VBC WILDFIRE D07
#586
Tech Regular
maybe a D08 is on the way
#588
http://www.redrc.net/2015/09/soren-b...e/#more-101402
Here are also some nice videos from the 3 finals
A final 1 (rain at the start line)
https://www.youtube.com/watch?v=p9VSzga9Q0w
A final 2
https://www.youtube.com/watch?v=U_VIfBzaCW8
A final 3
https://www.youtube.com/watch?v=F6ql-ohZbuM
Here are also some nice videos from the 3 finals
A final 1 (rain at the start line)
https://www.youtube.com/watch?v=p9VSzga9Q0w
A final 2
https://www.youtube.com/watch?v=U_VIfBzaCW8
A final 3
https://www.youtube.com/watch?v=F6ql-ohZbuM
#591
Tech Master
iTrader: (61)
If anyone is interested in a spare car, or thinking about getting this car, look here.
http://www.rctech.net/forum/r-c-item...9-vbc-d07.html
http://www.rctech.net/forum/r-c-item...9-vbc-d07.html
#593
Dave is the best. I think he is now pretty much a one man show.
#594
Tech Apprentice
http://www.redrc.net/2015/09/soren-b...e/#more-101402
Here are also some nice videos from the 3 finals
A final 1 (rain at the start line)
https://www.youtube.com/watch?v=p9VSzga9Q0w
A final 2
https://www.youtube.com/watch?v=U_VIfBzaCW8
A final 3
https://www.youtube.com/watch?v=F6ql-ohZbuM
Here are also some nice videos from the 3 finals
A final 1 (rain at the start line)
https://www.youtube.com/watch?v=p9VSzga9Q0w
A final 2
https://www.youtube.com/watch?v=U_VIfBzaCW8
A final 3
https://www.youtube.com/watch?v=F6ql-ohZbuM
Nice job Soren,
are you still running shorty in the car or do you running stickpack?
#595
Yes I always run shorty cells
XciteRC 4600 80C
XciteRC 4600 80C
#596
Tech Apprentice
Hi SBH,
how do you balance out the chassis left-right? Shorty is in the 240g-ish weight area i think. That means a lot of additional weight.
Which front-rear weight bias do you prefer, or have checked on the scales? And at which position is it on the car? My TC is about 50,5% rear weight, but as i use normal size batts i cant really play with it. Thanks for your answers
how do you balance out the chassis left-right? Shorty is in the 240g-ish weight area i think. That means a lot of additional weight.
Which front-rear weight bias do you prefer, or have checked on the scales? And at which position is it on the car? My TC is about 50,5% rear weight, but as i use normal size batts i cant really play with it. Thanks for your answers
#597
Hi Worst87
I have moved my receiver so its behind the battery and the shorty pack is moved forward in the car. The rest is lead to the chassis (low weight) I dont recall the balance F/R, but for the next car I think I will try to move the shorty pack further back, and put more lead in front of the battery, to equalize the servo more.
I have moved my receiver so its behind the battery and the shorty pack is moved forward in the car. The rest is lead to the chassis (low weight) I dont recall the balance F/R, but for the next car I think I will try to move the shorty pack further back, and put more lead in front of the battery, to equalize the servo more.
#598
Tech Apprentice
VBC SORT THIS OUT NOW
I love my d07 however i have some major gripes that should be rectified - full stop, the end!!!!!!!!!!!!!!!!!
1. Easy one - In the manual, set up sheet, website, and in a you tube article - set out exactly where you measure downstop - just like Xray, Tamiya, Schumacher... Surely this thread would have clarified to VBC that this is an issue
2. For F***s sake - what is the part number for the V3 C hubs - and where can I get them - the UK importer - who I really like - are none the wiser
I LOVE THIS CAR, BUT VBC ARE DOING THEIR ABSOLUTELY BEST TO MESS THAT UP.
BTW - XRAY T3 FRONT END IS A DIRECT REPLACEMENT - ONLY THING IS MOVE THE FRONT ARMS FORWARD BY 2MM
1. Easy one - In the manual, set up sheet, website, and in a you tube article - set out exactly where you measure downstop - just like Xray, Tamiya, Schumacher... Surely this thread would have clarified to VBC that this is an issue
2. For F***s sake - what is the part number for the V3 C hubs - and where can I get them - the UK importer - who I really like - are none the wiser
I LOVE THIS CAR, BUT VBC ARE DOING THEIR ABSOLUTELY BEST TO MESS THAT UP.
BTW - XRAY T3 FRONT END IS A DIRECT REPLACEMENT - ONLY THING IS MOVE THE FRONT ARMS FORWARD BY 2MM
#599
There is no v3 c hub. Car comes with v2 c hub
#600
I love my d07 however i have some major gripes that should be rectified - full stop, the end!!!!!!!!!!!!!!!!!
1. Easy one - In the manual, set up sheet, website, and in a you tube article - set out exactly where you measure downstop - just like Xray, Tamiya, Schumacher... Surely this thread would have clarified to VBC that this is an issue
Just work around it, the starting, over ride height has been 5mm and 6mm for ever, go from there.
2. For F***s sake - what is the part number for the V3 C hubs - and where can I get them - the UK importer - who I really like - are none the wiser
If you look at the parts breakdown from your manual, the part numbers are V3-A03-P30270 and 271. If you look at part number (Version 2 D-05-VBC-0166) and look at the description of those parts they are actually the V3 c-hubs.
I LOVE THIS CAR, BUT VBC ARE DOING THEIR ABSOLUTELY BEST TO MESS THAT UP.
BTW - XRAY T3 FRONT END IS A DIRECT REPLACEMENT - ONLY THING IS MOVE THE FRONT ARMS FORWARD BY 2MM
Why would you?
1. Easy one - In the manual, set up sheet, website, and in a you tube article - set out exactly where you measure downstop - just like Xray, Tamiya, Schumacher... Surely this thread would have clarified to VBC that this is an issue
Just work around it, the starting, over ride height has been 5mm and 6mm for ever, go from there.
2. For F***s sake - what is the part number for the V3 C hubs - and where can I get them - the UK importer - who I really like - are none the wiser
If you look at the parts breakdown from your manual, the part numbers are V3-A03-P30270 and 271. If you look at part number (Version 2 D-05-VBC-0166) and look at the description of those parts they are actually the V3 c-hubs.
I LOVE THIS CAR, BUT VBC ARE DOING THEIR ABSOLUTELY BEST TO MESS THAT UP.
BTW - XRAY T3 FRONT END IS A DIRECT REPLACEMENT - ONLY THING IS MOVE THE FRONT ARMS FORWARD BY 2MM
Why would you?