65LikesSpeedmerchant Roadkill 10 235mm Pro10 Pancar
08-12-2014, 10:09 PM
#166
ok thanks, i should have it all, still waiting for the kit to be shipped.
08-12-2014, 10:43 PM
#167
I'm still waiting
08-13-2014, 02:16 PM
#171
Hi Guys,
The rest of the RK10's will ship by tomorrow night.
Just wanted to make sure no one thought they were missed. Just tackling orders as they came in.
Hey John, 4 degrees caster 1.5 camber should be a good starting point. 7 is a ton for the New School. At big races, we usually go down to 2-3 degrees caster and .5 camber. You don't have to crank caster into a New School to get it to steer.
Can't wait to see some vids. Stay off the boards.
-Bruce
The rest of the RK10's will ship by tomorrow night.
Just wanted to make sure no one thought they were missed. Just tackling orders as they came in.
Hey John, 4 degrees caster 1.5 camber should be a good starting point. 7 is a ton for the New School. At big races, we usually go down to 2-3 degrees caster and .5 camber. You don't have to crank caster into a New School to get it to steer.
Can't wait to see some vids. Stay off the boards.
-Bruce
08-13-2014, 06:46 PM
#172
Hi Guys,
The rest of the RK10's will ship by tomorrow night.
Just wanted to make sure no one thought they were missed. Just tackling orders as they came in.
Hey John, 4 degrees caster 1.5 camber should be a good starting point. 7 is a ton for the New School. At big races, we usually go down to 2-3 degrees caster and .5 camber. You don't have to crank caster into a New School to get it to steer.
Can't wait to see some vids. Stay off the boards.
-Bruce
The rest of the RK10's will ship by tomorrow night.
Just wanted to make sure no one thought they were missed. Just tackling orders as they came in.
Hey John, 4 degrees caster 1.5 camber should be a good starting point. 7 is a ton for the New School. At big races, we usually go down to 2-3 degrees caster and .5 camber. You don't have to crank caster into a New School to get it to steer.
Can't wait to see some vids. Stay off the boards.
-Bruce
Do I understand that at some point in time you plan to offer the RK10 in a full blown kit?
I'm in for another...just say'in.
08-13-2014, 08:09 PM
#173
ESC and motor had a fight over the sensor board. The motor lost. It made a sizzling sound, then let the magic smoke out. The controller was acting odd and wouldn't talk to the programming card or the PC before I ran it. I pulled both motor and ESC out of the car. I put the motor on the checker and its spinning at half the speed and pulling twice the current. Somehow the sensor board checks good. So I hooked the ESC to the card and computer with nothing else attached and was able to communicate. I reflashed it successfully, attached to another motor, synced it to the radio and it is alive. I think I escaped serious damage, but did short the windings in the can. So sad.
08-13-2014, 08:26 PM
#174
That is good to hear the kits will be shipped off soon.
Got one question what front springs comes with the kit.
Got one question what front springs comes with the kit.
08-14-2014, 10:37 AM
#178
Awesome! Can't wait to get mine
