Acid_CZ

https://www.tamiyausa.com/product/it...oduct-id=84381

texastc

iTrader: (2)

Im not trying to hijack or bring back a zombie post, But I have been out of the hobby a few years and found some good deals on new to me kits, like this one. And of all the different F1 cars I have had this is the first real Tamiya. And I am impressed. Im reading this thread and only on page 3 but had one of my questions already answered. I am looking forward to hitting the track and a few boards very soon. Thanks

texastc

iTrader: (2)

I finally hit the track with my TRF101 this past weekend. I didn't make a lot of laps and the ones I did I was taking it easy being first time on carpet in 4 years, first time on the Black carpet ever, and the first time I drove the 101. I will say that I was very impressed and if I could have ran some more I could have been a lot faster. My first timed lapped matched my fast lap in my old Exotek F1Ultra 200mm car. And I made no adjustments since I built car with the exception of taking out some excess rear droop. I had the gearing all wrong and needed to drop several teeth on the pinion. But self induced technical failures ended the day (forgot soldering iron and made a bad A wire solder. That said I expect to drop at least a second per lap next time out and maybe more if I really ring it out.

jujubean

iTrader: (1)

Hi. I am looking for a very thin spur gear adaptor. any suggestions?

mleemor60

iTrader: (28)

A few minutes with what you have and a piece 220 grit sandpaper would certainly do the trick.

Ph3nyx

Tamiya 54215

xps800doo

iTrader: (7)

101 and 102 spare part blow out!

http://www.rctech.net/forum/r-c-item...amb-roche.html

j rabbit

iTrader: (10)

hey new to f1 racing
bought a 101w I believe it was listed as a 104 but anyways lol gonna race at a tcs race and looking for some pointers of where to position battery from front to back running a justock esc and reedy 25.5 motor with the tcs tires

texastc

iTrader: (2)

I run my battery just behind servo with justock behind battery

xtrememadness

iTrader: (2)

does anyone have a decent starting setup for running on black crc carpet with Tamiya tcs tires. thanks

texastc

iTrader: (2)

honestly I run mine with stock set up out of the box but with the Fenix diff and its great, and it wasn't too much different when running the Tamiya diff. Car is way better than me.

j rabbit

iTrader: (10)

does anyone have a spare 101 front end carbon fiber theyd wanna sell i have a wide one but wanna try running the narrow one

BP SHADOW

iTrader: (24)

Yes I have the upper arm in stock, you will also need the stock 104 plastic lower

dman18t

Been running my TRF 101 for many years. Any advice on front suspension options? I can finish the season if I can replace the front end. (Never really liked the front end). Any other options out there, like 2 piece upper arms design? Not seeing much and I can't get spares to replace the existing top ball holders (camber adjust blue) or steering knuckles. Thanks.

BP SHADOW

iTrader: (24)