes, the car exists. Yes, it is going to be released. Yes, it is good. Setups should be available for the new CRC carpet right when the car is released, too, along with the setups Vesa has developed for Euro-style tracks.
My guess would be that IIC will be the first big race in the US where people are using this car. Should be available before then, though - from what I have heard.
My guess would be that IIC will be the first big race in the US where people are using this car. Should be available before then, though - from what I have heard.
#21
Tech Elite
iTrader: (65)
Xenon is selling the opt-0081 from their home site now to use the small dampeners on the front ends of Xenon suspension.
Anyone try these yet? Opinions? I think an advantage would be to eliminate all the gunk that accumulates on the kingpins when using lube on those. Can probably just run them dry or use a dry wax style lube for them now.
Aaron
Anyone try these yet? Opinions? I think an advantage would be to eliminate all the gunk that accumulates on the kingpins when using lube on those. Can probably just run them dry or use a dry wax style lube for them now.
Aaron
#22
Tech Master
iTrader: (1)
Last night I received a box with pre-production items for the Destiny VD-12 and will be building my car for IIC testing at Donny Lia's 360v2 track next weekend. If you are at the event, stop by and check it out there or the following weekend at The Gate in Cleveland. I'll post more pics as I get the car built but I am waiting for another box or two to arrive with motor plates and top plate. Production is going well but a few items are behind schedule so that's holding up the kit release. Hopefully, we will have 100% production parts come IIC time.
Any questions, let me know and I'll try to answer as I build!!
Any questions, let me know and I'll try to answer as I build!!
#23
Tech Regular
Last night I received a box with pre-production items for the Destiny VD-12 and will be building my car for IIC testing at Donny Lia's 360v2 track next weekend. If you are at the event, stop by and check it out there or the following weekend at The Gate in Cleveland. I'll post more pics as I get the car built but I am waiting for another box or two to arrive with motor plates and top plate. Production is going well but a few items are behind schedule so that's holding up the kit release. Hopefully, we will have 100% production parts come IIC time.
Any questions, let me know and I'll try to answer as I build!!
Any questions, let me know and I'll try to answer as I build!!
#25
Tech Apprentice
Lots of build process pics would be pretty cool.
Also some Features of the car with explaination and your thoughts about it.
Also some Features of the car with explaination and your thoughts about it.
#26
Not sure I understand the concept, isn't Destiny a spinoff of RPI? RPI already has a 1/12TH car, so why design another one? Has somebody some insights?
#29
Oh ok, I was pretty sure it was coming from the "Roche" constellation, like XEnon, Panaracer, etc.
Duly noted!
Duly noted!
#30
Tech Initiate