Xray T4'14
#1071
Tech Addict
iTrader: (19)
Apex Racing in Hawaii has all the parts in stock I believe, and it will be high dollar to piece a '14 together. Better off buying a new one, or the RSD V2 full chassis conversion kit.
http://www.apexrcproshop.com/index.p...th=146_166_198
http://www.reflexracing.net/RSD-RX4V...n-_p_2130.html
http://www.apexrcproshop.com/index.p...th=146_166_198
http://www.reflexracing.net/RSD-RX4V...n-_p_2130.html
#1072
Tech Apprentice
hi guys, I am sure this has be raised but to get the quick answer without trawling 1000 pgs..... what do i need to do to get the pinion to line up with the spur. it seems whichever way i put it on I can get the whole gear to engage, have I built something wrong, this seems very strange to me that a standard pinion doesnt work with the spur that came with the kit! thanks
#1073
hi guys, I am sure this has be raised but to get the quick answer without trawling 1000 pgs..... what do i need to do to get the pinion to line up with the spur. it seems whichever way i put it on I can get the whole gear to engage, have I built something wrong, this seems very strange to me that a standard pinion doesnt work with the spur that came with the kit! thanks
#1074
Tech Master
iTrader: (49)
hi guys, I am sure this has be raised but to get the quick answer without trawling 1000 pgs..... what do i need to do to get the pinion to line up with the spur. it seems whichever way i put it on I can get the whole gear to engage, have I built something wrong, this seems very strange to me that a standard pinion doesnt work with the spur that came with the kit! thanks
#1076
Tech Elite
iTrader: (93)
There are a few pinions that I have (all really cheap brands) that are just too wide to fit without modifications to something. I prefer the CRC pinions as I don't have to mess with anything. Just run them with the set screw out like daleburr suggested. I don't have any of the Xray pinions but I imagine they would fit without issue as well.
#1077
Tech Regular
130 USD and delivered by RCmart HK.
I must say my T4'13 was in good chape, and i did compete with it in and outdoor in the 13.5 class.
As my T4'13 was wear out then I buy the 14.
If I sold my T4'13 it cost a lot more to get me a T4'14.
#1078
Tech Regular
iTrader: (2)
There are a few pinions that I have (all really cheap brands) that are just too wide to fit without modifications to something. I prefer the CRC pinions as I don't have to mess with anything. Just run them with the set screw out like daleburr suggested. I don't have any of the Xray pinions but I imagine they would fit without issue as well.
#1079
Tech Elite
iTrader: (93)
I have convert my T4 to T4'14 with original Xray parts and it cost me around
130 USD and delivered by RCmart HK.
I must say my T4'13 was in good chape, and i did compete with it in and outdoor in the 13.5 class.
As my T4'13 was wear out then I buy the 14.
If I sold my T4'13 it cost a lot more to get me a T4'14.
130 USD and delivered by RCmart HK.
I must say my T4'13 was in good chape, and i did compete with it in and outdoor in the 13.5 class.
As my T4'13 was wear out then I buy the 14.
If I sold my T4'13 it cost a lot more to get me a T4'14.
#1080