Motiv RC
|
|||
#16
Tech Master
iTrader: (39)
I can not fully answer your question because there are three different rotors for the M-codes motors. I bought a 21.5 that came with the "mid" rotor and was told the mid's range in a gauss reading anywhere from 1580 to 1620.
#17
H
#18
Hey all: Just curious is this Paul Lemieux's new company. If so what happened with his thunder power deal? Thanks
#21
Tech Fanatic
Anyone here have any experience with the Motiv batteries? Also curious about the weight of them.
#23
Rotor +1595 -1609
Stator A 13.0
Stator B 13.1
Stator C 13.2
On the second machine my rotor measured at right around 1480 on both sides, which was still exceptionally high compared to the (many) other rotors we have measured on that machine.
#24
Tech Champion
iTrader: (34)
Here are the numbers included with my motor (13.5T). I have measured the rotor on a second machine, but haven't done so with the stator. Not sure what good these numbers will be, but here you go:
Rotor +1595 -1609
Stator A 13.0
Stator B 13.1
Stator C 13.2
On the second machine my rotor measured at right around 1480 on both sides, which was still exceptionally high compared to the (many) other rotors we have measured on that machine.
Rotor +1595 -1609
Stator A 13.0
Stator B 13.1
Stator C 13.2
On the second machine my rotor measured at right around 1480 on both sides, which was still exceptionally high compared to the (many) other rotors we have measured on that machine.
#26
Tech Elite
iTrader: (37)
Thanks, guys. These numbers are right in line with what Paul said in response to my question submitted on the Motiv web site.
On another note, I didn't realize this was his company! I would have expected him to use the same name-- Gravity-- but I'm sure there is a good reason he didn't. No matter what the name, his customer service is always great!
On another note, I didn't realize this was his company! I would have expected him to use the same name-- Gravity-- but I'm sure there is a good reason he didn't. No matter what the name, his customer service is always great!
#27
#30
Impressive gauss readings on the rotor. Have never seen anything that high.