R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   TC alignment? (https://www.rctech.net/forum/electric-road/807686-tc-alignment.html)

d16dcoe45 04-17-2014 06:33 AM

TC alignment?
 
I have a question thats been bugging me that I haven't seen a clear answer to. Up to this point I have been measuring camber but "eyeballing" toe . I just got a setup station and noticed my eyeballing has equaled roughly 1 deg toe-out each side for a total of 2 degree between the wheels. When a setup sheet says "1 degree toe-out" is that TOTAL--between both wheels or does that mean EACH side is 1/2 degree for a total of 1 degree?

I hope I worded it in a way thats easy to understand, I am just confused if 1 degree toe-out means 1 degree each side or 1/2 degree each side (on a setup station) for a TOTAL included angle of 1 degree?

locked 04-17-2014 06:37 AM

It would mean 1 degree on each side.

Skiddins 04-17-2014 07:06 AM

Toe and camber etc are always measured 'on one side'

d16dcoe45 04-17-2014 08:54 AM

thanks guys. :-)


All times are GMT -7. It is currently 03:03 AM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.