Tamiya TRF419
#4216
Tech Addict
Is this a 419 or a frankenstein chassis? Find It online and the guy wants 95 bucks for it. Need Some care though. To my best knowledge, It is clearly not a 417 v5... I have no idea where this chassis has been through though...
Last edited by zxcvb1t; 10-28-2020 at 10:41 AM.
#4217
Tech Adept
Looks like 419 but I would ask for more pictures.
#4218
Some parts are not original kit standard.
#4219
Tech Addict
Thanks, guys. Guess I'll just take the gamble and not inform the seller. He has no idea that this is a 419 rather than a 417...
#4220
Tech Master
It looks like a 417 with a raceberry chassis conversion on it. With Tamiyas most recent suspension as well
#4222
#4223
Tech Adept
This is Tamiya 54544 /TA06/ - fits plug and play into TRF419X/XR/WS.
#4224
#4225
Tech Adept
You do not need shorter ones in 419X - works fine, I use them as well. Plastic inserts are far better and cheaper from Radtec ( Radtec Yokomo BD7 POM C-Blade 3,5mm /Tonisport) or Techra ( Techra Yokomo BD7 / BD8 Delrin Drive Shaft Replacement Cap ).
In case of TB04 - they fit but shorter shafts are needed.
In case of TB04 - they fit but shorter shafts are needed.
#4226
Tech Apprentice
Hi there. I have a trf ta07ms which shares the same suspension components as the 419. My question is. If I intend in the future, can I bolt my suspension arms etc to a 419xr conversion kit. From what I can see the differences between the 2 are bottom top, decks, bulk heads and motor mount .
#4227
Tech Addict
Hi there. I have a trf ta07ms which shares the same suspension components as the 419. My question is. If I intend in the future, can I bolt my suspension arms etc to a 419xr conversion kit? From what I can see the differences between the 2 are bottom top, decks, bulkheads and motor mount.
#4228
Tech Apprentice
Yes, you can. just make sure the dampers you are using matching the arms (418 and 419 arms look similar from far but the damper holes on it are slightly different. I don't know if the 07ms is using ssbb dampers or regular trf dampers). Tamiya suspension has good compatibility after 416 style suspension was introduced.
Thanks
#4229
Hi there. I have a trf ta07ms which shares the same suspension components as the 419. My question is. If I intend in the future, can I bolt my suspension arms etc to a 419xr conversion kit. From what I can see the differences between the 2 are bottom top, decks, bulk heads and motor mount .
Btw suspension arms from 07MS are #54691 and they are the 419X ones.
Last edited by Tom1977; 01-19-2019 at 01:50 AM.
#4230
Tech Elite
iTrader: (45)
swapped to yokomo 2.6-3.0 progressives in the front, 3.0 linears in the rear and 450cst all the way around today. car was really good. i actually screwed up my sauce for the main as grip didnt come up as high as i would have liked so car was a bit pushy in the main.
overall this was good on black carpet with an other wise stock 419x
overall this was good on black carpet with an other wise stock 419x