Track star turbo HELP
#1
Track star turbo HELP
'm new to electric r/c just got a sakura xi sport for a good deal.
But when u hook my battery up n turn the switch on the esc flashes red twice NO SOUNDS the fan turns on n stays on I plug my programming box (track star turbo) it comes on say push any button to start but nothing happens.
It didn't come with a reciver so I just tried to put in one from my traxxes nitro n use my traxxas remote n I can get anything to Happen.
Can I use the nitro reciver?
Why isn't the programmer working?
Why is there no beeping like I see on videos for this esc?
Is there a manual anywhere to no what means what for the esc?
Any help would be much appreciated thank
But when u hook my battery up n turn the switch on the esc flashes red twice NO SOUNDS the fan turns on n stays on I plug my programming box (track star turbo) it comes on say push any button to start but nothing happens.
It didn't come with a reciver so I just tried to put in one from my traxxes nitro n use my traxxas remote n I can get anything to Happen.
Can I use the nitro reciver?
Why isn't the programmer working?
Why is there no beeping like I see on videos for this esc?
Is there a manual anywhere to no what means what for the esc?
Any help would be much appreciated thank
#2
You first need to program the ESC to your traxxas remote I'm sure.
You'll want to make sure to set your endpoints correctly as well.
Then, once it's programmed (throttle, brake, neutral), hook the programming ox up to it to set the ESC settings (turbo, timing, etc.)
You'll want to make sure to set your endpoints correctly as well.
Then, once it's programmed (throttle, brake, neutral), hook the programming ox up to it to set the ESC settings (turbo, timing, etc.)
#3
Tech Elite
iTrader: (38)
Join Date: Jan 2015
Location: Hilagang-Silangan, Estados Unidos
Posts: 2,917
Trader Rating: 38 (100%+)
You first need to program the ESC to your traxxas remote I'm sure.
You'll want to make sure to set your endpoints correctly as well.
Then, once it's programmed (throttle, brake, neutral), hook the programming ox up to it to set the ESC settings (turbo, timing, etc.)
You'll want to make sure to set your endpoints correctly as well.
Then, once it's programmed (throttle, brake, neutral), hook the programming ox up to it to set the ESC settings (turbo, timing, etc.)
#4
Answer to questions.
1, Yes you can
2, cuz, b4 u use program card, RX & Esc has to be calibrated.
3, Same as above
4, You can find all manuals online
When you Calibrate make sure all trims set at 12 o'clock.
Calibrating sets the Neutral, Full throttle and braking positions.
What's your ESC model & manufacture? Manuals can be found on the web.
1, Yes you can
2, cuz, b4 u use program card, RX & Esc has to be calibrated.
3, Same as above
4, You can find all manuals online
When you Calibrate make sure all trims set at 12 o'clock.
Calibrating sets the Neutral, Full throttle and braking positions.
What's your ESC model & manufacture? Manuals can be found on the web.
Last edited by Geezatec; 08-29-2015 at 09:05 PM.