butwhite

the part on the controller you turn

who makes one that is bigger or cooler

and how do you get foam for that?

TIA

butwhite

bump

Yeti35

iTrader: (5)

Check Horizon since they sell JR and also have the aftermarket steering wheels for them as well.

1fastdude

iTrader: (16)

I don't believe that there is a larger wheel for the R-1. The after market wheels are for other JR Radio's other than the R-1. You can probably get a donut foam and put it on your R-1 wheel.

butwhite

thank you for the replies

dsrbltoys

iTrader: (1)

The M8 uses the same square mount, I have a carbon one on mine (like the momo) but the jr is made for a more offset wheel. so the m8 wheel sticks out a bit, maybe 1/4 inch

butwhite

that is awsome thanks for the info

dsrbltoys

iTrader: (1)

ok, I looked a little closer. The hex on the back of the m8 wheel starts flush. The jr wheel, well, if you look at the wheel, you can see how far out it will set. maybe closer to 1/2 inch

Sokool

Dynamite makes them for the XR series they fit just need a longer 3mm screw to go deeper into the socket to hold it on. They are cool billet aluminum in the shape of BBS wheels they come in blue, gold, and red. Check them out HERE

I have the gold one on my R-1. I'll see if I can't snag a picture here soon.

Sokool

Here is the pic I promised....

DIMO

If only they had the cool thing like ko propo, the touring car weel adapter soo cooooooooooooool

butwhite

thank you sooo cool

R-1 rocks!!