Deeds

iTrader: (10)

I thumbed thru the manual then got a little lazy...When cycling a battery can you set a delay between the charge and discharge? I know you can set a delay between cycles...but can you do it in the middle of a cycle? If you can't...why is that? The battery is pushing 125 degrees after the charge...then discharging at 30A really could roast a pack.

Tres

iTrader: (14)

Check out the expanded new manual.

http://www.competitionelectronics.com/GFX.html

jamescam

iTrader: (10)

On my T35 Stealth the time between charge & discharge is 15 seconds and can't be increased. I suggest you get a mini-fan and point it directly at the cycling pack.

Still Bill

iTrader: (16)

If you were running that charged pack and timed everything right, it would be starting its discharge at that 125 degree temp anyway. Therefore, I don't see any problem.

koabich

JRX-Bill is correct. Besides, I wouldn't recommend putting a fan on NimH cells when either charging or discharging as these celss perform better when 125-140 degrees. Putting a fan on them could effect their numbers.

danjoy25

iTrader: (38)

Just about to fork out on a as new GFX and would like to know the latest version software it should have or there is no such thing. Would also $325.00 shipped overseas sound reasonable?

Tres

iTrader: (14)

Current software version is 1.60 (variable motor run upgrade, adjust the voltage while the motor is running).