Tamiya TRF419
#3676
#3677
Hi,
I use axon spur and add 0.2mm spacer to stop the play. I also experience that different shimming needed for different brands. I start shimming step by step, once it become smooth I leave it. I believe correct shimming is important... car feels better. cheers
I use axon spur and add 0.2mm spacer to stop the play. I also experience that different shimming needed for different brands. I start shimming step by step, once it become smooth I leave it. I believe correct shimming is important... car feels better. cheers
#3678
Even the kit spur gears from Tamiya have a little play. Never shimmed them but seems a good idea.
#3680
It can be also, size&widht of e-ring (clips) can be different, (bearings can make also a bit of play - they are not exactly the same “size”)...not just at pulley but on the wheel nuts. If no play and smooth running nothing else you need .
Btw - Manual also suggest what to use and when. So shim only if it is needed....0.15, 0.25 shims also available for pulley as well. Worth to have it on stock in case needed.
I usually put as much shim to overshim and step by step (0.05) go down till i find smooth running without too much play.
Btw - Manual also suggest what to use and when. So shim only if it is needed....0.15, 0.25 shims also available for pulley as well. Worth to have it on stock in case needed.
I usually put as much shim to overshim and step by step (0.05) go down till i find smooth running without too much play.
#3686
Tech Apprentice
419XR
Any thoughts on this scenario?
419X WS kit + XR conversion, to be used on medium grip carpet - use the XR carbon chassis and top deck, or the WS alloy chassis and carbon top deck?
419X WS kit + XR conversion, to be used on medium grip carpet - use the XR carbon chassis and top deck, or the WS alloy chassis and carbon top deck?
#3688
For those in the US that have been looking for the 419xr conversion, RC Mart now has them in stock and I just ordered mine!
#3689
Tech Elite
iTrader: (3)
Its kind of funny that with a Worldwide Release Date (20JAN2018) that the American stores still dont have them listed yet.. Big hooplah about a release date.... but....
there is something wrong with the 'system'
I guess you can technically go buy direct from Tamiya USA since its listed and available there.
In the gaming industry 20JAN2018 meant that I could stand in line at 11:55pm 19JAN2018 and have it in my hands in 5minutes..
there is something wrong with the 'system'
I guess you can technically go buy direct from Tamiya USA since its listed and available there.
In the gaming industry 20JAN2018 meant that I could stand in line at 11:55pm 19JAN2018 and have it in my hands in 5minutes..
#3690