danjoy25

iTrader: (38)

any updates yet?

Jack Smash

iTrader: (34)

I've got a dead GT7 that im waiting to send in to upgrade to GTB!

Solara

iTrader: (17)

Compare to the almost 12 months delay from the "OTHER" brushless system, a month or several weeks of delay is acceptable....as long as they are clearing most of the bugs before releasing....or better yet, no bugs at all.....

AdrianM

iTrader: (4)

It took 3 years from the first time Novak said it would be out next month for Novaks first brushless motor to hit the market.

Sit tight. The Mods will be great when they come out.

glide 1

AHHHH.....it should be out sooooon!!! will keep checking here for any developments.

can anyone post a list of all the stores that will be selling the GTB please, thanks.

newracer

You will be waiting for a while. Novak customer service told me that they would not be doing any upgrades to the GTB for at least 9 months after it is released.

UnderDaHill

I did notice some new pictures on the novak website for the GTB. Looks like it will come with a fan installed on the heatsink now. The motor picture is also a bit more detailed if I remember right.

Somerwil

iTrader: (1)

What silly individual thinks that ridiculous ventilation thing on the new pictures will fit a normal buggy? PFFFFFFFF, the Sphere needs a heat sink which won't fit my car, the new Novak system has a ventilation unit on it...

When does somebody come up with a brushless system to fit a normal 2WD buggy?!?!?!?!?!?!?!?!?!?! I think it's ridiculous! At first they make you happy with nothing... The Sphere was always shown without heat sink up to a few days before its release. The GTB had no fan on it on the first pictures, but now, a few days before the release, is has got one....

I'm very disappointed again, this time in Novak!

Gr,
Mike

UnderDaHill

My guess is that you will not need the heatsink when running the milder motors like the 5800 and 4300.

ffactory666

iTrader: (19)

No need to be dissapointed Somerwil.
The GTB with fan fits the Losi no prob and fits the B4 , however it is a tight fit in the B4 so you can run the fan on it's side.

Charlie from Novak can step in here and confirm this as he posted this in another forum.

Somerwil

iTrader: (1)

That will be great ffactory! So I assume you detach the fan and place it vertically next to the speedo?

Thanks,
Mike

ffactory666

iTrader: (19)

Yep , that's the way i understood the thread on the other forum.

If Charlie reads this , he can confirm.

Charlie

Hey Guys,

Yes, we ran the fan on top of the GTB Heatsink on a Losi Buggy with the Standard body. You can leave a little extra room depending on how you mount it. We just used the standard Cut Line on the bottom of the body. It can also be done with the B4, but the racer had his body mounted a bit lower then normal.

You can use a buttonhead screw to prevent the body from rubbing the fan as well.

The fan will have enough wire to move around the car as needed. We've put a fan in front of the ESC blowing back at it as well. For most 2wd applications the fan will not be as crucial.

Thanks
Charlie

mtveten

iTrader: (29)

Charile,

What turn would the 5.5 and 6.5 brushless motors be eqivelent too in a brushed motor? Are we looking and like 8 & 10T equivents or more like a 11 - 14T range.

Mark

Jack Smash

iTrader: (34)

Dang it!